Table of Contents
Advertisement
Quick Links
User Manual
S27B80* S32B80*
(Saudi Arabia only : S27B800PXM / S32B800PXM)
The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is
prohibited.
Trademarks other than that of Samsung are owned by their respective owners.
Advertisement
Table of Contents
Related Manuals for Samsung S27B800PXM
Summary of Contents for Samsung S27B800PXM
- Page 1 The contents of this manual are subject to change without notice to improve quality. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than that of Samsung are owned by their respective owners.
-
Page 2: Table Of Contents
Table of contents Before Using the Product Connecting and Using a Source Device Menu Safety Precautions Read below before connecting the product. Picture Electricity and Safety Ports Eye Care Installation Operation Connecting and Using a PC PIP/PBP Connection Using the HDMI Cable Cleaning OnScreen Display Connection Using an HDMI-DVI Cable... - Page 3 Table of contents Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Product diagnosis (Screen issue) Checking the Resolution and Frequency Check the following. Q & A Specifications General Standard Signal Mode Table Appendix Responsibility for the Pay Service (Cost to...
-
Page 4: Before Using The Product
DC voltage: Rated voltage marked • Only use the power cord provided with your product by Samsung. Do not use the power cord with literature concerning operation and with this symbol is DC voltage. other products. -
Page 5: Installation
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Centre if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result. -
Page 6: Operation
‒ Be sure to power off the product and disconnect the power cord when water or other foreign Warning substances have entered the product. Then contact Samsung Customer Service Centre. • There is a high voltage inside the product. Never disassemble, repair or modify the product •... -
Page 7: Cleaning
― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product • Disconnect the power cord from the power socket if you do not plan on using the product for an (Service fee will be charged.) -
Page 8: Correct Posture To Use The Product
Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. •... -
Page 9: Preparations
Chapter 02 Preparations Installation Attaching the Stand ― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. ― Disassembly is the reverse order of assembly. Put the stand base onto the stand neck Tightly fasten the connecting screw at as the direction shown in the figure. -
Page 10: Precautions For Moving The Product
Precautions for moving the product Checking the space around the product Make sure to have enough space for ventilation when placing the product. An internal temperature rise may cause fire and damage the product. Maintain enough space around the product as shown in the diagram when installing the product. -
Page 11: Adjusting The Product Tilt And Height
Adjusting the Product Tilt and Height Caution ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -2.0° (±3.0°) ~ 25.0° (±3.0°) 0 ~ 120.0 mm (±5.0 mm) •... -
Page 12: Rotating The Product
Rotating the Product You can rotate your product as shown below. ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. -2.0° (±2.0°) ~ 92.0° (±2.0°) -30.0° (±3.0°) ~ 30.0° (±3.0°) •... -
Page 13: Anti-Theft Lock
If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount with your anti-theft locking device for details. -
Page 14: Control Panel
Control Panel Parts Description 5-Way Button Multi directional button that helps navigate. This LED is power status indicator. ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without ― You can select the power LED operation to be enabled or disabled on Power LED notice to improve quality. -
Page 15: Direct Key Guide
Direct Key Guide ― On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed. Brightness Volume Source Features Eye Saver Mode Off ― The Direct Key Guide screen shows if Eye Saver Mode is enabled. -
Page 16: Connecting And Using A Source Device
Chapter 03 Connecting and Using a Source Device Read below before connecting the product. Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. Before connecting the product, make sure you remove the power cables from both the product and the external device to prevent damage to the product due to a short circuit or over current. -
Page 17: Ports
Ports Port Description Connect to an audio output device such as headphones. ― The functions available may vary depending on the product model. The colour and shape of parts may • Connect to a USB device. differ from what is shown. Specifications are subject to change without notice to improve quality. Refer to •... -
Page 18: Connecting And Using A Pc
Connecting and Using a PC Connection Using an DP Cable Select a connection method suitable for your PC. Connection Using the HDMI Cable ― It is recommended to use the DP cable provided as an accessory. If not provided, be sure to use a DP cable of 1.5 m or below. -
Page 19: Connection Using The Usb Type-C Cable
Connection Using the USB Type-C Cable ― It is recommended to use the USB Type-C cable provided as an accessory. ― Check the bandwidth of your USB Type-C cable whether it is available. The output may not be adequate depending on the cable specification and condition. ―... -
Page 20: Connecting The Product To A Pc As A Usb Hub
Connecting the Product to a PC as a USB HUB Using the product as a hub, connect and use various source devices with the product at a time. ― To detect and start a USB device faster, connect the USB device to the port on the product. -
Page 21: Tidying Up The Connected Cables
Tidying Up the Connected Cables Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on information message and change the resolution on your PC to the optimum setting. -
Page 22: Menu
Chapter 04 Menu Function Key Guide → ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Picture Description Picture Mode... - Page 23 Description Picture Mode mode When the external input is connected through HDMI/DP/USB Type-C and PC/AV Mode is set to AV, Picture Mode has three automatic picture settings (Dynamic, Standard and Movie) that are preset at the factory. You can activate either Dynamic, Standard or Movie.
