Operation Panel - Sony HXC-100 Operating Instructions Manual
Hd color camera
Hide thumbs
Also See for HXC-100:
- Service manual (206 pages) ,
- Operating instructions manual (149 pages) ,
- Service manual (130 pages)
Advertisement
e INTERCOM connector (XLR 5-pin)
Connect an XLR 5-pin headset for input and output of intercom
audio signals.
The connector can be used for communication over the
engineer line when the camera is in standby status.
f EARPHONE jack (stereo minijack)
For connecting an earphone for output of the intercom audio.
g Connector panel (See "Connector panel" on page 10.)
h CAMERA POWER switch and indicator
CCU: To operate on power supply via the connected CCU.
EXT: To operate on power supply through the DC IN
connector.
The indicator is lit in green during operation. It is lit in red while
standby power is being supplied from the CCU, even if the
switch is set to OFF.
Note
When a CCU is connected, external power supply (EXT)
cannot be used.
i CALL button
When you press this button, the red tally lamp of the
connected external control device (RCP/RM, HKCU-FP1, etc.)
will light. Use to call the operator of the external control device.
j Shoulder pad
You can adjust the position on your shoulder.
For details, see "Adjusting the Shoulder Pad Position" (page
14).
Operation panel
UC type: Model for NTSC areas
1
RET1
RET
PGM1
LEVEL
MIC
REAR
ON
FRONT
OFF
INCOM
PROD
ENG
INTERCOM
EARPHONE
6
7
8 9
a RET 1 (return video 1) button
The return video signal is displayed on the viewfinder screen
while the button is held pressed.
b RET (return video) button and 2/3/4 (return video 2/3/4)
select switch
When other return video systems are used in addition to return
video 1, the signal selected with the 2/3/4 switch is displayed
on the viewfinder screen while holding the RET button
pressed.
Note
The RET 1 button has priority over the RET (2/3/4) button if
both buttons are pressed.
2
3 4
5
2 3 4
PGM2
ASSIGNABLE
DISPLAY
OFF
MENU
c DISPLAY/MENU switch
This switch functions the same as the DISPLAY/MENU switch
on the front (page 7).
d ASSIGNABLE button
You can assign a function with ASSIGNABLE REAR on the
<SWITCH ASSIGN1> page of the OPERATION menu.
e Menu control knob (rotary encoder)
This knob functions the same as the menu control knob on the
front (page 8).
f LEVEL/MIC (intercom level control/microphone)
switch
To determine whether to use the INTERCOM LEVEL control
(page 8) on the front and to turn the intercom headset
microphone ON/OFF.
Switch position
INTERCOM LEVEL
control on the front
REAR/ON
Inactive
REAR/OFF
FRONT/OFF
Active
g Line select switch
To select the intercom line:
PROD: Producer line
ENG: Engineer line
h INCOM (intercom) level control
To adjust the intercom audio listening level.
i PGM1 (program 1) and PGM2 (program 2) controls
To adjust the audio listening level of program 1 or program 2,
respectively.
CE type: Models for PAL areas
1
2
RET1
RET
PGM1
PGM2
MIC
LINE
PROD
OFF
ENG
LEVEL
ENG
PROD TRACKER
REAR
FRONT
INTERCOM
EARPHONE
6
7
8
9
0
1 to 5 are the same as those of the UC type.
f MIC LINE (intercom microphone line) switch
To select the talk line for intercom:
PROD: To talk over the producer line
OFF: To turn off the headset microphone for the intercom line
ENG: To talk over the engineer line
g LEVEL switch
REAR: The intercom audio listening level is adjusted with the
ENG or PROD control on this panel.
FRONT: The levels adjusted on the rear panel can be totally
adjusted with the INTERCOM LEVEL control on the front.
h ENG (engineer line) control
To adjust the intercom audio listening level of the engineer line.
Headset microphone
ON
OFF
3 4
5
2 3 4
ASSIGNABLE
DISPLAY
OFF
MENU
qa
Overview
9
Advertisement
Chapters
