Related Manuals for Toshiba PSLD8U-01601E
Summary of Contents for Toshiba PSLD8U-01601E
- Page 1 User’s Manual TOSHIBA Satellite L350/Satellite Pro L350/ Satellite L350D/ Satellite Pro L350D series computers.toshiba-europe.com...
- Page 2 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
-
Page 3: Safety Instructions
Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and world-wide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. - Page 4 Directive 2004/108/EC and/or R&TTE Directive 1999/5/EC. Responsible for CE-marking is TOSHIBA EUROPE GmbH, Hammfelddamm 8, D-41460 Neuss, Germany. Manufacturer is TOSHIBA Corporation, 1-1 Shibaura 1-chome, Minato-ku, Tokyo, 105-8001, Japan. The complete official EU CE Declaration can be obtained on following internet page: http://epps.toshiba-teg.com...
-
Page 5: Working Environment
EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected / implemented those options / cables have to provide assurance that the system (PC plus options / cables) still fulfils the required standards. - Page 6 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series Modem warning notice Conformity statement The equipment has been approved to [Commission Decision "CTR21"] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.
- Page 7 For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. Disposal of Batteries and/or Accumulators...
- Page 8 The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.
-
Page 9: Following Information Is Only For Turkey
Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series Following information is only for Turkey: ■ Compliant with EEE Regulations: Toshiba meets all requirements of Turkish regulation 26891 "Restriction of the use of certain hazardous substances in electrical and electronic equipment". -
Page 10: Optical Disc Drive Safety Instructions
Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED Toshiba Samsung Strage Technology Korea corporation 416, Maetan-3Dong, Yeongtong-Gu Suwon City, Gyeonggi-Do, 443-742, Korea User’s Manual... - Page 11 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series TEAC DW-224E/DW-224S Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED TEAC CORPORATION 1-47 OCHIAI, TAMA-SHI, TOKYO, JAPAN DVD Super Multi (±R DL) drive Panasonic Communications...
- Page 12 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series Toshiba Samsung Storage Technology TS-L633A/TS-L633P TS-L633C/TS-L633Y Location of the required label PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE.
- Page 13 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series International precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT" To use this model properly, read the instruction manual carefully and keep this manual for your future reference.
- Page 14 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS...
-
Page 15: Table Of Contents
Special features ......... . 1-9 TOSHIBA Value Added Package ......1-10 Utilities and applications . - Page 16 TOSHIBA Disc Creator ........4-10...
- Page 17 TOSHIBA support ........
- Page 18 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series Preface Congratulations on your purchase of the TOSHIBA Satellite L350/ Satellite Pro L350/Satellite L350D/Satellite Pro L350D series computer. This powerful, lightweight notebook computer is designed to provide years of reliable, high-performance computing.
- Page 19 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program. It also tells how to set a password. Chapter 8, Optional Devices, describes the optional hardware available.
- Page 20 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series When procedures require an action such as clicking an icon or entering text, the icon’s name or the text you are to type in is represented in the typeface you see to the left. Display Names of windows or icons or text generated by the computer that appear on its display screen are presented in...
-
Page 21: General Precautions
Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. - Page 22 Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation.
-
Page 23: Instruction Manual For Safety And Comfort
Satellite L350/Satellite Pro L350/Satellite L350D/Satellite Pro L350D series ExpressCard overheating Some ExpressCards can become hot during prolonged use which may result in errors or instability in the operation of the device in question. In addition, you should also be careful when you remove an ExpressCard that has been used for a long time. -
Page 24: Chapter 1 Introduction
Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packaging materials for future use. - Page 25 ■ Display Drivers for Windows ■ LAN Driver ■ Pointing Device Driver ■ TOSHIBA Face Recognition(Is preinstalled with some models) ■ Sound Driver for Windows ■ Wireless LAN driver (Can be used only for Wireless LAN models) ■ TOSHIBA Assist ■...
-
Page 26: Features
Built-in Your computer is equipped with one processor and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start All Programs TOSHIBA Utilities PC Diagnostic Tool. - Page 27 Introduction Video RAM*6 Depending on the model you purchased. ® Mobile Intel GM45 Express Chipset: ® Mobile Intel GL40 Express Chipset: ® Mobile Intel PM45 Express Chipset: Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology.
