Page 2 6 ohm a 16 ohm. fatal para al receptor. • Conecte los cables de altavoz correctamente haciendo coincidir las polaridades ( / ) entre los cables de altavoz y los terminales de SPEAKERS. Sony Corporation © 2022 Printed in Malaysia / Imprimé en Malaisie...
Page 3 Connecting a TV, AV devices, and FM wire antenna (aerial) Raccordement d’un téléviseur, de périphériques AV et d’une antenne fil FM Conexión de un televisor, dispositivos AV y antena FM de cable Téléviseur Televisor HDMI cable Câble HDMI Cable HDMI If your TV is compatible with eARC (Enhanced Audio Return Channel) or ARC (Audio Optical digital cable FM wire antenna (aerial)
Page 4 Performing the Easy Setup and starting playback Exécution d’Easy Setup et démarrage de la lecture Ejecución de Easy Setup e inicio de la reproducción Place the mic stand at your listening position and set the calibration The Easy Setup screen appears automatically. microphone on the mic stand.
Page 5 Multi Channel Operating Instructions AV Receiver Mode d’emploi Manual de instrucciones Récepteur AV Multicanal ©2022 Sony Corporation Printed in Malaysia / Imprimé en Malaisie 5-037-028-11(1) STR-AN1000...
Page 6 If you have any questions about this product: For Remote Commander Visit: https://www.sony.com/electronics/ support CAUTION Contact: Sony Customer Information Service Risk of explosion if battery is replaced by an Center at 1-800-222-7669 incorrect type. Write: Sony Customer Information Service Dispose of used batteries according to the Center 12451 Gateway Blvd., Fort Myers, FL 33913...
Page 7 You are cautioned that any changes or Data transmission is always initiated by modifications not expressly approved in this software, which is passed down through the manual could void your authority to operate this MAC, through the digital and analog baseband, unit.
Page 8: Manuals Provided For This Product
Installation Connections Initial Setup Basic operations Listening/Watching Advanced operations Listening/Watching Advanced operations BLUETOOTH features Network features Multi-zone features Sound effect features Other features Adjusting settings Troubleshooting Precautions / Specifications To read the Help Guide, go to the following website: https://rd1.sony.net/help/ha/strtaan10/h_zz/...
Page 9: Table Of Contents
Installing Speakers ........15 conceptual drawings, and may be different Connecting Speakers ........17 from the actual products. Connecting to Sony wireless rear speaker/ • The items displayed on the TV screen may subwoofer ..........26 vary depending on the area. Connecting a TV ...........28 •...
Page 10: Supplied Accessories
Note Supplied Accessories • Do not leave the remote control in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds • Remote control (1) of batteries.
Page 11: Parts And Controls
Parts and Controls Receiver Front panel   (power) (page 42)  Remote control sensor Receives signals from remote control.  Power indicator (page 8)  PURE DIRECT  SPEAKERS (page 43) The indicator above the button lights up when  BLUETOOTH the Pure Direct function is activated. Switches the receiver to the BLUETOOTH®  MASTER VOLUME (page 44) function by pressing the button when  INPUT SELECTOR (page 44)
Page 12 Power indicator • Green: The receiver is turned on. • Amber: The receiver is in standby mode, and you have set one of the following: – [Control for HDMI] or [Network/Bluetooth Standby] is set to [On]. – [Standby Through] is set to [On] or [Auto]. –...
Page 13 Indicators on the display panel  D.C.A.C.  DSur Lights up when the measurement results of the Lights up when Dolby Surround decoding is Auto Calibration (D.C.A.C. IX) function are activated. applied. Note  360SSM These indicators may not light up depending Lights up when the 360 Spatial Sound Mapping on the speaker pattern setting.
Page 14 Rear panel  COAXIAL IN SA-CD/CD jack  IR REMOTE IN/OUT jacks • You can control the receiver from a distance  Wireless LAN antenna by connecting an IR repeater (not supplied) to  HDMI IN/OUT jacks the IR REMOTE IN jack. • You can start or stop playback of devices such  LAN port as a CD player connected to the receiver by  SPEAKERS terminals...
