Table of Contents
Advertisement
Viewing the test log
The test log will not contain any information until after the diagnostic program has
run.
Note: If you already are running the diagnostic programs, begin with step 3.
To view the test log:
1. Turn on the server and watch the screen.
2. When the message F2 for Diagnostics appears, press F2.
3. When the Diagnostic Programs screen appears, select Utility from the top of
4. Select View Test Log from the list that appears; then, follow the instructions on
Diagnostic error message tables
For descriptions of the error messages that might appear when you run the
diagnostic programs, see "Diagnostic error codes" on page 125. If diagnostic error
messages appear that are not listed in those tables, make sure that the server has
the latest levels of BIOS, Advanced System Management Processor, ServeRAID,
and diagnostics microcode installed.
Light path diagnostics
The server has LEDs to help you identify problems with some server components.
These LEDs are part of the light path diagnostics built into the server. By following
the path of lights you can quickly identify the type of system error that occurred.
Power supply LEDs
The AC and DC power LEDs on the power supply provide status information
about the power supply. See "Installing a hot-swap power supply" on page 60 for
If the server is on, shut down the operating system and restart the server.
If a power-on password or administrator password is set, the server prompts
you for it. Type in the appropriate password; then, press Enter.
the screen.
the screen.
The system maintains the test-log data while the server is powered on. When
you turn off the power to the server, the test log is cleared.
15
Diagnostics
- Quick Links:
- Features and Specifications
Hide quick links:
Advertisement
Table of Contents