- Page 28 Introduction Disks Hard disk drive The computer has one or two integrated, 2 1/2" (HDD)*4 hard disk drive(s) for nonvolatile storage of data and software(depending on the model you purchased). It comes in the following sizes. ■ 120 GB ■ 160 GB ■...
- Page 29 Introduction DVD Super Multi Some models are equipped with a full-size DVD (±R DL) drive Super Multi (±R DL) drive module that allows you to record data to rewritable CD/DVDs as well as run CD/DVDs without using an adapter. It reads DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.
- Page 30 Introduction Power Battery pack*3 The computer is powered by one rechargeable lithium-ion battery pack. RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar. AC adapter The universal AC adapter provides power to the system and recharges the batteries when they are low.
- Page 31 Operating system Windows 7 is available. Refer to the preinstalled Software section at the front of this chapter. TOSHIBA Utilities A number of utilities and drivers are preinstalled to make your computer more convenient to use. Refer to the Utilities and applications section in this chapter.
-
Page 32: Special Features
Introduction Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. To access the Power Options, click Start Control Panel System and Security Power Options. Hot keys... -
Page 33: Toshiba Value Added Package
When you turn on the power again, you can continue working right where you left off. TOSHIBA Value Added Package This section describes the TOSHIBA Component features preinstalled on the computer. TOSHIBA Power TOSHIBA Power Option provides you with the... -
Page 34: Utilities And Applications
■ TOSHIBA utility launcher function ■ When you start or resume your computer, the TOSHIBA Flash Cards may take a moment to become available and may display several times before completely activating. The hot key functions will be available once the TOSHIBA Flash Cards are completely active. -
Page 35: Options
TOSHIBA CD&DVD Applications Disc Creator TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. - Page 36 Battery Pack An additional battery pack 6 cell Type and 9 cell Type can be purchased from your TOSHIBA dealer. The battery pack is identical to the one that came with your computer. Use it as a spare or replacement.
-
Page 37: Chapter 2 The Grand Tour
The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed Figure below shows the computer’s front with its display panel in the closed position. -
Page 38: Left Side
The Grand Tour Set the switch to turn off in airplanes and hospitals. Check the Wireless communication indicator. It stops glowing when the wireless communication is terminated. Multiple digital This slot allows you to easily transfer data from media card slot devices, such as digital camera and PDA, that use flash memory (SD/SDHC/MS/MS Pro/MMC memory cards) - Page 39 The Grand Tour External monitor This 15-pin port allows you to connect an external port monitor. Fan vent Provides air flow for the fan. Be careful not to block the fan vent. Also be careful to keep foreign objects out of the vents. A pin or similar object can damage the computer’s circuitry.
-
Page 40: Right Side
The Grand Tour Right side Figure below shows the computer’s right side. Security lock slot DC IN 19V USB port Optical disc drive The right side of the computer Universal serial The one universal serial bus (USB) port complies bus (USB 2.0) ports with USB Serial 2.0 standards, which enables data transfer speeds 40 times faster than the USB 1.1 standards. -
Page 41: Back Side
The Grand Tour Back side Figure below shows the computer’s back side. Modem jack *Depending on the model you purchased The computer’s back side Modem jack In areas where an internal modem is installed as standard equipment, there is a modem jack that allows you to use a modular cable to connect the modem directly to a telephone line. -
Page 42: Front With The Display Open
Chapter 6, Power and Power-up Modes, describes how to access the battery pack. Additional battery packs can be purchased from your TOSHIBA dealer to extend the computer’s battery operating time. Battery release Slide this latch to release the battery pack. - Page 43 The Grand Tour Display screen*5 The full-color LCD displays high-contrast text and graphics The computer’s LCD is 17" WXGA+, 1440 horizontal × 900 vertical pixels. The computer has a Thin-Film Transistor (TFT) display. Refer to Appendix B, Display Controller. When the computer operates on power through the AC adapter, the display screen’s image will be somewhat brighter than when it operates on battery power.
