Siemens SIMATIC NET RUGGEDCOM RX1510 Equipment Manual page 23

Rugged multi service platforms

Hide thumbs Also See for SIMATIC NET RUGGEDCOM RX1510:

Table of Contents

Installing the Device

2.5.1 Connecting High AC/DC Power

Non-removable Screw Terminal Block

Positive/Live (+/L) Terminal

Ground Terminal

Negative/Neutral (-/N) Terminal

Figure 2.5

AC Terminal Block Wiring – Screw Terminal Block for HI Power Supplies

Note

For secure, reliable connections under severe shock or vibration, use M3.5 ring

lugs with a maximum outer diameter of 7 mm (0.28 in). Make sure no bare

metal is exposed beyond the safety cover.

Connect the positive wire from the power source to the positive/live (+/L)

terminal on the terminal block.

Connect the negative wire from the power source to the neutral/negative (-/N)

terminal on the terminal block.

For screw terminal blocks, install the safety cover.

Screw

Safety Cover

Screw Terminal Block

RUGGEDCOM RX1510 Device

Figure 2.6

Assembling the Safety Cover

Using a braided wire or other appropriate grounding wire, connect the ground

terminal to the chassis ground connection.

RUGGEDCOM RX1510

Equipment Manual, 10/2023, C79000-G8976-1055-25

Table of Contents