hit counter script
Sony DVP-NC600 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Player
  5. DVP-NC600 - Cd/dvd Player
  6. Service manual
Sony DVP-NC600 Service Manual

Sony DVP-NC600 Service Manual

Cd/dvd player
Hide thumbs Also See for DVP-NC600:
Table of Contents

Advertisement

Quick Links

See also: Training Manual
SERVICE MANUAL
System
Laser
Semiconductor laser
Signal format system
NTSC
PAL (AEP, UK)
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2Hz to 22kHz (±0.5dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio)
115 dB (LINE OUT L/R (AUDIO) 1/2 jacks only)
Harmonic distortion
0.003%
Dynamic range
DVD: 103 dB
CD: 99 dB
Wow and flutter
Less than detected value (±0.001% W PEAK)
The signals from LINE OUT L/R (AUDIO) 1/2 jacks are measured. When you play PCM sound tracks with a 96 kHz
sampling frequency, the output signals from the DIGITAL OUT (COAXIAL and OPTICAL)
48 kHz sampling frequency.
Outputs
Jack name
Jack type
DIGITAL OUT
Optical output jack
(OPTICAL)
DIGITAL OUT
Phono jack
(COAXIAL)
LINE OUT L/R
Phono jack
(AUDIO) 1/2
LINE OUT (VIDEO)
Phono jack
S VIDEO OUT
4-pin mini DIN
COMPONENT VIDEO
Phono jack
OUT (Y, P
, P
)
B
R
(US, CND, PX)

SPECIFICATIONS

jacks
are converted to
Maximum output
Load impedance
level
-18 dBm
Wave length 66 nm
0.5 Vp-p
75 ohms terminated
2 Vrms (50 kilohms)
Over 10 kilohms
1.0 Vp-p
75 ohms, sync negative
Luminance signal:
75 ohms, sync negative
1.0 Vp-p
75 ohms terminated
Color signal:
0.286 Vp-p (NTSC)
0.3 Vp-p (PAL)
Y: 1.0 Vp-p
75 ohms, sync negative
P
, P
0.7 Vp-p
75 ohms terminated
B
R
:
DVP-NC600
RMT-D130A/D130O/D130P
General
Power requirements
120V AC, 60 Hz (US, CND)
110 to 240V AC, 50/60 Hz (PX)
220 to 240V AC, 50/60 Hz (AEP, UK, AUS)
Power consumption
13 W
15 W
430 × 108 × 411 mm (17 × 4
Dimensions (approx.)
incl. projecting parts
Mass (approx.)
5.4 kg (11 lb 14 oz)
5 ° C to 35 ° C (41 ° F to 35 ° F)
Operating temperature
Operating humidity
25% to 80%
Supplied accessories
Check that you have the following items:
• Audio/video cord (pinplug × 3 y pinplug × 3) (1)
• Remote commander (remote) RMT-D130A (1) (US, CND, PX)
RMT-D130O (1) (AUS)
RMT-D130P (1) (AEP, UK)
• Size AA (R6) batteries (2)
• A plug adaptor is included with some models.
Specifications and design are subject to change without notice.
E
NERGY
S
TAR
is a U.S. registered mark. As an
R
has determined that this product meets the
E
NERGY
• Abbreviation
AUS : Australian
CND : Canadian
US Model
Canadian Model
AEP Model
UK Model
Australian Model
PX Model
× 16
3
1
/
/
in.) (width/height/depth)
8
4
E
NERGY
S
TAR
Partner, Sony Corporation
R
S
TAR
guidelines for energy efficiency.
R
CD/DVD PLAYER

Advertisement

Table of Contents
loading

Related Manuals for Sony DVP-NC600

Summary of Contents for Sony DVP-NC600

  • Page 1: Specifications

    DIGITAL OUT Optical output jack -18 dBm Wave length 66 nm NERGY is a U.S. registered mark. As an NERGY Partner, Sony Corporation (OPTICAL) has determined that this product meets the NERGY guidelines for energy efficiency. DIGITAL OUT Phono jack 0.5 Vp-p...
  • Page 2 OPERATION. REPLACE THESE COMPONENTS WITH DE FONCTIONNEMENT. NE REMPLACER CES COM- SONY PARTS WHOSE PART NUMBERS APPEAR AS POSANTS QUE PAR DES PIÈCES SONY DONT LES SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- NUMÉROS SONT DONNÉS DANS CE MANUEL OU LISHED BY SONY.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS Section Title Page Section Title Page Service Note ................4 FL-119, FR-178, SW-353 Printed Wiring Boards ..4-43 FL-119 (FUNCTION SWITCH), GENERAL FR-178 (FUNCTION SWITCH), SW-353 (FUNCTION SWITCH) Schematic Diagram ... 4-45 CN-142, LM-63 Printed Wiring Board ......4-47 Index to Parts and Controls ..........

  • Page 4: Service Note

    SERVICE NOTE 1. DISASSEMBLY • This set can be disassembled in the order shown below. Upper case, Reinforcement (C) (Page 2-1) Front panel section Rear panel section (Page 2-1) (Page 2-1) Table ass’y MB-98 board AV-57 board (Page 2-2) (Page 2-1) (Page 2-2) Chassis ass’y ER-16 board...
  • Page 5 2. NOTE ON REMOVE THE UPPER CASE 4. NOTE ON MOUNTING GEARS 1) Remove seven tapping screws. (See Fig. 1) 1) Mount the gear (U/D). (See Fig. 3.) 2) Open the side of case. (See Fig. 1) 2) Rotate the gear (U/D) in the direction of arrow. 3) Remove the upper case as lift in the direction of arrow.
  • Page 6 Spring (lock lever) Stand (with CK-106 Board) Lock lever CK-105 board Eight flexible flat cables FFC 5P (EXCEPT DVP-NC600), FFC 9P, FFC 15P, FFC26 P, FFC 9P (DVP-NS500P/NS700P), FFC 15P (DVP-NS400D), FFC 25P (EXCEPT DVP-NS300 J model/NC600), Fig. 5 FFC 29P (DVP-NS300 J model)
  • Page 7 5) Set the CK-105 board as shown in Fig. 8. 7) Set the rear panel as shown in Fig. 10. 4 Claw 1 Flexible flat cable 3 Connector (FMD-025: CN103) (CN204) 6 Rear panel 1 Flexible flat cable (FMM-036: CN101) 1 Flexible flat cable (FCM-014: CN108) 1 Flexible flat cable...
  • Page 8 6. CONNECTION OF SERVICE JIG AV-57 CN201 FFC25P CK-105 CN801 FFC 26P FFC 26P (Used the set) CN101 CN102 CN201 FFC 9P FFC 9P (Used the set) Mechanism deck MB-98 CN103 CN104 CN202 FFC 11P CN108 CN107 CN402 FFC 11P (Used the set) CN101 B to B Connector 15P...