-
Page 44: Function Button
The Grand Tour Function Button Six buttons are provided with some models. Available for use: Mute, CD/DVD, Play/Pause, Stop, Previous, Next. These buttons allow you to manage audio/video, run applications and access utilities. Refer to the Function Button section in Chapter 4, Operating Basics for details. -
Page 45: Keyboard Indicators
The Grand Tour DC IN The DC IN indicator glows green when DC power is supplied from the AC power adapter. If the adapter’s output voltage is abnormal or if the power supply malfunctions, this indicator shows no light. Power The Power indicator glows green when the computer is on. -
Page 46: Optical Disc Drive
Writable discs This section describes the types of writable CD/DVD discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics ■... -
Page 47: Ac Adapter
The Grand Tour DVD Super Multi (±R DL) drive The full-size DVD Super Multi drive module allows you to record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adapter. The read speed is slower at the centre of a disc and faster at the outer edge. - Page 48 Always use the TOSHIBA AC adapter that was included with your computer, or use AC adapters specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer possibly resulting in serious injury.
-
Page 49: Chapter 3 Getting Started
Getting Started Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer. It is intended to help you be more comfortable and productive while using a notebook computer. -
Page 50: Connecting The Ac Adapter
■ Always use the TOSHIBA AC adapter that was included with your computer or use AC adapters specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer possibly resulting in serious injury. - Page 51 Getting Started 1. Connect the power cord to the AC adapter. Connecting the power cord to the AC adapter 2. Connect the AC adapter’s DC output plug to the DC IN 19V jack on the right side of the computer. DC IN jack Connecting the adapter to the computer 3.
-
Page 52: Opening The Display
Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. To open the display, slide the latch to the right side and lift the panel up to the best viewing angle. When you open the display, be sure to hold the base firmly and lift up the monitor slowly. -
Page 53: Turning On The Power
Getting Started Turning on the power This section describes how to turn on the power After you turn on the power for the first time, do not turn it off until you have set up the operating system (OS) and the OS has started up 1. -
Page 54: Hibernation Mode
Getting Started 3. Click Windows Start button, then click Shut down. 4. Turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge. Hibernation mode The hibernation feature saves the contents of memory to the hard disk when the computer is turned off. -
Page 55: Sleep Mode
Getting Started Automatic hibernation mode The computer will enter hibernation mode automatically when you press the power button or close the lid. First, however, make the appropriate settings according to the steps below. 1. Open the Control Panel. 2. Open Hardware and Sound and open Power Options. 3. -
Page 56: Restarting The Computer
Getting Started Benefits of sleep mode The sleep feature provides the following benefits: ■ Restores the previous working environment more rapidly than hibernation feature. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the duration set by the system sleep feature. -
Page 57: System Recovery Options
Creating optical Recovery Discs and restoring the pre-installed software from them ■ Restoring the pre-installed software from the Recovery hard disk drive ■ Ordering Recovery Discs from TOSHIBA and restoring the pre-installed software from them* * Please note that this service is not free-of-charge User’s Manual... -
Page 58: Create Optical Recovery Media
Getting Started Create optical recovery media This section describes how to create Recovery Discs. ■ Be sure to connect the AC adaptor when you create Recovery Discs. ■ Be sure to close all other software programs except the Recovery Disc Creator. - Page 59 Keyboard, for further details. 1. Turn off your computer. 2. Turn on the computer and when the TOSHIBA screen appears repeatedly press the F8 key. 3. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press ENTER.
-
Page 60: Ordering Recovery Discs From Toshiba
Passwords. 4. A menu appears. Follow the on-screen instructions. Ordering Recovery Discs from TOSHIBA* You can order Product Recovery discs for your notebook from the TOSHIBA Europe Backup Media Online Shop. 1. Visit https://backupmedia.toshiba.eu on the Internet. 2. Follow the on-screen instructions. -
Page 61: Chapter 4 Operating Basics
Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operations including using the touchpad, optical disc drives, Audio/Video controls, the web camera, the microphone, the internal modem, wireless communication and LAN. It also provides tips on caring for your computer, and CD/DVDs. Using the touchpad To use the touchpad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go. -
Page 62: Using Optical Disc Drives
CD/DVD-based programs. You can run CD/ DVD without an adapter. When the computer is accessing a CD/DVD, an indicator on the drive glows. Use the TOSHIBA DVD PLAYER application to view DVD-Video discs.(CD-RW/DVD-ROM drive model or DVD Super Multi (±R DL) drive model) Please also refer to the Writing CD/DVDs on DVD Super Multi (±R DL) - Page 63 Operating Basics b. Pressing the eject button will not open the drawer when the drive’s power is off. If the power is off, you can open the drawer by inserting a slender object (about 15 mm) such as a straightened paper clip into the eject hole just to the right of the eject button.
