Table of Contents
Advertisement
#
FDDI card.
#
may be different from the physical interface on
#
the card, depending on the single- or dual-
#
attachedness of the various interfaces.
#
"gf073" specifies the bottom-most connector
#
on the FDDI card in slot 7; "gf020" specifies
#
top-most connector on the FDDI card in slot 2,
#
or the top TWO connectors on that card if they're
#
configured dual-attached.
#
#
For ETHERNET cards, the fifth character will be 0, 1,
#
2, 3, 4, 5, 6 or 7 to specify the physical interface
#
on the ETHERNET card.
#
Examples:
#
"ge067" specifies the 8th physical connector
#
on the ETHERNET card in slot 6.
#
"ge000" specifies the first (top) connector on the
#
ETHERNET card in slot 0.
#
"ge0f7" specifies the last (bottom) connector on the
#
ETHERNET card in slot 15.
#
#
For HIPPI cards, which only have one interface,
#
the fifth character is always 0.
#
"gh0f0" specifies the interface for a HIPPI card
#
in slot 15.
#
# The IP "address", "netmask" (optional), and "broad_dest" (optional)
# address fields must be specified in canonical IP dotted-quad notation.
# An entry of "-" (a single hyphen) may be specified for any of these
# fields as a place-holder.
# is desired but a broadcast or destination address must be specified
# in the next field.
#
#
# For this release, the "broad_dest" field specifies the broadcast
# IP address for Ethernet & FDDI interfaces, and the destination of
# a point-to-point ATM or HIPPI interface.
#
# The "arguments" field is for any additional arguments to be supplied
# to the underlying ifconfig(8) command that will be executed by
# grifconfig(8).
The most useful purpose would be to specify an
# MTU value for the interface using the "mtu" keyword of ifconfig(8).
# The keyword "iso" can also be specified here which designates the current
# line as an iso address entry.
# See the example entry below, and the man page for ifconfig(8).
#
#
# NOTE: All interface names are case sensitive ! Always use lower case letters
#
when defining interface names.
#
#
# name
address
#
#de0
192.0.2.1
lo0
127.0.0.1
#gl000
127.0.1.1
# configuration for iso addresses
#gf0xx
49.0000.80.3260.3260.3260.00 49.0000.80 -
# All possible IOSTB3 Interfaces
# gt000 0.0.0.0
255.255.255.0
#gt010
0.0.0.0
255.255.255.0
NOTE:
The logical interface number
Example:
This may be useful, e.g., if no netmask
netmask
broad_dest
255.255.255.0
192.0.2.255
255.0.0.0
-
mtu 65520
-
mtu 65520
Examples:
arguments
mtu 1024
iso
GRF Configuration Files
283
Advertisement
Table of Contents
