Restoring the Libraries—RESTORE
If you unplug the unit or if a power failure occurs while
recording, compressing (Smart Compression), or editing
the data into the HDD, the Library information stored in
the HDD and what has been actually recorded in the
libraries may happen to become unmatched. As a result,
you cannot skip tracks or albums as you expect to do in the
libraries. If this happens, you can use this function and
restore the libraries.
• NOTICE if you use the RESTORE function, the
following may possibly occur even though the HDD is
restored.
– Library names you have assigned may be reset to the
original names.
– All albums in the HDD may be renumbered newly and
be relocated in libraries.
On the remote control ONLY:
1
Press TITLE/EDIT repeatedly until "LIB. EDIT?"
appears in the main display, then press SET.
• The source changes to "HDD" automatically if
another source has been selected.
2
Press SELECT ¢ or SELECT 4 to select
"RESTORE?"
• Each time you press SELECT ¢ or SELECT 4,
"RESTORE?" or "LIB.NAME?" is alternately
selected.
3
Press SET.
4
Press ENTER.
"HDD WRITING" appears and the HDD lamp flashes
in red while the unit is restoring the libraries.
• If you have performed the above procedure during
play, HDD playback stops.
Copying an Album—COPY ALBUM
You can make a duplication of an album. A new album
number is automatically assigned to a newly duplicated
album.
On the remote control ONLY:
If the HDD includes many albums, select the album
number using Search Mode (see page 34) before
performing the procedure below.
1
Press TITLE/EDIT repeatedly until "ALBUM EDIT?"
appears in the main display.
• The source changes to "HDD" automatically if
another source has been selected.
• Each time you press the button, Title/Edit Modes
change as follows:
TITLE?
Canceled
2
Press SET.
3
Press SET again.
The currently selected album number flashes.
4
Press ALBUM + or ALBUM – to select the album you
want to copy, then press SET.
The library selection screen appears.
Ex. When selecting Album 9
– 54 –
Continued
LIB. EDIT?
ALBUM EDIT?
(Library edit)
TRACK EDIT?
The currently selected
library flashes.