- Page 64 Operating Basics 3. Lay the CD/DVD, label side up, in the drawer. Inserting a CD/DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/ DVD at an angle when you place it in the tray.
-
Page 65: Removing Discs
Operating Basics Closing the drawer Removing discs To remove the CD/DVD, follow the steps below and refer to figure below. Do not press the eject button while the computer is accessing the drive. Wait for the optical disc drive indicator to go out before you open the drawer. - Page 66 Operating Basics Removing a CD/DVD 3. Push the center of the drawer to close it. Press gently until it locks into place. Function Button This section describes a button function. Six buttons are provided with some models. Function Button Icon Function *CD/None Button...
-
Page 67: Writing Cd/Dvds On Dvd Super Multi (±R Dl) Drive
Based on TOSHIBA’s limited compatibility testing, we suggest the following manufacturers of CD-R/-RW and DVD-R/+R/-RW/+RW/-RAM/ +R DL/-R DL disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates. - Page 68 Operating Basics DVD-RW: DVD Specifications for DVD-RW Disc for General Version 1.2 MITSUBISHI KAGAKU MEDIA CO., LTD Victor Company of Japan, LTD DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co., Ltd.
-
Page 69: When Writing Or Rewriting
Write from the computer’s HDD to the CD/DVD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator is not recommended. When writing or rewriting Please observe/consider the following when you write or rewrite to a CD-R/ -RW, DVD-R/-R DL/-RW/-RAM or DVD+R/+R DL/+RW disc. -
Page 70: Toshiba Disc Creator
DVD-Video cannot be created using TOSHIBA Disc Creator. ■ DVD-Audio cannot be created using TOSHIBA Disc Creator. ■ You cannot use TOSHIBA Disc Creator's 'Audio CD' function to record music to DVD-R, DVD-R DL,DVD-RW, DVD+R, DVD+R DL,or DVD+RW media. User’s Manual... - Page 71 Operating Basics ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video, or DVD-ROM material that has copyright protection. ■ DVD-RAM discs cannot be backed up using the 'Disc Backup' functionof TOSHIBA Disc Creator.
-
Page 72: Toshiba Dvd Player
How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. TOSHIBA DVD PLAYER Please be aware of the following limitations when you use the TOSHIBA DVD PLAYER. Notes on Use ■... -
Page 73: Media Care
Operating Basics ■ Screen savers will not display while playing a movie in the “TOSHIBA DVD PLAYER”. The computer will also not go into sleep mode, hibernation mode or shutdown while using “TOSHIBA DVD PLAYER”. ■ Do not configure the Display automatic power off function to run while the “TOSHIBA DVD PLAYER”... - Page 74 Operating Basics Web camera lens Web camera LED Built-in microphone Web camera User’s Manual 4-14...
-
Page 75: Using Toshiba Web Camera Application
Operating Basics Using TOSHIBA Web Camera Application TOSHIBA Web Camera Application is pre-configured to start when you turn on Windows 7; if you need to restart it go to Start All Programs TOSHIBA Utilities Web Camera Application. Delete Recorded File... -
Page 76: Using The Microphone
Master Volume panel. Using the TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier. -
Page 77: How To Register The Face Recognition Data
Disclaimer TOSHIBA does not guarantee that the face recognition utility technology will be completely secure or error-free. TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHOBA is not liable for any failure or damage that might arise out of the use of the face recognition software or utility. -
Page 78: Windows Logon Via Toshiba Face Recognition
Utilities Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition. Two authentication modes are provided. ■ 1:N Mode Login screen: If the face authentication tile is selected by default, you can log in without using the keyboard or mouse. -
Page 79: Modem
Operating Basics 1:N Mode Login screen 1. Turn on the computer. 2. The Select Tiles screen will be displayed. 3. Select Start face recognition. 4. "Please face the camera" will be displayed 5. Verification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another. -
Page 80: Region Selection
To select a region, follow the steps below. 1. In Windows 7, click start, point to All Programs, point to TOSHIBA, point to Networking and click Modem Region Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. -
Page 81: Modem Selection
Operating Basics Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region. -
Page 82: Wireless Communications
TOSHIBA strongly recommends the customer to enable the encryption function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Wireless communication switch You can enable or disable RF transmission(Wireless LAN) functions on and off, with this switch (Provided with some models). -
Page 83: Lan
Operating Basics Wireless communication Indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Indicator off Wireless communication switch is set to off. Indicator glows Wireless communication switch is on. Wireless LAN is turned on by an application. If you used the Task Bar to disable Wireless LAN, restart the computer or follow the procedures below to enable the system to recognize Wireless LAN. -
Page 84: Cleaning The Computer
Operating Basics 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place. LAN jack Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub. -
Page 85: Moving The Computer
Operating Basics Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Make sure all disk activities are terminated before moving the computer. Check if the Disk indicator and external device indicator are off. ■... -
Page 86: Chapter 5 The Keyboard
The Keyboard Chapter 5 The Keyboard The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with. Keyboards for numerous languages are available. There are four types of keys: typewriter keys, function keys, soft keys, and Windows special keys. -
Page 87: Soft Keys: Fn Key Combinations
Soft keys: FN key combinations The FN (function) is unique to Toshiba computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features. - Page 88 Pressing FN + F9 enables or disables the touchpad function. Zoom Pressing FN + SPACE changes the display resolution. TOSHIBA zooming Pressing FN + 1 reduces the icon size on the utility (reduce) desktop or the font sizes within one of the supported application windows.