Page 15 About input/output of video signals The digital video signals input to the HDMI IN jacks of this receiver are output from HDMI OUT A (TV) or HDMI OUT B/ZONE 2 jacks only. The analog video signals input from VIDEO IN jacks are output from the MONITOR OUT jack only.
Page 16  Input buttons Remote control GAME, MEDIA BOX, BD/DVD, SAT/CATV, VIDEO, AUX, TV, SA-CD/CD, OTHERS Selects the input connected to the device you want to play. When you press any of the input buttons, the receiver turns on. • Press OTHERS button repeatedly to select playback source other than above.
Page 17 / (previous/next),  (play/pause) Skip, play, pause operation. PRESET +/– Selects preset stations or channels. Press and hold to scan stations automatically. HDMI OUT Switches the output for two TVs connected to the HDMI OUT A (TV) and HDMI OUT B/ZONE 2 jacks.
Page 18 Buttons that can be operated for each zone Buttons Operation target zone of the remote control MAIN ZONE 2 ZONE 3  (power) button    ZONE 3, ZONE 2, MAIN ZONE 3, ZONE 2, MAIN    Input selection buttons GAME, MEDIA BOX, BD/DVD, SAT/CATV, ...
Page 19: Preparation
Preparation Installing Speakers You can connect up to 7 speakers and 2 subwoofers to this AV receiver. Place the speakers and subwoofers according to the speaker system of your preference. Speaker installation example As the subwoofer (SW) does not emit highly directional signals, you can place it wherever you want. Abbreviations Speaker name Functions...
Page 20 Abbreviations Speaker name Functions used in illustrations Surround Dolby Atmos Produces sounds from the top middle left/right channels enabled left speaker and reflects these sounds off the ceiling. Enables playing back sounds of Dolby Atmos 3D movies without the need to Surround Dolby Atmos install ceiling speakers.
Page 21: Connecting Speakers
Connecting Speakers Note • Connect speakers with a nominal impedance of 6 ohms to 16 ohms. • Before connecting cables, be sure to disconnect the AC power cord (mains lead). • Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cables are not touching each other between the SPEAKERS terminals.
Page 22 • This receiver allows you to connect Sony wireless rear speakers and a Sony subwoofer (page 26). • When your Sony TV has the S-CENTER SPEAKER IN jack, you can output the center part of the receiver sound from the TV speaker (page 30).
Page 23 5.1-channel speaker system  30˚  100˚ – 120˚ Surround speakers Center speaker Subwoofer Front speakers  Monaural audio cable (not supplied)  Speaker cable (not supplied)
Page 24 7.1-channel speaker system using surround back speakers  30˚  100˚ – 120˚  Same angle Surround speakers Center speaker Subwoofer Surround back speakers Front speakers  Monaural audio cable (not supplied)  Speaker cable (not supplied)
Page 25 5.1.2-channel speaker system using top middle speakers  30˚  100˚ – 120˚  70˚ –110˚ Surround speakers Center speaker Front speakers Subwoofer Top middle speakers*  Monaural audio cable (not supplied)  Speaker cable (not supplied) * After you have made the connection, set [Speaker Pattern] in [Manual Speaker Settings] under [Speaker Settings] to [5.1.2 (TM)].
Page 26 5.1.2-channel speaker system using Dolby Atmos enabled speakers  30˚  100˚ – 120˚ Surround speakers Center speaker Subwoofer Front Dolby Atmos Front speakers enabled speakers*  Monaural audio cable (not supplied)  Speaker cable (not supplied) * After you have made the connection, set [Speaker Pattern] in [Manual Speaker Settings] under [Speaker Settings] to [5.1.2 (FD)].
Page 27 5.1-channel speaker system with Zone 3 speakers Main zone Zone 3  30˚  100˚ – 120˚ Surround speakers Center speaker Subwoofer Speakers (Zone 3)* Front speakers  Monaural audio cable (not supplied)  Speaker cable (not supplied) * For details on using the Zone 3 speakers, see “Using the Multi-Zone Features” (page 45).
Page 28 5.1-channel speaker system with Bi-Amplifier connection When the front speakers are Bi-wire speakers, which are equipped with separate terminals for high-frequency sounds (tweeter) and low-frequency sounds (woofer), you can make the bi-amplifier connection. Connect each pair of terminals for tweeter and woofer to the SPEAKERS FRONT A terminals and SPEAKERS SURROUND BACK/HEIGHT terminals of this receiver.
Page 29 Note You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back and height/overhead speakers (page 18).
Page 30: Connecting To Sony Wireless Rear Speaker/Subwoofer
[Surround Back Speaker] on the [Wireless Speaker Assign] screen in Auto Calibration to assign the speaker position. • For the wireless rear speaker/subwoofer models compatible with the receiver, visit the Sony website. • If you connect 2 wireless subwoofers, use the same model.
Page 31 If wireless transmission is unstable If you use multiple wireless systems, such as a wireless LAN, the wireless signals may become unstable. In this case, the transmission may be improved by changing the following setting. Press HOME. The home menu is displayed on the TV screen. Select [Setup] –...
Page 32: Connecting A Tv
The menu is displayed on the TV screen only when you connect the TV to the HDMI OUT jack. Sony recommends that you use the HDMI OUT jack to connect the TV because in many cases you will have to perform the settings of this receiver using the menu.
Page 33 Connecting a TV compatible with the eARC or ARC function via an HDMI connection Connect your TV to the HDMI OUT A (TV) jack of the receiver. With just one HDMI cable connection, you can listen to the TV audio from the speakers connected to the receiver while the receiver sends audio and video signals to the TV.
Page 34 TV speaker. • Some Sony TVs have an S-CENTER SPEAKER IN jack. For details, see the operating instructions of your TV. • If you connect your TV to the S-CENTER OUT jack of the receiver, press HOME, select [Setup] –...
Page 35 Connecting a TV incompatible with the eARC and ARC functions via an HDMI connection Connect your TV to the HDMI OUT A (TV) jack of the receiver. When you connect the receiver to a TV using the HDMI cable , the receiver can output audio and video signals to the TV.
Page 36 Connecting a TV without HDMI jacks Connect your TV to the MONITOR OUT jack of the receiver. You need to connect the optical digital audio cable  or audio cable  to the TV in addition to connecting the video cable . Video signals Audio signals Recommended connection...
Page 37: Connecting Audio-Visual Devices
Connecting Audio-Visual Devices Connecting devices with HDMI jacks Before connecting cables, be sure to disconnect the AC power cord (mains lead). The following illustrations are connection examples of devices. Connect to the HDMI jack compatible with the video signal of your device. Audio/Video signals Super Audio CD...
Page 38 Video signals supported by HDMI jacks This connection is an example. Connect to HDMI jacks that support the video signals of your device. HDMI IN jack Devices to be connected SA-CD/CD (for AUDIO)* VIDEO* Connect a device that supports video signals up to 4K/60p. SAT/CATV BD/DVD MEDIA BOX...
Page 39 Connecting devices with jacks other than HDMI jacks Before connecting cables, be sure to disconnect the AC power cord (mains lead). VCR, DVD recorder, Cable box or satellite box camcorder, video game Audio signals Video signals Audio signals Video signals Audio signals Super Audio CD player, CD player, Turntable* ...
Page 40 • You can connect devices other than those indicated above to the AUDIO IN jacks (SAT/CATV, AUX, and SA-CD/CD). • You can rename each input whose name appears on the display panel of the receiver. For details, visit the Help Guide.
Page 41 Connecting another amplifier or TV in Zone 2 HDMI input video/audio signals are output in Zone 2 using the HDMI OUT B/ZONE 2 jack of the receiver. Before connecting cables, be sure to disconnect the AC power cord (mains lead). When connecting to only TV in Zone 2 Main zone Zone 2...
