Configuration; Requirements; Configuring R/H Cpus - Siemens SIMATIC S7-1500 System Manual

Redundant system

Hide thumbs Also See for SIMATIC S7-1500:

Table of Contents

Configuration

Hardware and software requirements

You will find the hardware and software requirements for operating S7-1500R/H redundant

systems in the section Requirements (Page 129).

Consistency check

If you configure the STEP 7 project as topology, the consistency is then checked by STEP 7. An

incorrect configuration is indicated by error messages.

Introduction

The following section guides you step by step through the configuration of the R-CPUs for a

S7-1500R redundant system. The procedure for the project engineering of H-CPUs in S7-

1500H is identical to the project engineering of R-CPUs.

Requirements

The configuration detailed assumes that:

• You have set the IP address of the PG/PC.

1. Creating a project and R-CPUs

1. Create a new project in STEP 7. Give the project a name.

2. Select CPU 1515R-2 PN from the hardware catalog in the network view of the hardware

configuration.

3. Drag and drop the CPU to the task window in the network view.

S7-1500R/H redundant system

System Manual, 01/2024, A5E41814787-AF

Simatic s7-1500r/h