Related Manuals for Kenwood KDC-X8019BT
Summary of Contents for Kenwood KDC-X8019BT
- Page 1 KDC-X8019BT KDC-X8019BTL CD-RECEIVER INSTRUCTION MANUAL © 2012 JVC KENWOOD Corporation B64-4900-00/00 (MW/M3W)
-
Page 2: Table Of Contents
File Search Illumination Color Selection About USB device Play Mode Auxiliary Input Display Setting About “KENWOOD Music Editor” USB and SD Setting About the Cell-Phone/ Bluetooth Clock and Other Functions 31 Skip Search Audio player Direct Music Search Menu List Clock &... -
Page 3: Before Use
• When you purchase optional accessories, check with To prevent a short circuit, never put or leave any your Kenwood dealer to make sure that they work metallic objects (such as coins or metal tools) inside with your model and in your area. the unit. -
Page 4: Component Names And Functions
<Bluetooth Setting> (page 44). 7 Auxiliary Input Terminal Portable audio device can be connected with the mini-plug (3.5 mm ø). • Use the mini-plug cable which is stereo type and does not have any resistance. KDC-X8019BT/ KDC-X8019BTL... -
Page 5: General Operation
15 seconds. • SRC Select mode 1: Pressing the [SRC] button each time switches between sources. For the KDC-X8019BT, start the procedure with Tuner (“TUNER”) ➜ Bluetooth Audio (“BT step 3. For the KDC-X8019BTL, start the procedure AUDIO”) ➜ USB (“USB”) or iPod (“iPod”) ➜ SD with step 1. -
Page 6: Menu List Operation
Press the [MENU] button for at least 1 second to return to the first hierarchy. Press the [MENU] button in the first hierarchy to exit the Menu List mode. ⁄ You cannot set the item with the “ ” icon displayed. • KDC-X8019BT/ KDC-X8019BTL... -
Page 7: Ipod/Iphone Operation
iPod/iPhone Operation MENU VOL DISP PRESET KCA-iP102 (optional accessory) is required to connect an iPod. ¢ iPod Basic Operation Selecting a song by browsing iPod Display Items Playing iPod “Music” • Connect an iPod “Playlists” Playlists When connected, the source is switched “Artists”... -
Page 8: Play Mode
[VOL] knob. Press the [MENU] button for at least 1 second, Exit Menu List mode and then press it again briefly. Press the [MENU] button for at least 1 second, and then press it again briefly. KDC-X8019BT/ KDC-X8019BTL... -
Page 9: Selecting The Search Mode
Direct Search ⁄ • The setting of “Skip Search” in <iPod Setting> (page You can quickly search the desired song by 8) and that in <USB and SD Setting> (page 14) are specifying its Search item (artist, album, etc.) and always the same. Changing the setting of one reflects initial. the other. Select iPod source Press the [PRESET] button for at least 1 second. Selecting the Search mode Enter Direct Search mode You can select the most suited search method for... -
Page 10: Related Search
“Not Found” is depending on the number of songs or items in iPod. displayed. • If the first character string begins with an article “a”, “an”, or “the” in the Alphabet Search mode, it is searched for in defiance of the article. KDC-X8019BT/ KDC-X8019BTL... -
Page 11: Ipod Setting
Skip Search You can scroll up or down according to the number of the selected Search items so that you can quickly switch the display position. Select iPod source Enter browsing mode Press the [MENU] button. Turn the [VOL] knob and press it when the desired item is displayed. -
Page 12: Usb Device/ Sd Card Operation
✍ SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. Moving to the next folder Press the [PRESET] button for at least 1 second. Song Select Press the [4] or [¢] button. KDC-X8019BT/ KDC-X8019BTL... -
Page 13: File Search
File Search Cancelling Menu List mode Press the [MENU] button for at least 1 second, Selecting the file you want to listen to from the and then press it again briefly. device being played now. ⁄ USB device/ SD card • When you search a song in the File Search mode, the unit memorizes the position of the song being played Display... -
Page 14: Usb And Sd Setting
Press the [PRESET] button for at least 1 second. always the same. Changing the setting of one reflects ⁄ the other. • This operation is effective only for the files registered in • This operation is effective only for the files registered in the database created with KENWOOD Music Editor. the database created with KENWOOD Music Editor. • Set the ratio with “Skip Search” in <USB and SD Setting> (page 14). KDC-X8019BT/ KDC-X8019BTL... -
Page 15: Direct Music Search