Page 42 Note • To use this connection, set [HDMI OUT B Mode] in the [HDMI Settings] menu to [Zone2]. • You can only playback input from the HDMI IN jacks in Zone 2. When [SOURCE] is selected, the video and sound that are input from the HDMI IN jack selected in the main zone are played. •...
Page 43: Connecting The Antenna (Aerial)
Connecting the Antenna Connecting to a Network (aerial) Select the connection method based on your LAN (Local Area Network) environment. Connect the supplied FM wire antenna The following illustrations are configuration (aerial) to the receiver as illustrated below. examples of a home network with the Before connecting the antenna (aerial), be receiver and a server.
Page 44 When using wireless LAN connection Internet Modem Router Server (computer, etc.) Note • Audio playback on a server may occasionally be interrupted if you use a wireless connection. • When using a wireless connection, stand up both wireless LAN antennas for better performance.
Page 45: Preparing The Receiver
Connect the AC power cord Preparing the Receiver (mains lead) to a wall outlet. Before connecting the AC power cord (mains lead), be sure to make Insert batteries into the remote connections for speakers and the other control (page 6). devices.
Page 46: Setting Up The Receiver Using The Easy Setup
If the Easy Setup screen does not appear Setting up the Receiver or you want to display the Easy Setup screen manually, you can display it by using the Easy Setup pressing HOME, then select [Setup] – [Easy Setup]. When you turn on the receiver for the first Setup Easy Setup time or after the receiver is initialized, the...
Page 47 • Confirm the subwoofer setup To cancel Auto Calibration – Before using a subwoofer, turn on the The Auto Calibration function will be canceled subwoofer and turn up the volume. Turn when you perform the following operations, the LEVEL to just before the mid-point. etc.
Page 48: Listening/Watching
Select the device you want to Listening/Watching play and start playback. When you select an input other than Playing AV devices/ the external input, such as [FM TUNER], follow the instructions on the TV screen. Listening to FM radio For details on operation, visit the Help Guide.
Page 49: Using The Multi-Zone Features
Setting up Zone 2 and Zone 3 Using the Multi-Zone Features Connect TV, amplifier or speaker in each zone (page 37, 38). What you can do with the Multi- Zone features Turn on the amplifier and TV in Zone 2, or the amplifier in Zone The Multi-Zone features allow you to enjoy movies and audio of devices connected to the receiver in another room.
Page 50 Selectable input and functional Adjust the volume. restriction in Zone 2 and Zone 3 When watching/listening to the device in Zone 2 Input Zone 2 Zone 3 Adjust the volume on the connected 1), 3)  GAME — device (TV or amplifier/receiver). 1), 3) ...
Page 51: Enjoying Sound Effects
Press / to select the sound Select [Sound Effects] – field you want, then press [360 Spatial Sound Mapping], Sony recommends selecting a sound and then set to [On]. field labeled [MOVIE] for movies and a sound field labeled [MUSIC] for music.
Page 52 Relations between sound fields and speaker outputs The list below shows which speaker outputs sound when a certain sound field is selected. 2-channel content Surround Display Front Center Surround Height Sound field Center back Subwoofer panel speakers speaker speakers speakers speaker speakers 2ch Stereo...
Page 53 Mult-channel content Surround Display Front Center Surround Height Sound field Center back Subwoofer panel speakers speaker speakers speakers speaker speakers 2ch Stereo 2CH STEREO — — — — — — Multi Stereo MULTI ST.       2CH/ Direct DIRECT...
Page 54 Selectable sound fields and their effects Sound field Display panel Effects of the sound field Plays back 2-channel audio signals without adding any surround effects. Monaural and multi-channel audio signals are output after being converted into a 2-channel signal. 2ch Stereo 2CH STEREO This sound field is best suited for playing back audio signals as they are from two front speakers only, without...
