Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Remote Control and Peripherals Correct disposal of batteries in this product About the Samsung Smart Remote (M7*B / M8*B Series Models) About the Remote Control (M5*B Series Model) Connecting the Samsung Smart Remote to the product...
Before Using the Product Safety Precautions Warning A serious or fatal injury may result if instructions are not followed. Caution Personal injury or damage to properties may result if instructions are not followed. CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Caution Do not disconnect the power cord while the product is being used. ● Only use the power cord provided with your product by Samsung. Do not use the power cord with other ● products. Keep the power socket where the power cord is connected unobstructed.
Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place. –...
Page 6
Be sure to power off the product and disconnect the power cord when water or other foreign substances – have entered the product. Then contact Samsung Customer Service Centre. Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. " Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product (Service fee will be charged.) Do not press the product screen with hands or other objects.
Correct posture to use the product Use the product in the correct posture as follows: Straighten your back. ● Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. ● Keep your eyes directly in front of the screen.
Preparations Installation Attaching the Stand " Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. " Disassembly is the reverse order of assembly. S27BM50* / S32BM50* / S32BM70* Put the stand base onto the stand Tightly fasten the connecting As shown in the figure, remove...
Page 10
S43BM70* Put the stand base onto the stand As shown in the figure, remove the product and foam cushion, and then neck as the direction shown in the place the product on the table with its front side facing the floor. figure.
Page 11
S32BM80* Put the stand base onto the stand Tightly fasten the connecting screw As shown in the figure, remove neck as the direction shown in the at the bottom of the stand base. the product and foam cushion, and figure. Check that the stand neck is then place the product on the table firmly connected.
Connecting the camera to the product Camera Specifications 1920 x 1080, 30 fps (FHD) Resolution Automatic light compensation Privacy Cover 85° Viewing angle USB Type-C (USB 2.0) Connection " Before using the product, use a soft dry cloth to wipe the camera connector, to prevent malfunction due to foreign matter. - 12 -...
Precautions for moving the product S27BM50* / S32BM50* / S32BM70* Hold the lower corners or edges of the product Do not directly apply pressure on the screen. ● ● when moving it. Do not hold the screen when moving the product. ●...
Page 14
S32BM80* Hold the lower corners or edges of the product Do not directly apply pressure on the screen. ● ● when moving it. Do not hold the screen when moving the product. ● Do not hold the product upside down only by the Do not press down on the product.
Checking the space around the product Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product.
Adjusting the Product Tilt and Height " The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. S27BM50* / S32BM50* / S32BM70* -2.0° (±2.0°) ~ 22.0° (±2.0°) -2.0° (±1.0°) ~ 2.0° (±1.0°) S43BM70* -2.0°...
Page 17
S32BM80* -2.0° (±2.0°) ~ 15.0° (±2.0°) 0 ~ 120.0 mm (±5.0 mm) The product tilt and height can be adjusted. ● When adjusting the tilt and height, hold both sides of the product and avoid using excessive force to prevent ●...
Anti-theft Lock " An anti-theft lock allows you to use the product securely even in public places. " The locking device shape and locking method depend on the manufacturer. Refer to the manuals provided with your anti- theft locking device for details. "...
If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
Control Panel " You can turn on the product with the Power button at the bottom of the product, and then use the Control menu. The Control menu appears when the Power button is pressed while the product is On. S27BM50* / S32BM50* S43BM70* S32BM70*...
Page 21
The colour and shape of parts may differ from what is shown. ● The screen may dim if the protective film on the SAMSUNG logo or the bottom of the product is not detached. ● Please remove the protective film.
Connections Using various connectors, you can also connect external devices. Ports " The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to the actual product. S27BM50* / S32BM50* S32BM70* Port...
Page 23
S43BM70* Port Description Connects to a source device using an HDMI cable or HDMI-DVI cable. Connect to a USB device. ● Used to update the software. ● Connect to a USB device. Connects to a source device using a USB Type-C cable. When connecting a USB ●...
Page 24
MICRO HDMI DC 20V Port Description Connects to an external device using the HDMI cable supplied by Samsung (which is a High Speed HDMI certified cable). Connects to a source device using a USB Type-C cable. When connecting a USB ●...
Tidying Up the Connected Cables S27BM50* / S32BM50* / S32BM70* Pull the right side of the HOLDER-STAND CABLE Connect the corresponding cables. to remove from the stand. The right side of the cable can be damaged when pulled forcibly. Put both cables in the cable holder on the stand (HOLDER- STAND CABLE) to organise the cables, as shown in the figure.
