Appendix A. Storage Subsystem Id And Records - IBM TotalStorage DS300 Hardware Installation And User's Manual
Hide thumbs
Also See for TotalStorage DS300:
- Best practices manual (680 pages) ,
- Hardware installation and user's manual (110 pages) ,
- Quick installation manual (13 pages)
Table of Contents
Advertisement
Appendix A. Storage subsystem ID and records
Record information about the storage subsystem in Table 9. You will need this
information if you have to call for service.
Table 9. Product identification record
Product name
Machine type
Model number
Serial number
Controller #1 serial number
Controller #2 serial number
The storage subsystem serial number is on the front bezel and on the system label
on the rear of the storage subsystem. The controller serial number is on the
lower-right side of the RAID controller (at the rear of the storage subsystem).
Use Table 10 to keep a record of the options that are installed in or attached to the
storage subsystem. This information can be helpful when you install additional
options or if you have to report a hardware problem. Make a copy of this table
before recording information in it, in case you need extra space to write new values
later, or when you update the storage subsystem configuration.
For a list of supported options for the storage subsystem, see the ServerProven
Web site at http://www.ibm.com/pc/compat/.
© Copyright IBM Corp. 2004, 2005
Table 10. Drive location information record
Drive part and
Drive location
model number
Bay 1
Bay 2
Bay 3
Bay 4
Bay 5
Bay 6
Bay 7
Bay 8
Bay 9
Bay 10
Bay 11
Bay 12
Bay 13
Bay 14
IBM TotalStorage DS300 or IBM TotalStorage DS400
Drive serial
number
SCSI channel
SCSI ID
2
0
2
1
2
2
2
3
2
4
2
5
2
8
1
9
1
10
1
11
1
12
1
13
1
14
1
15
83
Advertisement
Table of Contents