Page 55: Listening With Bluetooth Headphones/ Speakers
Press one of the input buttons Listening with to select the input you want. BLUETOOTH headphones/ The sound is output from the BLUETOOTH headphones/speakers. No speakers sound is output from the receiver. Press HOME. Adjust the volume of the BLUETOOTH headphones/ The home menu is displayed on the TV screen.
Page 56: What You Can Do With Network Features
Spotify. Go to spotify.com/ connect to learn how. Sony | Music Center  You can control your receiver wirelessly using the “Sony | Music Center” app. AirPlay  This receiver supports AirPlay. You can enjoy audio content from an iPhone/iPad/iPod...
Page 57: Additional Information
Reverting to the factory Additional Information default settings Saving power If the receiver still does not operate properly, reset the receiver as follows. You can save power by setting up the receiver as follows: Press HOME. – Set [Standby Through] to [Off] in the [HDMI Settings] menu.
Page 58: Updating The Software
[Auto Update] to [Off]. For details, visit the Help Guide. • If the update of Sony wireless rear speakers/ subwoofer (not supplied) does not work, move them closer to the receiver and update them.
Page 59: Troubleshooting
• Try pressing the input button on the remote control or turning INPUT SELECTOR on the Sony support site. receiver to select the input to which you Sony support site provides latest want to watch. support information and Frequently • Set your TV to the appropriate input mode.
Page 60 • Be sure to use a Premium High Speed The home menu does not appear on the TV HDMI Cable with Ethernet, which supports screen. bandwidths up to 18 Gbps. For video • The home menu can only be used when signals that require a high bandwidth such you connect the TV to the HDMI OUT jack as 4K/120p, 8K, etc., be sure to use an Ultra...
Page 61 • Try pressing the input button on the remote No sound is heard from the wireless speaker control or turning INPUT SELECTOR on the (not supplied). receiver to select the input to which you • During DVD-Audio or SA-CD playback, want to watch.
Page 62 There is a time gap between the visual • When a BLUETOOTH device is connected display on the TV and the audio output from and [Bluetooth Mode] is set to the speaker connected to the receiver. [Transmitter], or a headphone is connected, •...
Page 63 Microphone or microphone stand may be (mains lead) and turn on the receiver. If the misaligned. Return to the correct position problem persists, consult your nearest Sony and try again. If noisy, measure with as little dealer. surrounding noise as possible.
Page 64: Precautions
Error 38 Precautions It wasn’t possible to measure correctly. Move the speaker or microphone position a little and try again. If noisy, measure with as little On safety surrounding noise as possible. Should any solid object or liquid fall into the cabinet, unplug the receiver and have Warning 40 it checked by qualified personnel before...
Page 65 On placement On Internet connection • Do not install the appliance in a confined When connecting the receiver to the Internet, space, such as a bookcase. use the router (ADSL modem or optical line • Place the receiver in a location with termination device with the router function adequate ventilation to prevent heat supplied with the Internet provider, or Wi-Fi...
Page 66 Microsoft Corporation. Use BLUETOOTH technology. or distribution of such technology outside of • Sony shall not be held liable in any way for damages or other loss resulting from information this product is prohibited without a license...
Page 67 909 kbps (88.2/44.1 kHz) is selected • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Group Corporation and its subsidiaries is under license. • The terms HDMI™, HDMI High-Definition...
Page 68: Specifications
Equalizer Specifications Gain levels ±10 dB, 1 dB step AUDIO POWER SPECIFICATIONS INPUT SHORT (with sound field and equalizer bypassed). Weighted network, input level. POWER OUTPUT AND TOTAL HARMONIC DISTORTION FM tuner section (USA Models Only): Tuning range With 6 ohm loads, both channels driven, 87.5 MHz –...
Page 69 Network section Wireless Transmitter/Receiver Section Ethernet LAN Communication system 100BASE-TX Wireless Sound Specification version 4.0 Wireless LAN Frequency band Compatible standards: 5 GHz IEEE 802.11 a/b/g/n/ac Modulation method Security: OFDM WPA/WPA2-PSK Radio frequency: General 2.4 GHz, 5 GHz Power requirements 120 V AC, 60 Hz BLUETOOTH section Power consumption Communication system...
