Related Manuals for Kenwood KDC-2021S
Summary of Contents for Kenwood KDC-2021S
-
Page 1: Instruction Manual
KDC-2021S CD-RECEIVER INSTRUCTION MANUAL CD RECEIVER GEBRUIKSAANWIJZING REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM MANUAL DE INSTRUCCIONES CD-RECEIVER BRUKSANVISNING CD-VASTAANOTTIMEN KÄYTTÖOHJE © B64-2232-00 (EY) -
Page 2: Table Of Contents
Contents Safety precautions...3 About CDs...5 General features ...6 Power Selecting the Source Volume Attenuator Loudness System Q Audio Control Speaker Setting Clock Display Adjusting Clock DSI (Disabled System Indicator) Theft Deterrent Faceplate TEL Mute Tuner features ...9 Tuning Mode Tuning Monaural Reception Station Preset Memory Auto Memory Entry... -
Page 3: Safety Precautions
• If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer. • Make sure not to get your fingers caught between the faceplate and the unit. - Page 4 Safety precautions NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer.
-
Page 5: About Cds
About CDs Handling CDs • Don’t touch the recording surface of the CD. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. •... -
Page 6: General Features
General features Release button ATT/ LOUD LOUD indicator ATT indicator Clock indicator SYSTEM Q indicator Power Turning ON the Power ¢ Press the [SRC] button. Turning OFF the Power Press the [SRC] button for at least 1 second. Selecting the Source Press the [SRC] button. -
Page 7: Loudness
Loudness Compensating for low and high tones during low volume. Press the [LOUD] button for at least 1 second. Each time the button is pressed for at least 1 second the Loudness turns ON or OFF. When it’s ON, "LOUD" indicator is ON. System Q You can recall the best sound setting preset for different types of the music. -
Page 8: Speaker Setting
General features Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. Enter Standby Press the [SRC] button. Select the "OFF" display. Enter Speaker Setting mode Press the [Q] button. Select the Speaker type Press the [4] or [¢] button. -
Page 9: Tel Mute
its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate Align the projections on the unit with the grooves on the faceplate. -
Page 10: Tuning Mode
Tuner features Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. indicator Preset station "AUTO 2"... -
Page 11: Cd Player Features
Select the band Press the [FM] or [AM] button. Call up the station Press the [#1] — [#6] button. CD player features SCAN Track time IN indicator — 11 — ¢ Track number SCN indicator REP indicator RDM indicator... -
Page 12: Playing Cd
CD player features Playing CD When a CD is inserted Press the [SRC] button. Select the "CD" display. When a CD is inserted, the "IN" indicator is ON. Eject the CD Press the [0] button. 3 in. (8cm) CD cannot be played. Using an adapter and inserting them into this unit can cause damage. -
Page 13: Accessories
2CAUTION Number of items • If your car is not prepared for this special connection-system, consult your Kenwood dealer. • Only use antenna conversion adapters (ISO-JASO) when the antenna cord has an ISO plug. • Make sure that all wire connections are securely made by inserting jacks until they lock completely. -
Page 14: Connecting Wires To Terminals
Connect to the terminal that is grounded when either the TEL MUTE telephone rings or during conversation. To connect the KENWOOD navigation system, consult your navigation manual. Connect either to the power control terminal when using P.CONT the optional power amplifier, ANT.CONT... -
Page 15: Installation
2WARNING Connecting the ISO Connector (see p.14) The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit. The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2 or 3, make the connection as illustrated. - Page 16 Installation ■ Removing the hard rubber frame Engage the catch pins on the removal tool and remove the two locks on the lower level. Lower the frame and pull it forward as shown in the figure. Lock Accessory2 Removal tool When the lower level is removed, remove the upper two locations.
-
Page 17: Troubleshooting Guide
Troubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. General The power does not turn ON.01 ✔... - Page 18 Troubleshooting Guide Disc source The specified disc does not play, but another one plays ✔ The specified CD is quite dirty. ☞ Clean the CD. ✔ The CD is upside-down.53 ☞ Load the CD with the labeled side up. ✔ The disc is severely scratched.55 ☞...
-
Page 19: Specifications
Specifications Specifications subject to change without notice. FM tuner section Frequency range (50 kHz space) ...87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB) ...0.7 µV/75 Ω Quieting Sensitivity (S/N = 46dB) ...1.6 µV/75 Ω Frequency response (±3 dB) ...30 Hz – 15 kHz Signal to Noise ratio (MONO) ...65 dB Selectivity (DIN) (±400 kHz)...≥...