  • Page 9: Index To Parts And Controls

    DVP-NC600 SECTION 1 This section is extracted from instruction GENERAL manual (3-067-827-11). Note Region code About this Manual Notes about the Discs Some CD-Rs or CD-RWs cannot be played on this Your player has a region code printed on the...
  • Page 10 A Z OPEN/CLOSE button (32) Rear Panel Remote B Number and ENTER buttons C CLEAR button (40) D ANGLE button (52) E AUDIO button (49) F PROGRAM button (39) G SHUFFLE button (41) COAXIAL OPTICAL R – AUDIO – L VIDEO H DISC SKIP button (32) I TIME/TEXT button (46)

  • Page 11: Getting Started

    Getting Started Quick Overview Step 3: TV Hookups A quick overview presented in this chapter will give you enough information to start using the Connect the supplied audio/video cord and power cord in the order (1~3) shown below. Be player for your enjoyment. To use the surround sound features of this player, refer to “Hookups” sure to connect the power cord last.
  • Page 12 If you are connecting to a video input jack Step 2: Connecting the Audio Cords Connect the yellow plugs of the audio/video cord (supplied) to the yellow (video) jacks. You will enjoy standard quality images. Refer to the chart below to select the connection that best suits your system. The surround effects you will enjoy depend on the connections and components you use.
  • Page 13 CD/DVD player Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and 3 to 6 speakers COAXIAL OPTICAL R – AUDIO – L VIDEO This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your PCM/DTS/ DOLBY DIGITAL S VIDEO...
  • Page 14 CD/DVD player Step 3: Connecting the Power Cord COAXIAL OPTICAL R – AUDIO – L VIDEO Plug the player and TV power cords into an AC outlet. PCM/DTS/ DOLBY DIGITAL S VIDEO DIGITAL OUT LINE OUT COMPONENT VIDEO OUT Do not connect the power cord of your player to the “switched” power socket of an amplifier (receiver).

  • Page 15: Playing Discs

    Playing Discs M Press ENTER. Playing Discs Press A on the player, and place a Quick Setup is finished. All connections and setup operations are complete. disc on the disc tray. Note The player automatically turns on and the You can directly start Quick Setup only when you run it for the first time. power indicator lights up in green.
  • Page 16 Notes Resuming Playback from Using the DVD’s Menu Replace the discs in the compartments • Depending on where you stopped the disc, the player with new ones. the Point Where You may not resume playback from exactly the same point. Stopped the Disc Press EXCHANGE.
  • Page 17 Creating your own program (Program Press X/x to select “SETt” and press Select the title, chapter, or track you To program other discs, titles, chapters, Play) ENTER. want to program. or tracks, repeat Steps 4 to 6. The display for programming appears. The programmed discs, titles, chapters, You can play the contents of the discs in the xWhen playing a DVD...

  • Page 18: Searching For A Scene

    Searching for a Scene Opposite direction Notes Repeating a specific portion (A-B Searching for a Particular x2b (DVD only) t 1 Repeat Play) • You can set A-B Repeat Play for only one specific Point on a Disc section. (Scan, Slow- You can play a specific portion of a title, •...

  • Page 19: Sound Adjustments

    The playing time and remaining time of the current If the DVD/CD text does not fit on a single line, Checking the Playing chapter, title, track, scene, or disc will also appear on you can see the entire text by watching it scroll across Press TIME/TEXT repeatedly to your TV screen.

  • Page 20: Enjoying Movies

    Enjoying Movies To reset the TVS setting TVS (TV Virtual Surround) STANDARD Changing the Angles Displaying the Subtitles In Step 2, select “OFF.” Uses sound imaging to create virtual rear speakers from the sound of the front speakers TVS (TV Virtual Surround) DYNAMIC (L, R) without using actual rear speakers.
  • Page 21 Playing the disc for which Custom Limiting playback by children Press X/x to select “PARENTAL Enter or re-enter your 4-digit password Parental Control is set (Parental Control) CONTROL t,” then press ENTER. using the number buttons, then press ENTER. Playback of some DVDs can be limited xIf you have not entered a password “Custom parental control is set.”...

  • Page 22: Settings And Adjustments

    By adjusting the remote signal, you can The default setting of the Sound Feedback Sony (default) Panasonic 06, 19 control your TV or AV amplifier (receiver) function is set to off. with the supplied remote.
  • Page 23 If you select “OTHERS t” in “DVD MENU,” Select a setting using X/x, then press Setting the Display or Settings for the Display “SUBTITLE,” and “AUDIO,” select and enter the language code from the list using the number buttons ENTER. Sound Track Language (page 76).

  • Page 24: Additional Information

    , The player cannot play CD-ROMs, etc. (page operating manual that comes with the disc. any problem persist, consult your nearest Sound Sony dealer. , The region code on the DVD does not match There is no sound. the player.