Page 70 Playable types of audio files Codec Extension MP3 (MPEG-1 Audio Layer III) .mp3 MPEG-H .mp4 AAC/HE-AAC .m4a, .aac , .mp4 , .3gp WMA9 Standard .wma LPCM .wav FLAC .flac .dsf DSDIFF .dff 1), 3) AIFF .aiff, .aif ALAC .m4a Vorbis .ogg Monkey’s Audio .ape...
Page 71 Supported digital audio formats The digital audio formats that this receiver can decode depend on the digital audio output jacks of the connected device. This receiver supports the following audio formats. The words in brackets are those indicated on the display panel. Digital audio format Maximum number of Connection with the...
Page 72 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Use this Help Guide when you have any questions on how to use the receiver/amplifier. This Help Guide mainly describes the procedures for using the remote control. You can also use the controls on the receiver/amplifier if they have the same or similar names as those on the remote control.
Page 73 Connecting 5.1-channel speaker system with Zone 3 connection Connecting 5.1-channel speaker system with bi-amplifier connection Connecting 5.1-channel speaker system with front B speaker connection Connecting Sony wireless rear speakers/subwoofer 3. Connecting a TV Notes on TV connection Connecting a TV compatible with the eARC or ARC function using an HDMI jack...
Page 74 When the eARC/ARC-compatible HDMI input jack of your TV is incompatible with 8K video input Connecting devices with jacks other than HDMI jacks Connecting a USB device Connecting the antenna (aerial) (for US, Canadian, and Asia-Pacific models only) 5. Connecting to the network Connecting a LAN cable (for wired LAN connections only) Connecting the unit to the network using the wireless LAN antenna (for wireless LAN connections only) 6.
Page 75 Connecting the unit to the network using the wireless LAN antenna (for wireless LAN connections only) Setting up a wireless LAN connection Setting up a Wireless Network Connection Using Sony | Music Center Playing music with the TIDAL App Playing Music from Other Streaming Services...
Page 76 Playing music on the Sonos devices Using the Multi-Zone Features Overview of multi-zone features What you can do with multi-zone features Available input sources for each zone Enjoying video and sound on the amplifier and TV in Zone 2 Connecting another amplifier or TV in Zone 2 Setting up Zone 2 (Zone2 Settings) Enjoying video and sound on the amplifier and TV in Zone 2 Enjoying sound from speakers located in another room (Zone 3)
Page 77 Operating the unit by Interlocking with a TV (Control for HDMI function) Operating the unit by interlocking with a TV compatible with the “BRAVIA” Sync function Enjoying video and sound with desired way of use Switching the TVs that output the HDMI video signals Switching between digital and analog audio (Input Mode) Using other digital audio input jacks (Input Assign) Saving and recalling various settings (Custom Preset)
Page 78 Selecting the playback quality of the wireless speaker (Wireless Playback Quality) Checking the software version of the wireless speakers (Software Version) Outputting the center speaker part of the sound from the TV speakers (TV Center Speaker Mode) Lifting up the sound of the center speaker (Center Speaker Lift Up) Enjoying more natural sound with speakers installed in the ceiling (In-Ceiling Speaker Mode) Manual Speaker Settings Outputting a test tone from each speaker (Test Tone)
Page 79 Turning off the unit and connected devices simultaneously with the TV (System Power Off function) (Standby Linked to TV) Enjoying content of a connected device without turning on the unit (Standby Through) Enabling the eARC/ARC function (Audio Return Channel) Setting the HDMI audio signal output of connected devices (Audio Out) Setting the level of the subwoofer (Subwoofer Level) Selecting the method to use the HDMI OUT B jack (HDMI OUT B Mode) Check information about the monitor connected via HDMI (Monitor Information)
Page 80 Setting the BLUETOOTH sound quality (Wireless Playback Quality) System Settings Selecting the language used on the menu of the unit displayed on the TV (Language) Displaying the information on the screen when any settings are changed (Auto Display) Turning on the unit via the network or BLUETOOTH function (Network/Bluetooth Standby) Setting the unit to switch to standby mode automatically (Auto Standby) Switching the brightness of the display panel (Dimmer) Assigning a name to the unit (Device Name Setting)
Page 81 The unit does not turn on even when the TV is turned on. The unit turns off when the TV is turned off. The unit does not turn off even when the TV is turned off. Image No image appears on the TV screen. 4K or 8K content cannot be displayed at the same resolution as the source.