-
Page 89: Windows Special Keys
The Keyboard FN sticky key You can use the Toshiba Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and they press an "F number" key. To start the Toshiba Accessibility Utility, click Start... -
Page 90: Chapter 6 Power And Power-Up Modes
Power and Power-up Modes Chapter 6 Power and Power-up Modes The computer’s power resources include the AC adapter and an internal battery. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes. -
Page 91: Power Indicators
• DC IN off Battery charge is Computer goes into exhausted hibernation or shuts down (depending on the Toshiba power Management Utility Setting) No battery • No operation installed • LED: Battery off • DC IN off... -
Page 92: Battery Types
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. The battery recharges the RTC batteries. The battery maintains the state of the computer when you enable hibernation and sleep. -
Page 93: Real Time Clock Battery
The computer’s RTC battery is a lithium ion battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations... -
Page 94: Care And Use Of The Battery Pack
Power and Power-up Modes Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack. Follow the instructions in this section carefully to ensure safe operation and maximum performance. - Page 95 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.
-
Page 96: Charging The Batteries
Power and Power-up Modes 4. Always make sure the battery pack is installed correctly and securely. Otherwise, a battery pack could fall out and possibly cause injury. 5. Change the battery pack only in an ambient temperature between 5 and 35 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate and the battery life might be shortened. -
Page 97: Battery Charging Notice
The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Batteries charger to charge the battery pack. Never attempt to charge the battery pack with any other charger... -
Page 98: Monitoring Battery Capacity
Power and Power-up Modes Repeat the steps two or three times until the battery recovers normal capacity. Leaving the AC adapter connected will shorten battery life. At least once a month, run the computer on battery power until the battery is fully discharged, then recharged the battery. -
Page 99: Retaining Data With Power Off
Power and Power-up Modes ■ The condition of the battery terminals. Make sure the battery terminals stay clean by wiping them with a clean dry cloth before installing the battery pack. Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. -
Page 100: Replacing The Battery Pack
Power and Power-up Modes Replacing the battery pack When the battery pack reaches the end of its operating life you will need to install a new one. If the Battery indicator flashes orange shortly after fully recharging the battery, the battery pack needs to be replaced. You might also replace a discharged battery pack with a charged spare when you are operating your computer away from an AC power source. - Page 101 Slide the battery release latch and free the battery 7. Pull the battery pack forward to remove it. Battery Pack Removing the battery pack For environmental reasons, do not throw away a spent battery pack. Please return spent battery pack to your TOSHIBA dealer. User’s Manual 6-12...