  • Page 25: Language Code List

    Parental Control functions are provided with Dolby Surround (Pro Logic) (page 67) number , Contact your Sony dealer or local authorized the DVD. Audio signal processing technology that C 13 The disc is dirty. Sony service facility.

  • Page 26: List Of Setup Display Items

    CUSTOM SETUP (page 65) List of Setup Display Items AUTO PLAY TIMER DEMO1 The default settings are underlined. DEMO2 LANGUAGE SETUP (page 63) DIMMER BRIGHT DARK ENGLISH FRENCH SPANISH PAUSE MODE AUTO PORTUGUESE FRAME PARENTAL CONTROL , DVD MENU ENGLISH FRENCH TRACK SELECTION SPANISH...

  • Page 27: Disassembly

    DVP-NC600 SECTION 2 DISASSEMBLY Note: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE, REINFORCEMENT (C) 2-3. REAR PANEL REMOVAL REMOVAL 8 Rear panel 4 Upper case 3 Screw (B3) 1 Two tapping screws 3 Three tapping...

  • Page 28: Board Removal (Aep, Uk)

    2-5. AV-57 BOARD REMOVAL 2-7. TABLE ASS’Y REMOVAL 5 Two brackets 8 Table ass’y (guide B1) (silver) 3 AV-57 board 2 Bracket 2 Six screws (guide B1) (black) (B3) 3 Bracket (guide B1) (silver) 4 Two screws (B3) 1 Flexible flat cable (FAE-006: CN101) (AEP, UK) 7 Flexible flat cable...

  • Page 29: Cn-142 Board Removal

    2-9. CN-142 BOARD REMOVAL 2-11. BU HOLDER ASS’Y REMOVAL 2 Two screws 1 Two screws (B3) (B3) 3 Bracket (CP) 3 CN-142 board 4 Screw 5 BU holder ass’y (M3 × 12) 1 Connector (CN304) 2 Claw 2-10. LOADING MOTOR ASS’Y (M851) 2-12.

  • Page 30: Power Block Removal

    2-13. POWER BLOCK REMOVAL 7 PWB cover 2 Power striker 5 Claw 8 Power block 1 Connector 6 Claw (CN101) 3 Two screws (3 x 8)

  • Page 31: Internal Views

    2-14. INTERNAL VIEWS PH501 Disc presence detection sensor 8-749-924-30 Optical pick-up (KHM-240 AAA/J1RP) 8-820-144-06 M951 PH502 DC motor (turn table) Roulette position 1-541-632-11 detection sensor 8-749-924-18 Rotary encoder (loading) 1-466-996-21 M851 Loading motor ass’y A-4660-977-A...

  • Page 32: Circuit Boards Location

    2-15. CIRCUIT BOARDS LOCATION TM-125 POWER BLOCK (TURNTABLE MOTOR) (MPN4801) (US, Canadian) AV-57 (MPN4901) (AEP, UK, Australian, PX) SE-122 (AUDIO/VIDEO OUT) (SWITCHING REGULATOR) (SENSOR) ER-16 IF-81 (AEP, UK) (INTERFACE CONTROL) (EURO AV) LM-63 (LOADING MOTOR) MB-98 FR-178 (SIGNAL PROCESS, SERVO) (FUNCTION SWITCH) CN-142 SW-353...

  • Page 33: Block Diagrams

    DVP-NC600 SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM AV-57 BOARD MB-98 BOARD (SEE PAGE 4-31 to 4-34) (SEE PAGE 4-11 to 4-26) IC504, 505* *IC505 : AEP, UK EXCEPT AEP, UK 16M SDRAM J102 Y, Cb, Cr COMPONENT VIDEO OUT...

  • Page 34: Rf/Servo Block Diagram

    DVP-NC600 3-2. RF/SERVO BLOCK DIAGRAM MB-98 BOARD (1/4) IC202 tl (DVD play) IC202 tl (CD play) IC202 rs (DVD play) IC202 rs (CD play) (SEE PAGE 4-11, 13, 19) 500 mV/DIV 50 ns/DIV 500 mV/DIV 200 ns/DIV BASE UNIT 100 mV/DIV 50 ms/DIV...

  • Page 35: Signal Processor Block Diagram

    DVP-NC600 3-3. SIGNAL PROCESSOR BLOCK DIAGRAM MB-98 BOARD (2/4) (SEE PAGE 4-13 to 4-18) IC504, 505* *IC505 : AEP, UK 16M SDRAM IC303 16M DRAM IC302 <zcz (DVD play) 500 mV/DIV 100 ns/DIV IC503 yl IC503 yl : AEP, UK...

  • Page 36: System Control Block Diagram

    DVP-NC600 3-4. SYSTEM CONTROL BLOCK DIAGRAM MB-98 BOARD (3/4) (SEE PAGE 4-21 to 4-24) IC107 IC108 FLASH HA 0 – 21 HA 0 – 21 HD 0 – 15 HD 0 – 15 IC103 tf 1 – 5 102 – 109 111 – 118 120 85 – 100 HA 0 –...

  • Page 37: Video Block Diagram

    DVP-NC600 3-5. VIDEO BLOCK DIAGRAM IC102 wa : AEP, UK AV-57 BOARD (1/2) * IC102 36 pin : EXCEPT AEP, UK ed : EXCEPT AEP, UK J101 (1/2) (SEE PAGE 4-31) 24 pin : AEP, UK EXCEPT AEP, UK IC102...

  • Page 38: Audio Block Diagram

    DVP-NC600 3-6. AUDIO BLOCK DIAGRAM AV-57 BOARD (2/2) (SEE PAGE 4-33) MB-98 BOARD (4/4) IC201 (SEE PAGE 4-25) OPTICAL DIGITAL OUT 1 D IN OPTICAL DIGITAL CN801 (3/3) CN201 (2/2) J201 SPDIF Q201 SPDIF BUFFER COAXIAL IC801 AUDIO DSP IC802...