Page 26
S43BM70* Pull the right side of the HOLDER-STAND CABLE Connect the corresponding cables. to remove from the stand. The right side of the cable can be damaged when pulled forcibly. Put both cables in the cable holder on the stand (HOLDER- STAND CABLE) to organise the cables, as shown in the figure.
Page 27
S32BM80* Connect the cables to the corresponding ports. Pass cables through the hole on the stand. Organise cables by passing them through the hole on the stand, as shown in the figures. - 27 -...
Remote Control and Peripherals You can control product operations with your Samsung Smart Remote or Remote Control. Pair external devices such as a keyboard for ease of use. About the Samsung Smart Remote (M7*B / M8*B Series Models) Learn about the buttons on the Samsung Smart Remote.
Page 29
Button Description Press to turn the Product on or off. (Power) Used as MIC when using voice recognition with the remote control. The LED on the front will light when charging. When the battery is fully charged, the LED will turn off. MIC / LED "...
Page 30
The functions related to the broadcast and channel are available only in some apps or external devices. " Use the Samsung Smart Remote less than 6 m from the product. The usable distance may vary with the wireless environmental conditions.
About the Remote Control (M5*B Series Model) Learn about the buttons on the Remote Control. - 31 -...
Page 32
Button Description Press to turn the Product on or off. (Power) Each time you press this button, Settings menu / virtual numeric pad / Option pad with Colour buttons are displayed alternately. Use this button to access additional options that are specific to the feature in use. (Settings / Number / Option button) Press to bring up the virtual numeric pad on the screen.
When you turn on the product for the first time, the Samsung Smart Remote pairs to the product automatically. If the Samsung Smart Remote does not pair to the product automatically, point it at the front of the product, and then press and hold the buttons simultaneously for 3 seconds or more.
Precautions and Notes You can get instructions and information that you must read after installation. Read After Installing the product Read this information after installing the product. Picture sizes and input signals Picture Size is applied to the current source. The applied Picture Size will remain in effect whenever you select that source unless you change them.
Supported Resolutions for UHD Input Signals Check the supported resolution for UHD input signals. Resolution: 3840 x 2160p ● " This function is supported by M7*B/M8*B series. If Input Signal Plus is set to Off Color Depth / Frame rate (fps) RGB 4:4:4 YCbCr 4:4:4 YCbCr 4:2:2...
Read Before Connecting a Computer (Supported Resolutions) Check the resolutions supported for PC input signals. When you connect your product to a computer, set the computer's video card to one of the standard resolutions listed in the tables below or on the next pages. The product will automatically adjust to the resolution you choose. Note that the optimal and recommended resolutions are 3840 x 2160 at 60 Hz (M7*B/M8*B series) and 1920 x 1080 at 60 Hz (M5*B series).
Supported Resolutions for Video Signals Check the resolutions supported for video signals. CTA-861 Port Horizontal Vertical Clock Polarity Resolution frequency frequency frequency Display format (horizontal / (Dots x lines) HDMI (KHz) (Hz) (MHz) vertical) Type-C 720 (1440) x 50 Hz 15.625 50.000 27.000...
List of graphic cards supporting HDR10 HDR10 is accessible only on Windows 10 systems equipped with graphic cards that support Play Ready 3.0 Digital Rights Management (for protected HDR content). Use graphic cards listed below for HDR10. NVIDIA GeForce 1000 series or higher ●...
Specifications General Model Name S27BM50* S32BM50* 27 Class 32 Class Size (27.0 Inches / 68.6 cm) (31.5 Inches / 80.1 cm) Display area 597.888 mm (H) x 336.312 mm (V) 698.4 mm (H) x 392.85 mm (V) Pixel Pitch 0.3114 mm (H) x 0.3114 mm (V) 0.36375 mm (H) x 0.36375 mm (V) Maximum Pixel Frequency 94 MHz...
Page 41
Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the LCD panel. This does not affect product performance. The specifications are subject to change without notice to improve quality. ● For detailed device specifications, visit the Samsung website. ● (Europe only) ●...
Appendix Responsibility for the Pay Service (Cost to Customers) When the service is requested, in spite of in warranty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. If a service technician is requested to give instructions on how to use product or simply adjusts options without ●...
External impact or drop. ● Use of supplies or separately sold product unspecified by Samsung. ● Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics ● Co., Ltd. Remodeling or repairing the product by customer.
WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) The marking on the battery, manual or packaging indicates that the battery in this product should not be disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.