Function of remote control Direct Music Search Searching the music by entering the file number. Enter Direct Music Search mode Press the [DIRECT] button on the remote control. Enter the music number Press the number buttons on the remote control. Search the music Press the [4] or [¢] button. -
Page 16: Music Disc/ Audio File Operation
Press the [MENU] button for at least 1 second, Moving to the next folder and then press it again briefly. Press the [PRESET] button for at least 1 second. ⁄ • This operation can be performed only for the Audio file. Song Select Press the [4] or [¢] button. KDC-X8019BT/ KDC-X8019BTL... -
Page 17: Play Mode
Function of remote control Play Mode Direct Music Search You can select a Play Mode, such as Random play and Repeat play. Searching the music by entering the track number. Select CD source Enter Direct Music Search mode Press the [DIRECT] button on the remote Enter Menu List mode control. -
Page 18: Tuner Operation
“Auto2”: Search in order of the stations in the • You can register up to 18 FM stations and 6 AM stations. Preset memory. Selecting “Mixed Preset List” allows you to register up “Manual”: Normal manual tuning control. to six stations including FM and AM regardless of the selected source. KDC-X8019BT/ KDC-X8019BTL... -
Page 19: Auto Memory Entry
Cancelling the Preset Memory mode Function of remote control Press the [MENU] button. Direct Access Tuning Tuning in a desired radio station by entering the Auto Memory Entry frequency. Putting stations with good reception in the memory Select the radio band automatically. -
Page 20: Getting Started Of Bluetooth
If “Pairing Success” is displayed, registration is Turn the [VOL] knob. completed. Delete the selected Bluetooth device When “Confirm Device” is displayed, confirm Press the [VOL] knob for at least 2 seconds. connection with a Bluetooth device operation. KDC-X8019BT/ KDC-X8019BTL... -
Page 21: Registering From Bluetooth Devices
Start registering this unit by operating the Bluetooth device. By operating the Bluetooth device, register the hands-free unit or audio unit (pairing). Select “KENWOOD BT CD/R-6P1” from the list of found units. Enter a PIN code Input the PIN code (“0000”) in the Bluetooth device. -
Page 22: Bluetooth Audio Operation
• Some audio players cannot be controlled remotely or reconnected after Bluetooth disconnection. Operate the main unit of the audio player to connect Bluetooth. • Two audio devices can be connected simultaneously. • Speakers from which audio is output change depending on the Bluetooth setting “Bluetooth HF/Audio”. The default is Front. Refer to <Bluetooth Setting> (page KDC-X8019BT/ KDC-X8019BTL... -
Page 23: Operation Of Hands-Free Phoning
Operation of hands-free phoning Call Waiting MENU VOL DISP Answering Another Incoming Call with the Current Call Suspended Press the [ ] knob. Turn the [VOL] knob and press it when the desired item is displayed. ¢ Select “Answer”. Answering another Incoming Call after Receiving a Call Terminating the Current Call Press the [... -
Page 24: Making A Call
Turn the [VOL] knob and press it when the desired item is displayed. Select preset number. Phone number is displayed. Exit the preset dial mode Press the [MENU] button. Make a call Press the [VOL] knob. ⁄ • You need to register the preset dial number. Refer to <Registering to the Preset Dial Number List> (page 26). KDC-X8019BT/ KDC-X8019BTL... -
Page 25: Dial A Number
Calling a Number in the Call log Dial a Number Enter Bluetooth mode Enter Bluetooth mode Press the [ ] button. Press the [ ] button. Select the call log mode Select the number dial mode Turn the [VOL] knob and press it when the Turn the [VOL] knob and press it when the desired item is displayed. -
Page 26: 2 | Kdc-X8019Bt/ Kdc-X8019Btl
The category items in the Phone Book are displayed as follows: Display Information “GENERAL” / “ ” General “HOME” / “ ” Home “OFFICE” / “ ” Office “MOBILE” / “ ” Mobile “OTHER” / “ ” Other KDC-X8019BT/ KDC-X8019BTL... -
Page 27: Display Settings
Display Settings Display Setting PRESET MENU VOL You can select following Display Setting items. Select the source Pressing the [SRC] button repeatedly switches source. ✍ SRC Select mode 2: Press the [SRC] button and ¢ then turn the [VOL] knob. To determine the selected source, press the [VOL] knob. -
Page 28: Mode