  • Page 39: Interface Control Block Diagram

    DVP-NC600 3-7. INTERFACE CONTROL BLOCK DIAGRAM IF-81 BOARD FR-178 BOARD (SEE PAGE 4-41) (SEE PAGE 4-45) IC404 IC702 IF CON REMOTE COMMANDER RECEIVER CN401 CN403 CN701 AUDIO SIRCS A MUTE (SEE PAGE 3-12) /AMUTE VIDEO /VMUTE VMUTE LED DATA (SEE PAGE 3-9)

  • Page 40: Power 1 Block Diagram

    DVP-NC600 3-8. POWER 1 BLOCK DIAGRAM US, Canadian MPN4801 BOARD (SEE PAGE 4-57) CN101 D101 Q101 – 103 SW+11V • POWER +11V REG Q201 VR101 AC IN D11 – 14 SW+5V Q104 • +11V ADJ L1, 2 SW+5V LINE FILTER...

  • Page 41: Power 2 Block Diagram

    DVP-NC600 3-9. POWER 2 BLOCK DIAGRAM AEP, UK FR-178 BOARD ER-16 BOARD (SEE PAGE 4-45) AV-57 BOARD (SEE PAGE 4-37) (SEE PAGE 4-31 to 4-34) D702 CN204 CN101 CN901 L905 IC901 D703 SW+5V • VIDEO –5V BUFFER, +11V SELECT +11V...

  • Page 42: Printed Wiring Boards And Schematic Diagrams

    DVP-NC600 DVP-NC600 SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR PRINTED WIRING For schematic diagram: • Caution when replacing chip parts. BOARDS AND SCHEMATIC DIAGRAMS. New parts must be attached after removal of chip. (In addition to this, the necessary mote is printed Be careful not to heat the minus side of tantalum capacitor, in each block.)

  • Page 43: Frame Schematic Diagram

    DVP-NC600 4-1. FRAME SCHEMATIC DIAGRAM FRAME 1 SCHEMATIC DIAGRAM FFC FAE-006 POWER BLOCK CN201 CN204 P-DET P-DET AV-57 BOARD (1/2) P-CONT P-CONT SW+11V SW+11V SW+11V SW+11V CN101 SW+5V SW+5V AC_IN N SW+5V SW+5V AC_IN L EVER+5V EVER+5V ER-16 BOARD SW+3.3V SW+3.3V...
  • Page 44 DVP-NC600 FRAME 2 SCHEMATIC DIAGRAM FL-119 BOARD CN603 N.C. AV-57 BOARD (2/2) FR-178 BOARD PUSH N.C. ENTER EVER+5V CURSOR STICK HARNESS AI-058 FIF-001 FIR-001 IF-81 BOARD SW-353 BOARD HARNESS CN-142 BOARD CN305 CAI-001 DOWNLOAD (JIG) CN-142 BOARD HARNESS CN303 CAI-001...

  • Page 45: Printed Wiring Boards And Schematic Diagrams

    DVP-NC600 There are a few cases that the part isn't mounted in this model is printed on this diagram. 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS MB-98 (SIGNAL PROCESS, SERVO) PRINTED WIRING BOARD – Ref. No.: MB-98 board; 2,000 series –...
  • Page 46 DVP-NC600 MB-98 BOARD (SIDE B) IC101 IC102 IC107 IC202 IC301 IC303 IC401 IC501 IC502 IC504 IC505 IC601 IC801 IC802 Q201 Q202 SIGNAL PROCESS, SERVO MB-98 4-10...

  • Page 47: Mb-98 (Rf Amp, Servo) Schematic Diagram

    DVP-NC600 MB-98 (RF AMP, SERVO) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: MB-98 board; 2,000 series – line with mark 0 are critical for safety.

  • Page 48: Arp, Servo Dsp) Schematic Diagram

    DVP-NC600 MB-98 (ARP, SERVO DSP) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-98 board; 2,000 series – MB-98 BOARD (2/8) SDI7 NO MARK:DVD/CD PLAY SDI7 SDI6 D:DVD PLAY MB-98 SDI6 MB-98 BOARD SDI5 C:CD PLAY...

  • Page 49: Mb-98 (Av Decoder) Schematic Diagram

    DVP-NC600 MB-98 (AV DECODER) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-98 board; 2,000 series – MB-98 BOARD (3/8) MB-98 BOARD MB-98 BOARD (6/8) (7/8) NO MARK:DVD/CD PLAY *:IMPOSSIBLE TO MEASURE THE D:DVD PLAY VOLTAGE AT THE MARKED POINTS.

  • Page 50: Bnr) Schematic Diagram

    DVP-NC600 • Waveforms MB-98 (BNR) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-98 board; 2,000 series – 1 IC503 yd : AEP, UK 3 IC503 yl : EXCEPT AEP, UK (LINE : RGB mode)

  • Page 51: Drive) Schematic Diagram

    DVP-NC600 MB-98 (DRIVE) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-98 board; 2,000 series – MB-98 BOARD (5/8) SIGNAL PATH NO MARK:DVD/CD PLAY SPINDLE SERVO(SPEED AND PHASE) D:DVD PLAY C:CD PLAY TRACKING SERVO DVD/CD CDV SLED SERVO DVD/CD +3.3V...

  • Page 52: System Control) Schematic Diagram

    DVP-NC600 MB-98 (SYSTEM CONTROL) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-98 board; 2,000 series – NO MARK:DVD/CD PLAY MB-98 BOARD (6/8) D:DVD PLAY C:CD PLAY P:PAL DVD PLAY N:NTSC DVD PLAY +3.3V MB-98 BOARD (7/8)

  • Page 53: Clock Generator

    DVP-NC600 MB-98 (CLOCK GENERATOR) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-98 board; 2,000 series – MB-98 BOARD (7/8) IC102 FSEL MB-98 BOARD (6/8) NO MARK:DVD/CD PLAY D:DVD PLAY *IC102 C:CD PLAY IMIC6001BTD :AEP,UK...

