802.1Q Vlan Packet Forwarding - IBM BladeCenter Installation And User Manual
4-port gb ethernet switch module
Hide thumbs
Also See for BladeCenter:
- Installation manual (82 pages) ,
- User manual (78 pages) ,
- Manual (43 pages)
Table of Contents
Advertisement
IEEE 802.1Q (tagged) VLANs are implemented on the IBM BladeCenter 4-Port Gb
Ethernet Switch Module. 802.1Q VLANs require tagging, which enables them to
span the entire network (provided that all switches on the network are IEEE
802.1Q-compliant).
VLANs enable a network to be segmented to reduce the size of broadcast domains.
All packets entering a VLAN will be forwarded only to the stations (over IEEE
802.1Q enabled switches) that are members of that VLAN. This includes broadcast,
multicast, and unicast packets from unknown sources.
VLANs can also provide a level of security to your network. IEEE 802.1Q VLANs
will deliver packets only between stations that are members of the VLAN.
Any port can be configured as either tagging or untagging. The untagging feature of
IEEE 802.1Q VLANs enables VLANs to work with legacy switches that do not
recognize VLAN tags in packet headers. The tagging feature enables VLANs to
span multiple 802.1Q-compliant switches through a single physical connection and
enables spanning tree to be enabled on all ports and work normally.
The IEEE 802.1Q standard restricts the forwarding of untagged packets to the
VLAN of which the receiving port is a member.
The main characteristics of IEEE 802.1Q are as follows:
v Assigns packets to VLANs by filtering
v Assumes the presence of a single global spanning tree
v Uses an explicit tagging scheme with one-level tagging
802.1Q VLAN packet forwarding
The switch makes packet-forwarding decisions based on the following types of
rules:
Ingress rules
Forwarding rules between ports
Egress rules
The following illustration shows the 802.1Q VLAN packet-forwarding
decision-making process of the switch. For more information about packet
forwarding, see "Packet forwarding" on page 23. For more information about port
VLAN IDs (PVIDs), see "Port VLAN ID" on page 27. For more information about
tagging and untagging, see "Tagging and untagging" on page 28. For more
information about port states, see "STP port states" on page 122.
Rules relevant to the classification of received frames belonging to a VLAN.
The switch decides whether to filter or forward the packet.
The switch determines whether the packet must be sent tagged or
untagged.
Chapter 4. Switch management and operating concepts
25
Advertisement
Table of Contents
Troubleshooting