“Display Select” Song title (“Song Title”) Artist name (“Artist name”) “Type Select” Selects from 5-line display mode, 3-line display Album name (“Album Name”) Blank (“Blank”) mode, or iPod-like display mode. “Side Select” Sets the source display. Text/ Icon/ Disappear KDC-X8019BT/ KDC-X8019BTL... -
Page 29: Display Setting
Select the source In Bluetooth audio source Pressing the [SRC] button repeatedly switches 5-line display mode source. Bluetooth audio (“Source Name”) Spectrum analyzer & Clock ✍ SRC Select mode 2: Press the [SRC] button and (“Speana/Clock”) Song title (“Song Title”) then turn the [VOL] knob. -
Page 30: Illumination Color Selection
Turn the [VOL] knob and press it when the and then press it again briefly. desired item is displayed. ⁄ Select the color from “Variable Scan”/ “Color1” — “Color 24”/ “User”. • AUX source is initially set to “OFF”. Before display setting, set “Built in AUX” described in <Initial Settings> (page 33) to “ON”. KDC-X8019BT/ KDC-X8019BTL... -
Page 31: Clock And Other Functions
Clock and Other Functions desired item is displayed. Release MENU VOL Exit Menu List mode Press the [MENU] button for at least 1 second, and then press it again briefly. Clock Adjustment ¢ You can adjust the clock. Enter Menu List mode Clock &... -
Page 32: Date Adjustment
“Sub Clock Adjust” of <Clock & Date display type setting> (page 31). Remarks • City Select Set a time zone for your area as “Home”. When you set a time zone for different area to the “Sub”, clocks for two time zones can be displayed on the clock display. See <Customization of Clock Display Mode> (page 29). For time zone list, see <City list> (page 58). KDC-X8019BT/ KDC-X8019BTL... -
Page 33: Initial Settings
“Menu Language” You can select the display language for the Menu list item. (KDC-X8019BTL only) “English”/ “Persian” “Chinese” Selects Chinese as the display language. (KDC-X8019BT only) “OFF”/ “ON” “Built in AUX” When this is set to ON, AUX source can be selected. -
Page 34: Theft Deterrent Faceplate
Reattaching the Faceplate Align the shaft on the unit with the depression on the faceplate. Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. KDC-X8019BT/ KDC-X8019BTL... -
Page 35: Audio Adjustments
Audio Adjustments “Sound Elevation” Virtually raises the sound field using MENU VOL the DSP. “OFF”/ “Low”/ “Middle”/ “High” “Volume offset” Sets each source’s volume as a difference from the basic volume. “–8” — “0” (AUX: “–8”— “+8”) “Rear Mute” Sets the Rear channel Mute. “ON”/ “OFF”... -
Page 36: Preset Equalizer Curve Select
Select the setting item to adjust Turn the [VOL] knob and press it when the Turn the [VOL] knob and press it when the desired item is displayed. desired item is displayed. ✍ Select the iPod Equalizer curve KDC-X8019BT/ KDC-X8019BTL... -
Page 37: Preset Equalizer Curve Select
Make a setting ⁄ Turn the [VOL] knob to select a setting value, • Select Main source by [SRC] button. and then press the [VOL] knob. • Adjust the volume of Front channel by [VOL] knob. • The Audio Control has no effect on sub source. Exit Audio Control mode • There are following limitations when Dual Zone System Press the [MENU] button for at least 1 second. is enabled. -
Page 38: Dsp Setup
[VOL] knob. To determine the Exit Audio Control mode selected source, press the [VOL] knob. Press the [MENU] button for at least 1 second. ⁄ Enter Audio Control mode Press the [VOL] knob. • You can compensate the distances in more details by using <Listening Position Fine Adjustments> (page 40) function. KDC-X8019BT/ KDC-X8019BTL... -
Page 39: Speaker Setting
Enter Speaker setting mode When Speaker network is set to 3 way Turn the [VOL] knob and press it when the Display Item Range desired item is displayed. “X’Over” > Select “Pro Setup” “Speaker Setting”. “Tweeter” “FC” Tweeter High Pass Filter 1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5 (kHz) Select the setting item to adjust “SLOPE”... -
Page 40: Car Type Selection
[VOL] knob. “DTA MID” / “R” Mid Range Right Exit Audio Control mode “DTA WF / “L” Woofer Left Press the [MENU] button for at least 1 second. “DTA WF” / “R” Woofer Right KDC-X8019BT/ KDC-X8019BTL... -
Page 41: Channel Level Fine Adjustments
Set the value Channel Level Fine Adjustments Turn the [VOL] knob to select a setting value, After DTA compensation, you can finely adjust and then press the [VOL] knob. the unsatisfactory speaker volume of respective The settings of the delay time are automatically speaker. -