  • Page 54: Audio Dsp, D/A Converter) Schematic Diagram

    DVP-NC600 MB-98 (AUDIO DSP, D/A CONVERTER) SCHEMATIC DIAGRAM • See page 4-7 for printed wiring board. – Ref. No.: MB-98 board; 2,000 series – MB-98 BOARD (8/8) NO MARK:DVD/CD PLAY D:DVD PLAY C:CD PLAY SPDIF MB-98 BOARD (3/8) SIGNAL PATH...
  • Page 55 DVP-NS300 • Waveforms 1 IC102 wa : AEP, UK 4 IC102 wf : EXCEPT AEP, UK AV-57 BOARD IC102 ed : EXCEPT AEP, UK CN101 CN201 CN202 CN203 CN204 D101 D102 D201 D202 D203 IC101 IC102 2.0 Vp-p (H) IC201 IC202 2.4 Vp-p (H) IC203...

  • Page 56: Printed Wiring Board

    DVP-NC600 There are a few cases that the part isn't mounted in this model is printed on this diagram. AV-57 (AUDIO/VIDEO OUT) PRINTED WIRING BOARD – Ref. No.: AV-57 board; 1,000 series – AUDIO/VIDEO OUT AV-57 4-29 4-30...

  • Page 57: Video Buffer) Schematic Diagram

    DVP-NC600 AV-57 (VIDEO BUFFER) SCHEMATIC DIAGRAM • See page 4-29 for printed wiring board, and see page 4-28 for waveforms. – Ref. No.: AV-57 board; 1,000 series – AV-57 BOARD (1/2) NO MARK:DVD/CD PLAY AV-57 BOARD (2/2) L101 VMUTE 100uH...

  • Page 58: Av-57 (Audio Amp) Schematic Diagram

    DVP-NC600 AV-57 (AUDIO AMP) SCHEMATIC DIAGRAM • See page 4-29 for printed wiring board. – Ref. No.: AV-57 board; 1,000 series – SIGNAL PATH AV-57 BOARD (2/2) VIDEO SIGNAL R213 R220 4700 2200 AUDIO C216 NO MARK:DVD/CD PLAY 0.01u C220...
  • Page 59 DVP-NC600 ER-16 (EURO AV) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: ER-16 board; 1,000 series – – AEP, UK – • Waveforms 4 IC901 wg (LINE : S VIDEO mode) 1 IC901 ef (LINE : RGB mode) 2.0 Vp-p (H)
  • Page 60 DVP-NC600 ER-16 (EURO AV) SCHEMATIC DIAGRAM – Ref. No.: ER-16 board; 1,000 series – – AEP, UK – ER-16 BOARD SIGNAL PATH NO MARK:DVD/CD PLAY VIDEO SIGNAL AUDIO SIGNAL CHROMA Y/CHROMA CN901 L905 JL933 IC901 100uH JL934 C913 VIDEO BUFFER, 0.22u...
  • Page 61 DVP-NC600 IF-81 (INTERFACE CONTROL) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: IF-81 board; 1,000 series – IF-81 BOARD TM-125 CN401 POWER BLOCK CN402...

  • Page 62: If-81 Board

    DVP-NC600 IF-81 (IF CON) SCHEMATIC DIAGRAM – Ref. No.: IF-81 board; 1,000 series – IF-81 BOARD NO MARK:DVD/CD PLAY CN401 JL401 -11V R433 -11V JL403 P-DET JL404 P-CONT JL405 AV-57 BOARD (2/2) EVER+5V -27.9 JL406 C402 CN203 0.01u JL407 (SEE PAGE 4-34)
  • Page 63 DVP-NC600 FL-119 (FUNCTION SWITCH), FR-178 (FUNCTION SWITCH), SW-353 (FUNCTION SWITCH) PRINTED WIRING BOARDS There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: FL-119 board, FR-178 board and SW-353 board; 3,000 series –...

  • Page 64: Function Switch), Fr-178 (Function Switch), Sw-353 (Function Switch) Schematic Diagram

    DVP-NC600 FL-119 (FUNCTION SWITCH), FR-178 (FUNCTION SWITCH), SW-353 (FUNCTION SWITCH) SCHEMATIC DIAGRAM – Ref. No.: FL-119 board, FR-178 board and SW-353 board; 3,000 series – FL-119 BOARD R603 R601 R602 CN601 8200 3900 2700 R604 8200 JL602 JL601 EVER+5V IF-81 BOARD...
  • Page 65 DVP-NC600 CN-142 (CONNECTION), LM-63 (LOADING MOTOR) PRINTED WIRING BOARDS There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: CN-142 board, LM-63 board; 1,000 series – CN-142 BOARD CN301...

  • Page 66: Connection), Lm-63 (Loading Motor) Schematic Diagram

    DVP-NC600 CN-142 (CONNECTION), LM-63 (LOADING MOTOR) SCHEMATIC DIAGRAM – Ref. No.: CN-142 board, LM-63 board; 1,000 series – CN-142 BOARD NO MARK:DVD/CD PLAY CN302 CN303 JL301 JL324 JL302 JL325 JL303 JL326 JL304 JL327 IF-81 BOARD JL305 JL328 CN404 XIFCS XIFCS...
  • Page 67 DVP-NC600 SE-122 (SENSOR), TM-125 (TURNTABLE MOTOR) PRINTED WIRING BOARDS There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: SE-122 board, TM-125 board; 1,000 series – TM-125 POWER BLOCK...

  • Page 68: Sensor), Tm-125 (Turntable Motor) Schematic Diagram

    DVP-NC600 SE-122 (SENSOR), TM-125 (TURNTABLE MOTOR) SCHEMATIC DIAGRAM – Ref. No.: SE-122 board, TM-125 board; 1,000 series – SE-122 BOARD TM-125 BOARD NO MARK:DVD/CD PLAY CN502 CN951 CN503 JL951 JL501 JL507 M951 JL502 JL508 JL952 TURN TABLE MOTOR JL503 Q501...

  • Page 69: Switching Regulator

    DVP-NC600 MPN4801 (SWITCHING REGULATOR) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: MPN4801 board; 4,000 series – – US, CND – MPN4801 BOARD MPN4801BOARD...
  • Page 70 DVP-NC600 MPN4801 (SWITCHING REGULATOR) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: MPN4801 board; 4,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.
  • Page 71 DVP-NC600 MPN4901 (SWITCHING REGULATOR) PRINTED WIRING BOARD There are a few cases that the part isn't mounted in this model is printed on this diagram. – Ref. No.: MPN4901 board; 5,000 series – – AEP, UK, AUS, PX – MPN4901 BOARD...
  • Page 72 DVP-NC600 MPN4901 (SWITCHING REGULATOR) SCHEMATIC DIAGRAM The components identified by mark 0 or dotted Les composants identifiés par une marque 0 sont – Ref. No.: MPN4901 board; 5,000 series – line with mark 0 are critical for safety. critiques pour la sécurité. Ne les remplacer que Replace only with part number specified.

  • Page 73: Ic Pin Function Description

    DVP-NC600 SECTION 5 IC PIN FUNCTION DESCRIPTION...
  • Page 74 5-2 E...

  • Page 75: Test Mode

    DVP-NC600 SECTION 6 TEST MODE 6-1. GENERAL DESCRIPTION 6-3. SYSCON DIAGNOSIS The Test Mode allows you to make diagnosis and adjustment eas- The same contents as board detail check by serial interface can be ily using the remote commander and monitor TV. The instructions, checked from the remote commander.
  • Page 76 Submenu (2-4) Model Type Model code is displayed. Selecting 2 and subsequent items calls the submenu screen of each Error: Not detected. item. The model code read from the EEPROM is displayed with For example, if “5. Supply” is selected, the following submenu 2-digit hexadecimal number.
  • Page 77 4. Servo address, and read address are displayed in this order. How- ever, the message uses same template, and accordingly ex- (4-2) Servo DSP Check Data write → read, and accord check change Address and Data when reading. The following dis- play, for example, Error 12: Read data discord 0x9249, 0x2942 and 0x4294 are written to the RAM ad-...
  • Page 78 7. Video Check Items List (7-2) Color Bar AVD color bar command write → Video OUT 2) Version Error: Not detected. (2-2) Revision The command is transferred to the AVD, and the color bar (2-3) ROM Check Sum signals are output from video terminals. (2-4) Model Type They are output from all video terminals (Composite, Y/C, (2-5) Region...

  • Page 79: Drive Auto Adjustment

    6-4. DRIVE AUTO ADJUSTMENT 1. DVD-SL (single layer) Select , place DVD single layer disc on the turntable number 1 [ENTER] and press key, and the adjustment will be made through On the Test Mode Menu screen, press key on the remote com- the following steps, then adjusted values will be written to the mander, and the drive auto adjustment menu will be displayed.
  • Page 80 2. CD 3. DVD-DL (dual layer) Select , place CD disc on the turntable number 2 and press Select , place DVD dual layer disc on the turntable number 3 [ENTER] [ENTER] key, and the adjustment will be made through the fol- and press key, and the adjustment will be made through lowing steps, then adjusted values will be written to the EEPROM.

  • Page 81: Drive Manual Operation

    6-5. DRIVE MANUAL OPERATION 0. Disc Check Memory Disc Check On the Test Mode Menu screen, select , and the manual opera- tion menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. 1.
  • Page 82 Sled Turn ON/OFF the sled servo. Disc Type 1. Disc Type Auto Check CLVA Turn ON/OFF normal servo of spindle 2. DVD SL 12 cm servo. 3. DVD DL 12 cm 4. CD 12cm FCS. Srch Apply same voltage as that of focus 5.
  • Page 83 4. Manual Adjustment Auto EQ Auto L.F. Offset Adjusts loop filter offset. Manual Adjustment 1. TRK. Offset 2. Focus Gain Auto Group Delay 3. TRK. Gain 4. Focus Offset 5. Focus Balance 6. Memory Check 6. L.F. Offset 7. EQ BOOST EEPROM DATA 1 -–...

  • Page 84: Mecha Aging

    [OPEN/CLOSE] [TITLE] [CLEAR] Opens/closes the disc tray. Press keys in this order. Tray Open/Close Initializing set up data [DVD] [CLEAR] Press keys in this order. [UP] [DOWN] Cursor Stops the turning of turntable. The data have been initialized when “Set Up Initialized” mes- TurnTable Stop sage is displayed.