-
Page 102: Starting The Computer By Password
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Be sure the computer’s power is off and all cables are disconnected. 2. Insert the battery pack. -
Page 103: Power-Up Modes
Power and Power-up Modes Power-up modes The computer has the following power-up modes: ■ Boot: Computer shuts down without saving data. Always save your work before you turn the computer off in boot mode. ■ Hibernation: Data in memory is saved to the hard disk. ■... -
Page 104: Chapter 7 Hw Setup And Passwords
TOSHIBA HW Setup allows you to configure settings for Display, CPU, Boot priority, Keyboard, USB, LAN, General and Password. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer. -
Page 105: User Password
HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Default and About. Default Returns all HW Setup values to the factory settings. About Displays the HW Setup version. Setup This field displays the installed BIOS version and date. Password User Password This option allows you to set or reset the user password for power on. -
Page 106: Power On Display
HW Setup and Passwords 3. Click the OK button. If the character string you enter matches the registered password, the password option is reset and the display changes to: Not registered If they do not match, the following message appears. You must repeat step 1. -
Page 107: Boot Priority
HW Setup and Passwords Always Low CPU power consumption and clock speed automatic switching function is disabled. The CPU always runs at low power consumption and low speed. Boot Priority Boot Priority Options This option sets the priority for booting the computer. The Boot Priority Options setting will be like the following You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:... -
Page 108: Legacy Usb Support
HW Setup and Passwords ■ If a supervisor password is set, the menu above does not appear when you use the user password to start the computer. ■ The selection method above does not change the boot priority settings in HW Setup. ■... - Page 109 HW Setup and Passwords Built-in LAN Enables built-in LAN functions. (Default) Enabled Disables built-in LAN functions. Disabled User’s Manual...
-
Page 110: Chapter 8 Optional Devices
Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. The following optional devices are available from your TOSHIBA dealer: Cards/Memory ■ ExpressCard ■ SD, SDHC, MS, MS Pro, MMC memory card ■ Memory expansion Power devices ■... -
Page 111: Removing An Expresscard
Optional Devices To install an ExpressCard, follow the steps below. 1. Insert the ExpressCard. 2. Press gently to ensure a firm connection. 3. Check the configuration in the HW Setup window to make sure it is appropriate for your card. ExpressCard Slot ExpressCard * The shape of the card depends on which type you purchased. -
Page 112: Multiple Digital Media Card Slot
Optional Devices Multiple digital media card slot The computer is equipped with a multiple digital media card slot that can accommodate Secure Digital (SD)/ Secure Digital High Capacity (SDHC)/ Memory Stick (MS)/Memory Stick Pro (MS Pro)/Multi Media Card (MMC) memory cards. These memory cards allow you to easily transfer data from devices, such as digital cameras and Personal Digital Assistants, that use SD/SDHC/MS/MS Pro/MMC memory cards. - Page 113 Optional Devices ■ Keep foreign objects out of the multiple digital media card slot. A pin or similar object can damage the computer's circuitry. ■ Make sure the SD/SDHC/MS/MS Pro/MMC card is oriented properly before you insert it. ■ Memory Stick Duo/PRO Duo and the Memory Stick adapter are not compatible with the multiple digital media card slot.
-
Page 114: Memory Expansion
Optional Devices ■ Make sure the multiple digital media card slot indicator is out before you remove the card or turn off the computer’s power. If you remove the card or turn off the power while the computer is accessing the card you may lose data or damage the card. - Page 115 Optional Devices Removing the cover 6. Insert the memory module into the connector on the computer. Press the module carefully and firmly to ensure a solid connection. 7. Push the module down so that it lies flat and is secured by two latches.
-
Page 116: Removing Memory Module
Optional Devices Pushing the memory module down 8. Seat the cover and secure it with one screw. 9. When you turn the computer on, it should automatically recognize the total memory capacity. Use the HW Setup program to verify that the added memory is recognized. -
Page 117: Additional Battery Pack (6 Cell And 9 Cell)
Optional Devices Removing the memory module 7. Seat the cover and secure it with one screw. Additional battery pack (6 Cell and 9 Cell) You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source, you can replace a low battery with a fully charged one. -
Page 118: Hdmi
Optional Devices When you turn on the power, the computer automatically recognizes the monitor and determines whether it is color or monochrome. You can use the HW Setup to select between Auto-Selected, LCD + Analog RGB or System LCD Only displays. Refer to Chapter 7, HW Setup and Passwords. -
Page 119: Setting For Display Video On Hdmi
Optional Devices 2. Plug the other end of the HDMI cable into the HDMI out port on your computer. ■ When you connect a television or external monitor to the HDMI port and the display output device is set to HDMI. When you unplug the HDMI cable and re-plug it in please wait at least 5 seconds before you replug the HDMI cable again. -
Page 120: Security Lock
Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer. -
Page 121: Chapter 9 Troubleshooting
Troubleshooting Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring. -
Page 122: Analyzing The Problem
Troubleshooting ■ Inspect all connecting cables for loose wires and all connectors for loose pins. ■ Check that your diskette is correctly inserted and that the diskette’s write protect tab is correctly set. Make notes of your observations and keep them in a permanent error log. This will help you describe your problems to your dealer. -
Page 123: Hardware And System Checklist
When the computer starts up, the self-test will be run automatically, and the following will be displayed: TOSHIBA Leading Innovation>>> This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system. -
Page 124: Overheating Power Down
Troubleshooting Power When the computer is not plugged into an AC adapter, the battery pack is the primary power source. However, your computer has a number of other power resources, including intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems. - Page 125 Troubleshooting Problem Procedure Battery doesn’t If the battery is completely discharged, it will not charge when the AC begin charging immediately. Wait a few minutes. adapter is attached If the battery still does not charge, make sure the (Battery indicator outlet is supplying power.