- Page 24 Description Color 10p White Balance Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness. • Interval: Select an interval to adjust white balance. • Red: Adjust the red level. • Green: Adjust the green level. •...
- Page 25 Description Color Color Space Configure colour space settings to refine the spectrum of colours on your screen. • Color Space: Configure colour space settings to refine the spectrum of colours on your screen. • Color: Define the colour range that can be displayed on your screen. •...
- Page 26 Description Game Mode Configure the product screen settings for game mode. Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is connected. ― This menu is not available when PIP/PBP Mode is enabled.
- Page 27 Description Screen Adjustment Adjust the position of the screen or increase the picture quality. • H-Position: Move the screen to the left or right. • V-Position: Move the screen up or down. ― Connection Using the HDMI, DP, USB Type-C Cable. ―...
-
Page 28: Eye Care
Eye Care Description Adaptive Picture Optimises brightness and provides the best picture quality in real time, based on the lighting condition and the content you're viewing. ― This menu is not available when Eco Sensor Mode is enabled. ― This menu is not available when Picture Mode is set to sRGB... - Page 29 Description Source Select the source for each screen. Sound Source Set which screen you want to hear the sound for. In PIP mode • In PBP mode • Screen Ratio Choose the size and aspect ratio of the picture displayed on screen. mode •...
-
Page 30: Onscreen Display
OnScreen Display Description Transparency Set the transparency for the menu windows. Position • H-Position: Move the menu position to the left or right. • V-Position: Move the menu position up or down. Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. Display Time Set how long the menu window will remain on screen for when it is not in use. -
Page 31: System
System Description Local Dimming Control the brightness of individual areas on the screen to maximise contrast automatically. ― This menu is not available when PIP/PBP Mode is enabled. ― This menu is not available when Eye Saver Mode is enabled. Volume Change the Volume... - Page 32 Description Off Timer Plus Off Timer • Timer: Turn on Off Timer mode. • Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours.
- Page 33 Description Auto Source Switch+ Auto Source Switch+ When there is no signal, the display automatically switches to the newly connected device. ― This function may not be supported depending on the model or geographical area. USB-C Switch When there is no signal, the display automatically switches to the new device connected to the USB-C port. Key Repeat Time Control the response rate of a button when the button is pressed.
-
Page 34: Support
Software Update Update software using an update file on a USB device. Save the update file (in .bin format) that you downloaded from the Samsung website (http://www.samsung.com/sec) to a USB device. Connect the USB device to the port on the monitor. -
Page 35: Installing The Software
Installing the Software Easy Setting Box Driver Installation To install the latest version of the product driver, download it from the Samsung website (http://www. samsung.com). ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. -
Page 36: Troubleshooting Guide
Check the following. Customer Service Centre Caution ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. When the product makes popping (cracking) sound. The sound may be caused by contraction or expansion from temperature change of external Product diagnosis (Screen issue) components or internal circuit of the product. - Page 37 Screen issue Screen colour is inconsistent. Change the Color settings. The power LED is off. The screen will not switch on. The colours on the screen have a shadow and are distorted. Check that the power cable is connected properly. Change the Color settings.
- Page 38 Sound issue There is no sound. Re-check the condition of the connected headphone or earphone and/or adjust the volume. Check the volume. Check whether the volume of the product or the source device is set to mute. The volume is too low. Adjust the volume.
-
Page 39: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Screen Refresh Rate under Monitor settings. •... -
Page 40: Specifications
The specifications are subject to change without notice to improve quality. Refer to the label at the back of the product as the standard voltage can • For detailed device specifications, visit the Samsung website. vary in different countries. Signal connectors... -
Page 41: Standard Signal Mode Table
Standard Signal Mode Table Model Name S27B80* / S32B80* Synchronization Horizontal Frequency 30 ~ 135 kHz Vertical Frequency 30 ~ 75 Hz Resolution Optimum Resolution 3840 x 2160 @ 30 Hz (HDMI 1.4) 3840 x 2160 @ 60 Hz (HDMI 2.0, DisplayPort, USB Type-C) Maximum Resolution If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. - Page 42 Port Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution (kHz) (Hz) (MHz) (H/V) HDMI IN DP IN / USB Type-C IN VESA, 1280 x 1024 63.981 60.020 108.000 VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500...
-
Page 43: Appendix
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •...