External Monitor; Hdmi - Toshiba Satellite L350 series User Manual
Notebook
Hide thumbs
Also See for Satellite L350 series:
- Maintenance manual (201 pages) ,
- User manual (172 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
External monitor
An external analog monitor can be connected to the external monitor port
on the computer, Port Replicator. The computer supports VGA and Super
VGA video modes. To connect a monitor, follow the steps below.
If an external monitor is connected to the computer, do not connect the
Port Replicator. First disconnect the external monitor from the computer
then connect the Port Replicator and use its external monitor port.
The hibernation and sleep feature can be used with an external monitor.
Simply enable Resume and the computer will maintain the data as it is
displayed on the external monitor.
1. Connect the monitor to the external monitor port.
2. Turn the monitor's power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
You can use the HW Setup to select between Auto-Selected and
LCD+Analog RGB displays. Refer to Chapter 7,
If you have selected LCD+Analog RGB under the Display options of the HW
Setup, both the external monitor and the internal LCD will be active when
you turn on the computer. If Auto-Selected is selected, only the external
monitor will be active.
To change the display settings, press FN + F5. If you disconnect the
monitor before you turn the computer off, be sure to press FN + F5 to
switch to the internal display. Refer to Chapter 5,
on using hot keys to change the display setting.
If you set LCD+Analog RGB for the computer's display, you must set the
computer's display resolution to the same as that of the external monitor or
other device, such as a projector.
HDMI
Some models are equipped with HDMI out port than can send/receive
video, audio and control signals by connecting with external display/audio
devices. 1080p, 720p, 576p and 480p signal formats are supported, but
actually available signal format depends on each HDMI devices. To
connect external devices, follow the steps as detailed below:
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not been confirmed, some HDMI monitors may not function
properly.
1. Plug one end of the HDMI cable into the HDMI port of the HDMI
User's Manual
device.
Optional Devices
HW Setup and
Passwords.
The
Keyboard, for details
8-10
- Quick Links:
- Hardware
Hide quick links:
Advertisement
Table of Contents