-
Page 126: Lcd Panel
Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard and Chapter 7, HW Setup Passwords. Problem Procedure Output to screen is Make sure the software you are using is not garbled remapping the keyboard. - Page 127 Troubleshooting Problem Procedur Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk. Refer to your OS documentation or online HELP for information on running SCANDISK and the defragmenter. As a last resort, reformat the hard disk. Then, reload the operating system and other files.
-
Page 128: Diskette Drive
Problem Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording. -
Page 129: Usb Mouse
Troubleshooting Problem Procedure The mouse pointer Try changing the speed setting in the mouse moves too fast or too control utility. Click Start Control Panel slow Hardware and Sound Devices and Printers Mouse to access it. When the reaction of Adjust the touch Sensitivity. - Page 130 Troubleshooting ExpressCard Refer also to Chapter 8, Optional Devices. Problem Procedure ExpressCard error Reseat the ExpressCard to make sure it is firmly occurs connected. Make sure the connection between the external device and the card is firm. Check the card’s documentation. If problems persist, contact your dealer.
-
Page 131: Sound System
Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. Make sure the headphone connection is secure. Check Windows Device Manager. Make sure the sound function is enabled and that settings for I/O address, Interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you may have connected... - Page 132 Troubleshooting Problem Procedure After making a call Make sure the tone or pulse selection in your you can’t hear a ring communications application is set correctly. You can also use the ATD command. Communication is cut The computer will automatically cut off off unexpectedly communication when connection with the carrier is not successful for a set time interval.
-
Page 133: Recovery Media
You will be directed to select Restore Original Factory Image from the drop-down menu. If you have not created Recovery Media, please contact TOSHIBA support for assistance. User’s Manual 9-13... -
Page 134: Toshiba Support
Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the location listed in the enclosed warranty booklet or visit http://www.toshiba-europe.com on the Internet. -
Page 135: Chapter 10 Legal Footnotes
Legal Footnotes Chapter 10 Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manual, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) related to this computer are marked with a blue *XX in this manual. -
Page 136: Memory (Main System)*2
Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power. -
Page 137: Hdd Drive Capacity And External Hdd Capacity*4
This is normal for all batteries. To purchase a new battery pack, see the accessories information that shipped with your computer or visit the TOSHIBA web site at http://www.pcsupport.toshiba.com. HDD Drive Capacity and External HDD Capacity One Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. -
Page 138: Non-Applicable Icons
Legal Footnotes Non-applicable icons Certain notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features. -
Page 139: Appendix A Specifications
Specifications Appendix A Specifications This appendix summarizes the computer’s technical specifications. Environmental requirements Operating Non-operating Ambient temperature 5 °C to 35 °C -20 °C to 60 °C Relative humidity 20 % to 80 % 10 % to 90 % Altitude (from sea level) 0 to 3,000 meters 0 to 10,000 meters Power requirements Power Requirements... - Page 140 Specifications Communication specifications Communication Data: Full duplex system Fax: Half duplex Communication Data protocol V.21/V.22/V.22bis/V.32 ITU-T-Rec /V.32bis/V.34/V.90 (Former CCITT) Bell 103/212A ITU-T-Rec V.17/V.29/V.27ter/V.21 ch2 (Former CCITT) Communication Data transmission and reception speed 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/...
