Table of Contents
Advertisement
Figure 28. Attaching the inner rail section to the enclosure
6. Use the M5 screws to install the outer rail member and bracket assembly to the rack, as shown in
Figure 29 on page 33.
Figure 29. Installing the rail assembly to the rack frame
For example, Figure 30 on page 33 shows the front of the rail that is attached to the frame.
Figure 30. Example of the required rack space
7. Repeat steps "5" on page 32 through "6" on page 33 to install the opposite rail.
8. Install the expansion enclosure in the rack, as described in "Installing a 5U expansion enclosure in a
rack" on page 38.
Chapter 2. Installing the system hardware 33
Advertisement
Table of Contents