Page 42: X'over Setting
Turn the [VOL] knob and press it when the • This function cannot be registered when the iPod desired item is displayed. Equalizer set in <Preset Equalizer curve Select> (page 36). > > Select “Pro Setup” “DTA Settings” “Reset DTA Setting”. Reset the DTA settings Turn the [VOL] knob to select “YES”, and then press the [VOL] knob. KDC-X8019BT/ KDC-X8019BTL... -
Page 43: Audio Preset Recall
Audio Preset Recall Recalling the sound setup registered by <Audio Preset Memory> (page 42). Select the source Pressing the [SRC] button repeatedly switches source. Select a source other than “STANDBY”. ✍ SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. -
Page 44: Bluetooth Setup
“SMS Reply” Select a method to reply to the received SMS. Refer to <SMS reply setting> (page 50). “SMS Message” Create an original message. Refer to <Creating an original message> (page 51). “Detailed Setup” Move to detailed item. KDC-X8019BT/ KDC-X8019BTL... -
Page 45: Registering Bluetooth Device
• This function does not work for call waiting. By operating the Bluetooth device, register the • “BT F/W Update” (Displaying the Firmware Version) hands-free unit (pairing). Select “KENWOOD BT Display the version of the firmware of this unit. USB/R-6P1” from the list of connected units. For how to update the firmware, access our web site. -
Page 46: Pairing
If “Completed” is displayed, registration is completed. 4. Go through the procedure step 3 of <Registering from this unit> and complete the registration (pairing). Cancelling Special device registration mode Press the [MENU] button for at least 1 second. ⁄ • If the device name is not in the list, select “Other Phones”. KDC-X8019BT/ KDC-X8019BTL... -
Page 47: Selecting The Bluetooth Device You
Selecting the Bluetooth device You Deleting a Registered Bluetooth Wish to Connect device When two or more Bluetooth devices have already You can delete a registered Bluetooth device. been registered, you need to select the Bluetooth Enter Bluetooth mode device you wish to use. Press the [ ] button. -
Page 48: Device
When the connection test is completed, test results are displayed on a function basis (“OK”: Enabled; “NG”: Disabled). Display Description “Pairing” Registration in this unit “HF Connect” Hands-free phoning “Audio Connect” Audio playback “PB Download” Audio playback Exit BT test mode Press the [VOL] knob. KDC-X8019BT/ KDC-X8019BTL... -
Page 49: Sms (Short Message Service)
SMS (Short Message Service) SMS (Short Message Service) MENU VOL PRESET DISP The SMS arrived at the cell-phone is displayed on the receiver. A newly arrived message is displayed. ¤ • To prevent car accidents, the driver should not read the SMS while driving. When a new message arrives Downloading the SMS “SMS Received”... -
Page 50: Sms Reply Setting
“Send Error” is displayed in case of failure in transmission of the message which is automatically returned when “Auto” is selected for Reply setting. While “SMS Resend” is still displayed on the display, selecting “YES” resends the reply. Selecting “NO” cancels the reply. KDC-X8019BT/ KDC-X8019BTL... -
Page 51: Creating An Original Message
Creating an original message SMS manual reply You can create an original return message. You can manually reply to the received SMS. Enter Bluetooth mode When a new message arrives Press the [ ] button. “SMS Reply” is displayed. Turn the [VOL] knob to select “YES”, and then Enter SMS Message select mode press the [VOL] knob. -
Page 52: Basic Operations Of Remote
In iPod source • Source select: [SRC] • Volume reduce: [ATT] • Enter Menu List mode: [5]/[∞] When the button is pressed again, the volume • Movement between items during Music search returns to the previous level. mode: [5]/[∞] • Return to previous item in mode: [ • Return to previous item in mode: [ • Exit from mode: [EXIT] • Music select: [4]/[¢] • Selection of item: [5]/[∞] • Determination: [ENT] • Enter Audio Control mode: [AUD] KDC-X8019BT/ KDC-X8019BTL... - Page 53 Hands-free phone control Preparing the remote control unit Pull the battery sheet out from the remote control Making a call • Enter Bluetooth mode: [ ] unit to the direction of the arrow. • Select a dialing method: [5]/[∞] ➜ [ENT] • Number dial input: Input a digit: [0] – [9] Input “+”: [¢] Input “#”: [FM] Input “*”: [AM]...