  • Page 85: Version Information

    6-8. VERSION INFORMATION 6-10. IF CON SELF DIAGNOSTIC FUNCTION 1. IF-81 BOARD (IF CON) TEST MODE ## Version Information ## The front board test mode is the IF CON self diagnostic mode. IF con. Ver : x. xxx (xxxx) The IF CON can diagnose the functions of the front panel boards Group that the IF CON controls.
  • Page 86 2-2. Operation of Auto Self Check When the Self Check mode becomes active at the AC Power ON or by key input, the test display of the following steps (1) to (4) is repeated. (1) FLD and LED all ON (for 5 seconds) ALL DISCS DISC GROUP TITLE TRACK CHAP INDEX ANGLE NTSC HOUR MPEG MULTI...
  • Page 87 2-3. Each Self Check Function Each Self Check function tests the FLD display, LED display, and key input. IC404: Pin No. (Signal) Input Voltage [V] (AD1) (AD2) (AD3) (AD4) (AD5) (AD6) (AD7) Pin ea Pin es Pin ed Pin ef Pin eg Pin eh Pin ej...
  • Page 88 [PLAY] Key code display (at input of key, Key code: 0Ah) ALL DISCS DISC GROUP TITLE TRACK CHAP INDEX ANGLE NTSC HOUR MPEG MULTI SHUFFLE DMIX P.PCM REPEAT ;Digital At input of faulty voltage ALL DISCS DISC GROUP TITLE TRACK CHAP INDEX ANGLE NTSC HOUR MPEG MULTI SHUFFLE DMIX P.PCM...
  • Page 89 2-3-4. Communication Monitoring Display The communication state is monitored and displayed while the key name on the main unit and the remote commander is displayed. When the communication to the System Controller failed, VCD, DVD, and CD segments turn on. Communication error display (at no key input) ALL DISCS DISC GROUP TITLE...
  • Page 90 2-3-6. FLD Grid Test Display and SHUTTLE Click Operation Test 2-3-6-1. Transition Keys in Self Check Mode [UP] • on the main unit and the remote commander • SHUTTLE on the remote commander during Grid Test display (This model does not provide JOG/SHUTTLE, and therefore use another DVD remote commander having the JOG/ SHUTTLE) 2-3-6-2.
  • Page 91 ALL DISCS DISC GROUP TITLE TRACK CHAP INDEX ANGLE NTSC HOUR MPEG MULTI SHUFFLE DMIX P.PCM REPEAT ;Digital ( 1G~12G ) ANODE CONNECTION ALL DISCS MPEG MULTI SHUFFLE DMIX P.PCM REPEAT ; Digital DISC GROUP TITLE TRACK CHAP INDEX ANGLE NTSC HOUR 6-17...

  • Page 92: Troubleshooting

    6-11. TROUBLESHOOTING 1-2. CPUCK (33 MHz) is outputted (communication with ROM is normal) • AVD (IC503) check 6-11-1. Cannot Enter Test Mode Using an oscilloscope, measure the SDCLKO (<zv.> pin) of the You cannot enter the Test mode when either button has been pressed AVD (IC503) to check that 95 MHz is outputted.
  • Page 93 3. At button ON, LED lights in green but returns to red (standby state) after several seconds (e.g. it returns to standby state after “SONY DVD” was displayed) There is no regularity between faulty parts and timing when the set returns to the standby state).

  • Page 94: Electrical Adjustment

    DVP-NC600 SECTION 7 ELECTRICAL ADJUSTMENT 7-1. POWER SUPPLY ADJUSTMENT In making adjustment, refer to 7-3. Adjustment Related Parts Arrangement. 1. Power Supply Check (MPN4801/MPN4901 Boards) Note: During diagnostic check, the characters and color bars can be seen only with the NTSC monitor. Therefore, for diag-...

  • Page 95: Adjustment Of Video System

    7-2. ADJUSTMENT OF VIDEO SYSTEM 3. Checking S Video Output S-C <Purpose> This checks whether the S-C satisfies the NTSC/PAL Standard. If 1. Video Level Adjustment (MB-98 Board) it is not correct, the colors will be too dark or light. <Purpose>...

  • Page 96: Checking Component Video Output B-Y

    5. Checking Component Video Output B-Y 7. Checking RGB Output R (AEP, UK Model) (US, Canadian, Australian, PX Model) <Purpose> <Purpose> This checks RGB output R. If it is incorrect, pictures will not be This checks component video output B-Y. If it is incorrect, cor- displayed correctly in spite of connection to the TV with an EURO rect colors will not be displayed when connected to, for instance, AV connecting cord.

  • Page 97: Checking Rgb Output B

    9. Checking RGB Output B (AEP, UK Model) <Purpose> This checks RGB output B. If it is incorrect, pictures will not be displayed correctly in spite of connection to the TV with an EURO AV connecting cord. In test mode, Push for Syscon Diagnosis and Mode...

  • Page 98: Adjustment Related Parts Arrangement

    7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT MB-98 BOARD (SIDE A) RV501 VIDEO LEVEL IC503 MPN4801/MPN4901 BOARDS (SIDE A) VR401 -11V VR101 VR301 +11V CN101 7-6 E...

  • Page 99: Repair Parts List

    DVP-NC600 SECTION 8 REPAIR PARTS LIST 8-1. EXPLODED VIEWS Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-062-340-01 +BV SUMITITE B3 EXT W (3X8) 3-055-791-01 SUMITITE (B3) (RING), +BV NOTE: 3-067-232-11 BUTTON (POWER) (BLACK) * 13 A-6065-678-A MB-98 BOARD, COMPLETE (US, CND, PX) •...

  • Page 100: Front Panel Assembly

    3-051-076-01 BELT (RM) 3-059-349-11 LEG CUSHION 1-757-752-11 CABLE, FLEXIBLE FLAT (FIF-001) 3-062-119-03 TABLE (ROTARY) * 114 4-957-278-01 BEARING (ROTARY A) 3-943-995-01 EMBLEM (NO.5), SONY (BLACK) * 60 A-6065-673-A FL-119 BOARD, COMPLETE 3-970-608-11 SUMITITE (B3), +BV X-4947-960-1 ROLLER ASSY 7-621-773-93 SCREW +B 2.6X3 A-6062-390-D TABLE (LOADING) ASSY 3-943-995-31 EMBLEM (NO.5), SONY (GREY)

  • Page 101: Chassis Assembly

    8-1-4. CHASSIS ASSEMBLY not supplied M851 not supplied The components identified by Les composants identifiés par une mark 0 or dotted line with marque 0 sont critiques pour la mark 0 are critical for safety. sécurité. Replace only with part num- Ne les remplacer que par une pièce ber specified.