-
Page 141: Display Controller
Display Controller Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pixels on or off. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors. The display controller also controls the video mode, which uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed on screen. -
Page 142: Card Specifications
Wireless LAN Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card specifications ■ Form Factor Mini Card ■ Compatibility IEEE 802.11 Standard for Wireless LANs ■... - Page 143 Subject to the radio regulations that apply in your country/region, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in your country/region.
- Page 144 Wireless LAN Frequency Range Channel ID 5150-5850 MHz Note 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 US only 5765 US only 5785 US only 5805 US only Table Wireless IEEE 802.11 Channels Sets (Revision A) Factory-set default channels Check if these channels can be used in your country/region.
-
Page 145: Certification Agencies
AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The AC input plug of power cord must be compatible with various international AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size:... - Page 146 AC Power Cord and Connectors The following illustrations show the plug shapes for USA, Australia Canada, United Kingdom, Europe, and China. United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency China Canada CSA approved CCC approved User’s Manual...
-
Page 147: If Your Computer Is Stolen
What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased. -
Page 148: Toshiba Theft Registration
If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. Satellite L350/ Satellite Pro L350/ Satellite L350D/... - Page 149 Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc Read Only Memory CD-RW: Compact Disc ReWritable...
- Page 150 Glossary IDE: integrated drive electronics I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory...
- Page 151 Glossary analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. ANSI: American National Standards Institute. An organization established to adopt and define standards for a variety of technical disciplines. For example, ANSI defined the ASCII standard and other information processing requirements.
- Page 152 Glossary buffer: The portion of the computer’s memory where data is temporarily stored. Buffers often compensate for differences in the rate of flow from one device to another. bus: An interface for transmission of signals, data or electric power. byte: The representation of a single character. A sequence of eight bits treated as a single unit;...
- Page 153 Glossary compatibility: 1) The ability of one computer to accept and process data in the same manner as another computer without modifying the data or the media upon which it is being transferred. 2) the ability of one device to connect to or communicate with another system or component.
- Page 154 Glossary delete: To remove data from a disk or other data storage device. Synonymous with erase. device driver: A program that controls communication between a specific peripheral device and the computer. The CONFIG.SYS file contains device drivers that MS-DOS loads when you turn the computer on. dialog box: A window that accepts user input to make system settings or record other information.
- Page 155 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that allows you to assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
- Page 156 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that allows you to set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
- Page 157 Glossary jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. KB: See kilobyte.
- Page 158 Glossary modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received. monitor: A device that uses rows and columns of pixels to display alphanumeric characters or graphic images.
- Page 159 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Option Utility: A TOSHIBA utility that allows you to set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
- Page 160 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to.
- Page 161 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. touchpad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
- Page 162 Index Index Battery, See also Battery pack indicator, 2-9 AC adapter, 1-7, 2-4, 2-11, A-1 additional, 1-13, 8-8 connecting, 3-2 Checklist safety instructions, -ii, -xxi equipment, 1-1 AC adaptor, 2-4 problems, 9-1, 9-3 DC IN 19V port, 2-4 Cleaning the computer, 4-24 problems, 9-4 COM port, 4-21 ASCII characters, 5-4...
- Page 163 5-3 port, 1-7 touchpad, 5-3, 5-4 problems, 9-10 wireless, 5-3 zoom, 5-3, 5-4 HW Setup FN + 1 (TOSHIBA zooming accessing, 7-1 utility reduce), 5-3 Boot Priority, 7-4 FN + 2 (TOSHIBA zooming CPU, 7-3 utility enlarge), 5-3 display, 7-3...
- Page 164 9-4 starting the computer with, self test, 9-3 6-13 sleep/hibernation, 9-12 user, 7-2 sound system, 9-11 PC card system start-up, 9-3 location of slots, 2-2 TOSHIBA support, 9-14 Pointing device touchpad, 9-8 touchpad, 4-1 USB, 9-11 User’s Manual Index-3...
- Page 165 3-7 Sound system, 1-7 headphone, 1-7, 2-2 microphone, 2-2, 5-2, 5-3, speaker, 2-7 volume control, 2-2 TOSHIBA Assist, 1-11 TOSHIBA Disc Creator, 4-10 TOSHIBA PC Diagnostic Tool, 1-11 TOSHIBA support, 9-14 TOSHIBA Theft Registration, TOSHIBA zooming utility, 1-11 Touchpad...