-
Page 54: Appendix
• Playing order of the Audio file • Type of control available varies depending In the example of folder/file tree shown below, the on the type of connected iPod. See files are played in the order from ① to ⑩. www.kenwood.com/cs/ce/ipod/ for further details. • The word “iPod” appearing in this manual indicates : Folder Folder ¡... -
Page 55: To This Unit
• OPP is a profile used to transfer data such as a phone book Music Editor Light ver1.1” or later. between units. • When you use the audio file with database • A2DP is a profile designed to transfer the music from an information added by the “KENWOOD Music Editor audio player. Light ver1.1”, you can search a file by title, album or • AVRCP is a profile designed to control playback and artist name using the <File Search> (page 13). selection of music by an audio player. -
Page 56: Menu List
“Clock & Date” – “Clock & Date” – “DISP & ILLUMI” – “DISP & ILLUMI” – “Initial Settings” – “SRC Select” “Beep” “TAG Language” “Menu Language” “Chinese” “Built in AUX” “Forced CD-DA” “Built in AMP” “Panel Beep” “DSI” “F/W Update” KDC-X8019BT/ KDC-X8019BTL... - Page 57 Function items appearing when the Music CD/ Function items appearing when the Hands-Free Audio file source is selected source is selected Display Page Display Page “Music” “SMS Inbox” “Play Mode” “BT Settings” – “File Scan” “Pairing” – “Track Scan” “Device Regist. ” “Folder Random”...
-
Page 58: City List
Tokyo +9:00 Harare +2:00 Toronto –5:00 Helsinki +2:00 Tunis +1:00 Hong Kong +8:00 Vancouver –8:00 Islamabad +5:00 Vienna +1:00 Istanbul +2:00 Warsaw +1:00 Jakarta +7:00 Yangon +6:30 Jerusalem +2:00 Zagreb +1:00 Johannesburg +2:00 Zurich +1:00 Kabul +4:30 (GMT) KDC-X8019BT/ KDC-X8019BTL... -
Page 59: Troubleshooting Guide
Troubleshooting Guide Some functions of this unit may be disabled by What might seem to be a malfunction in your unit some settings made on this unit. may just be the result of slight misoperation or miswiring. Before calling service, first check the •... - Page 60 • A n unsupported SD card is inserted. disconnects the sound. • C onnection to the iPod has failed. Check that the connected iPod is an iPod that is supported. See <About Audio file> (page 54) for information on supported iPods. KDC-X8019BT/ KDC-X8019BTL...
- Page 61 No Music Data/Error 15: • T he connected USB device or inserted SD card contains no playable audio file. • M edia was played that does not have data recorded that the unit can play. USB ERROR: Some trouble may have occurred to the connected USB device. Remove the USB device, then cycle the power switch to ON.
-
Page 62: Specifications
: AVRCP (Audio/Video Remote Control Profile) SD card section Compatible physical format : V ersion 2.00 Maximum memory capacity : 32 GB File System : FAT16/ 32 MP3 decode : C ompliant with MPEG-1/2 Audio Layer-3 WMA decode : Compliant with Windows Media Audio AAC decode : AAC-LC ”.m4a” files KDC-X8019BT/ KDC-X8019BTL... -
Page 63: Auxiliary Input
Audio section Maximum output power : 5 0 W x 4 Full Bandwidth Power (at less than 1% THD) : 22 W x 4 Speaker Impedance : 4 – 8 Ω Tone action BAND1 (62.5 Hz): ±9 dB BAND2 (100 Hz): ±9 dB BAND3 (160 Hz): ±9 dB BAND4 (250 Hz): ±9 dB BAND5 (400 Hz): ±9 dB BAND6 (630 Hz): ±9 dB BAND7 (1 kH): ±9 dB BAND8 (1.6 kH): ±9 dB BAND9 (2.5 kH): ±9 dB BAND10 (4 kH): ±9 dB BAND11 (6.3 kHz): ±9 dB BAND12 (10 kHz): ±9 dB BAND13 (16 kHz): ±9 dB Preout level / Load (CD) : 4000 mV/10 kΩ Preout impedance : ≤...