hit counter script

Operating Guidelines; Routine Care; General Cleaning Safety Precautions - HP Z2 Mini G9 Maintenance And Service Manual

Workstation desktop pc
Table of Contents

Advertisement

Opaque shielding bags
Transparent metallized shielding bags
Transparent shielding tubes

Operating guidelines

This information details how to prevent overheating and to help prolong the life of the computer.
Keep the computer away from excessive moisture, direct sunlight, and extremes of heat and cold.
Operate the computer on a sturdy, level surface. Leave a 10.2 cm (4 inch) clearance on all vented
sides of the computer and above the monitor to permit the required airflow.
Never restrict the airflow into the computer by blocking any vents or air intakes. Do not place the
keyboard, with the keyboard feet down, directly against the front of the desktop unit as this also
restricts airflow.
Occasionally clean the air vents on all vented sides of the computer. Lint, dust, and other foreign
matter can block the vents and limit the airflow. Be sure to unplug the computer before cleaning the
air vents.
Never operate the computer with the cover or side panel removed.
Do not stack computers on top of each other or place computers so near each other that they are
subject to each other's recirculated or preheated air.
If the computer is to be operated within a separate enclosure, intake and exhaust ventilation must
be provided on the enclosure, and the same operating guidelines listed previously still apply.
Keep liquids away from the computer and keyboard.
Never cover the ventilation slots on the monitor with any type of material.
Install or enable power management functions of the operating system or other software, including
Sleep states.

Routine care

Use this information to properly care for your computer.

General cleaning safety precautions

Use this information to safely clean your computer.
CAUTION:
turned on or plugged in.
Never use solvents or flammable solutions to clean the computer.
Never immerse any parts in water or cleaning solutions; apply any liquids to a clean cloth and then
use the cloth on the component.
Always unplug the computer when cleaning with liquids or damp cloths.
Always unplug the computer before cleaning the keyboard, mouse, or air vents.
To prevent electric shock or damage to components, never clean a product while it is
Operating guidelines
13

Advertisement

Table of Contents
loading

Table of Contents