  • Page 102: Electrical Parts List

    C218 1-126-934-11 ELECT 220uF C219 1-126-960-11 ELECT < IC > C220 1-104-664-11 ELECT 47uF IC101 8-759-667-17 IC L79M05TLL-SONY-TL C221 1-104-664-11 ELECT 47uF IC102 8-759-826-45 IC LA73050-TLM (US, CND, AUS, PX) C222 1-126-960-11 ELECT IC102 8-759-826-46 IC LA73051-TLM (AEP, UK) (AEP, UK)
  • Page 103 AV-57 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC202 8-759-711-59 IC NJM78L05UA-TE1 R117 1-216-021-00 METAL CHIP 1/10W IC203 8-759-909-71 IC BA4558F-E2 R118 1-216-021-00 METAL CHIP 1/10W (US, CND, AUS, PX) < JACK > R119 1-216-021-00 METAL CHIP 1/10W (US, CND, AUS, PX) J101...
  • Page 104 AV-57 CN-142 ER-16 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R241 1-216-065-91 RES-CHIP 4.7K 1/10W (AEP, UK) < IC > R242 1-216-097-11 RES-CHIP 100K 1/10W IC301 8-759-832-05 IC BA18BC0FP-E2 R243 1-216-097-11 RES-CHIP 100K 1/10W IC303 8-759-598-69 IC BA6956AN (AEP, UK) R244...
  • Page 105 ER-16 FL-119 FR-178 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > < RESISTOR > IC901 8-759-826-47 IC LA73052-TLM R601 1-216-071-00 METAL CHIP 8.2K 1/10W R602 1-216-063-91 RES-CHIP 3.9K 1/10W < JUMPER RESISTOR > R603 1-216-059-00 METAL CHIP 2.7K...
  • Page 106 FR-178 IF-81 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R714 1-216-047-91 RES-CHIP 1/10W R716 1-216-047-91 RES-CHIP 1/10W < JUMPER RESISTOR > R717 1-216-081-00 METAL CHIP 1/10W R718 1-216-037-00 METAL CHIP 1/10W JR401 1-216-295-11 SHORT JR403 1-216-295-11 SHORT R719 1-216-033-00 METAL CHIP...
  • Page 107 IF-81 LM-63 MB-98 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < SWITCH > C207 1-162-966-11 CERAMIC CHIP 0.0022uF 10% C208 1-162-966-11 CERAMIC CHIP 0.0022uF 10% S401 1-771-349-21 SWITCH, KEYBOARD (x) C209 1-124-779-00 ELECT CHIP 10uF S402 1-771-349-21 SWITCH, KEYBOARD (X) C215...
  • Page 108 MB-98 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C339 1-162-970-11 CERAMIC CHIP 0.01uF C530 1-162-970-11 CERAMIC CHIP 0.01uF C340 1-162-970-11 CERAMIC CHIP 0.01uF C531 1-162-970-11 CERAMIC CHIP 0.01uF C341 1-162-970-11 CERAMIC CHIP 0.01uF C532 1-162-970-11 CERAMIC CHIP 0.01uF C342 1-162-970-11 CERAMIC CHIP...
  • Page 109 MB-98 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FL108 1-234-177-21 FILTER, CHIP EMI R129 1-216-833-11 METAL CHIP 1/16W FL201 1-234-177-21 FILTER, CHIP EMI R130 1-216-833-11 METAL CHIP 1/16W FL501 1-234-177-21 FILTER, CHIP EMI R133 1-216-833-11 METAL CHIP 1/16W FL502 1-234-177-21 FILTER, CHIP EMI...
  • Page 110 MB-98 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R216 1-216-864-91 SHORT R410 1-216-842-11 METAL CHIP 1/16W R219 1-216-864-91 SHORT R411 1-216-842-11 METAL CHIP 1/16W R220 1-216-803-11 METAL CHIP 1/16W R412 1-216-850-11 METAL CHIP 270K 1/16W R223 1-216-803-11 METAL CHIP 1/16W...
  • Page 111 MB-98 POWER BLOCK (MPN4801) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 P302 1-533-592-11 LINK, IC (1.6A/AC60V) R808 1-216-864-91 SHORT < PHOTO COUPLER > < VARIABLE RESISTOR > 0 PC1 9-885-006-57 PHOTO COUPLER PC817 RV501 1-223-583-11 RES, ADJ, CARBON 1K <...
  • Page 112 POWER BLOCK (MPN4801) POWER BLOCK (MPN4901) Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R312 1-247-840-91 CARBON 2.4K 1/4W D401 8-719-210-51 DIODE 21DQ10 R313 1-247-803-91 CARBON 1/4W D402 8-719-063-04 DIODE MTZJ6.8A R314 1-247-809-91 CARBON 1/4W D404 8-719-901-33 DIODE 1SS133 R315 1-247-833-91 CARBON...
  • Page 113 POWER BLOCK (MPN4901) SE-122 SW-353 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-247-871-91 CARBON 1/4W A-6065-676-A SE-122 BOARD, COMPLETE 1-247-871-91 CARBON 1/4W (US, CND, AUS, PX) 1-247-897-91 CARBON 560K 1/4W A-6065-683-A SE-122 BOARD, COMPLETE (AEP, UK) 1-247-897-91 CARBON 560K 1/4W...
  • Page 114 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark MISCELLANEOUS ************** 1-769-744-91 CORD, POWER (AEP, UK, PX) 1-783-531-31 CORD, POWER (US, CND) 1-790-588-11 CORD, POWER (AUS) 1-757-749-11 CABLE, FLEXIBLE FLAT (FAM-008) 1-757-750-11 CABLE, FLEXIBLE FLAT (FCM-014) 1-757-748-11 CABLE, FLEXIBLE FLAT (FAE-006) (AEP, UK) 1-757-753-11 CABLE, FLEXIBLE FLAT (FIR-001) 1-757-752-11 CABLE, FLEXIBLE FLAT (FIF-001) 1-786-131-11 SWITCH, TACTILE...
  • Page 115 DVP-NC600 Sony Corporation 2001D0500-1 9-929-704-11 Home Video Campany © 2001. 4 – 166 – Published by Quality Assurance Dept.

Table of Contents