Advertisement
Table of Contents
- 1 Product Models
- 2 Unpack the HPE Storeeasy 1X60 Storage System
- 3 Installing the Rail Kits and Mounting the System in a Rack
- 4 Cabling the Storeeasy System to the Network
- 5 Power on Initial Startup Sequence
- 6 Next Steps
- 7 Warranty and Regulatory Information
- 8 Belarus Kazakhstan Russia Marking
- 9 Warranty Information
- 10 Turkey Rohs Material Content Declaration
- 11 Ukraine Rohs Material Content Declaration
- Download this manual
HPE StoreEasy 1X60 Storage Quick Start
Guide
Abstract
This document provides system administrators step-by-step instructions for setting up an HPE
StoreEasy 1X60 Storage system for the first time. After deployment of the system, HPE
recommends you to read the StoreEasy 1X60 Administration Guide to learn how to configure and
maintain all models of HPE StoreEasy 1X60 Storage.
*P05633-001*
Part Number: P05633-001
Published: March 2018
Edition: 1
Advertisement
Table of Contents
Related Manuals for HP StoreEasy 1X60 Series
Summary of Contents for HP StoreEasy 1X60 Series
- Page 1 HPE StoreEasy 1X60 Storage Quick Start Guide Abstract This document provides system administrators step-by-step instructions for setting up an HPE StoreEasy 1X60 Storage system for the first time. After deployment of the system, HPE recommends you to read the StoreEasy 1X60 Administration Guide to learn how to configure and maintain all models of HPE StoreEasy 1X60 Storage.
- Page 2 © Copyright 2018 Hewlett Packard Enterprise Development LP Notices The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
-
Page 3: Product Models
Product Models The installation instructions provided in this document apply to the StoreEasy 1X60 Storage system which covers the following HPE StoreEasy 1000 Storage models: • HPE StoreEasy 1660 Storage • HPE StoreEasy 1860 Storage • HPE StoreEasy 1460 Storage •... - Page 4 • On a label (1) affixed outside the HPE StoreEasy 1X60 Storage shipping box • Top (1) of the HPE StoreEasy 1X60 Storage chassis (some models) • Inside (1) of the HPE StoreEasy 1X60 Storage chassis (some models)
- Page 5 • Pull out serial number tab (1) on the product...
-
Page 6: Installing The Rail Kits And Mounting The System In A Rack
The COA label Product ID key is required when: • The WSS2016 operating system has been reinstalled. • The motherboard of StoreEasy 1X60 product is replaced. • The original factory-installed operating system is upgraded to a newer version of WSS operating system. The iLO Advanced Security license key is required when: •... - Page 7 WARNING: • The rail kits, when installed, form only a shelf for the StoreEasy 1X60 to rest on. The StoreEasy 1X60 is not attached to the rail by any other means. Use extreme caution when pulling the StoreEasy 1X60 out from the rack. The storage system can slip and fall, which may cause damage or injury to the StoreEasy 1X60 Storage.
- Page 8 3. To secure the StoreEasy 1X60 to the rails, the Configure-to-Order (CTO) bracket at the rear ends of the rails must overlap the chassis tab as shown in Figure 2. Figure 2: CTO bracket location 4. Secure the StoreEasy 1X60 to the rack rails using thumbscrews on the front bezel as shown in Figure 3. Figure 3: Secure StoreEasy 1X60 to the rack 5.
-
Page 9: Cabling The Storeeasy System To The Network
Figure 4: Cable management with tie wraps 6. Connect all power cords to the facility power source. 3. Cabling the StoreEasy system to the network The iLO network port is used to remotely manage the StoreEasy 1X60 hardware and allows administrators to launch a remote console session to the system. - Page 10 PCIe Slot 1 PCIe Slot 2 PCIe Slot 3 FlexLOM PCIe Slot PCIe Slot PCIe Slot Description (x8) (x16) (x8) Slot 4 (x8) 5 (x16) 6 (x8) Primary Riser Secondary Riser HPE M.2 Kit Slot Not Slot Not Slot Not Slot Not Slot Not Slot Not...
- Page 11 Figure 7: Rear view of the StoreEasy 1560 Storage system Network Ports iLO Port PCIe Slot 1 PCIe Slot 2 PCIe Slot 3 PCIe Slot 4 Description PCIe Slot 5 (x8) (x16) (x8) (x8) (x16) P408i-p Not available PCIe x8 PCIe x16 4.
-
Page 12: Power On Initial Startup Sequence
IMPORTANT: If the StoreEasy 1X60 Storage system is attached to an external storage, including JBODs, power on the external storage system before you power on the StoreEasy 1X60 Storage system. 5. Power On Initial Startup Sequence Before using the HPE StoreEasy Management Console (SEMC) as the primary management tool, complete the initial startup sequence. - Page 13 1. Select your preferred language. 2. Read and accept the license terms. 3. Set the local Administrator password. Once these steps are complete, log in with the previously set administrator credentials. A post-installation process automatically starts and takes approximately 10-15 minutes. The system reboots at the end of the post installation.
-
Page 14: Next Steps
Figure 9: Initial Configuration Tasks If ICT does not launch automatically, press Windows + R on your keyboard, type OEMOOBE and click OK. Next Steps You can perform the following tasks using the ICT: • Update the system settings such as, changing the local Administrator password and time zone. •... -
Page 15: Warranty And Regulatory Information
Warranty information To view the warranty for your product or to view the Safety and Compliance Information for Server, Storage, Power, Networking, and Rack Products reference document, go to the Enterprise Safety and Compliance website: www.hpe.com/support/Safety-Compliance-EnterpriseProducts Additional warranty information HPE ProLiant and x86 Servers and Options www.hpe.com/support/ProLiantServers-Warranties HPE Enterprise Servers www.hpe.com/support/EnterpriseServers-Warranties... -
Page 16: Turkey Rohs Material Content Declaration
Local representative information Kazakh: • Russia: • Belarus: • Kazakhstan: Manufacturing date: The manufacturing date is defined by the serial number. CCSYWWZZZZ (serial number format for this product) Valid date formats include: • YWW, where Y indicates the year counting from within each new decade, with 2000 as the starting point; for example, 238: 2 for 2002 and 38 for the week of September 9.