Page 82 A test tone is not output from the speakers. A test tone is output from a different speaker than the speaker displayed on the TV screen. No sound is output to the TV from the connected HDMI device when the unit is in standby mode. TV sound cannot be heard from the speakers connected to the unit.
Page 83 The sound of your BLUETOOTH device cannot be heard on the unit. Severe humming or noise. Cannot control the unit using a Sony | Music Center device. “BRAVIA” Sync (Control for HDMI) The Control for HDMI function does not work properly.
Page 84 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Front panel (power) Power indicator Green: The unit is turned on. Amber: The unit is in standby mode, and you have set one of the following: [Control for HDMI] or [Network/Bluetooth Standby] is set to [On].
Page 85 The indicator above the button lights up when the Pure Direct function is activated. MASTER VOLUME INPUT SELECTOR (USB) port Connect a USB device here. CALIBRATION MIC jack PHONES jack Connect headphones here. Related Topic Indicators on the display panel Turning on the unit Selecting the front speakers 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 86 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Indicators on the display panel US, Canadian, and Asia-Pacific models Other countries and region models D.C.A.C. Lights up when the measurement results of the D.C.A.C. IX (Digital Cinema Auto Calibration) function are applied.
Page 87 [eARC] lights up when eARC signals are input through the HDMI OUT A (TV) jack, and [ARC] for ARC signals. COAX Digital signals are input through the COAXIAL IN SA-CD/CD jack. Digital signals are input through the OPTICAL IN TV jack. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 88 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Rear panel US, Canadian, and Asia-Pacific models Other countries and region models COAXIAL IN SA-CD/CD jack Wireless LAN antenna...
Page 89 Connecting a TV compatible with the eARC or ARC function using an HDMI jack Connecting a TV incompatible with the eARC and ARC functions using an HDMI jack Connecting a TV with jacks other than HDMI jacks 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 90 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Remote control Use the supplied remote control to operate this unit. US, Canadian, and Asia-Pacific models...
Page 91 Other countries and region models (power) (MAIN, ZONE 2, ZONE 3) Turns the unit in the main zone, Zone 2 or Zone 3 on or sets it to standby mode. MAIN, ZONE 2, ZONE 3 Selects the location to be controlled. For details, see “Remote control buttons that can be operated for each zone.”...
Page 92 (volume) + buttons have tactile dots. Use the tactile dots as reference when operating the unit. Note The above explanations are intended to serve as examples. Depending on the model of your connected device, some functions explained in this section may not work with the supplied remote control. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 93 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Remote control buttons that can be operated for each zone Main Buttons Zone 2 Zone 3 zone (power) buttons Operable Operable Operable ZONE 3, ZONE 2, MAIN Zone select buttons...
Page 94 TEST Operable Operable Operable AUTO CAL. Operable Operable Operable You can operate the menu on the TV screen in the main zone. PRESET – and PRESET + are for US, Canadian, and Asia-Pacific models only. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 95 When you connect the TV to the MONITOR OUT jack, the home menu of this unit is not displayed on the TV screen. To operate this unit using the menu on the TV screen, connect the TV to the HDMI OUT A (TV) or HDMI OUT B/ZONE 2 jacks. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 96 The unit does not play coded files such as DRM. The unit cannot recognize a file/folder depending on the name/metadata. Some USB devices may not work with this unit. The unit can recognize Mass Storage Class (MSC) devices. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 97 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Digital audio formats supported by the unit The digital audio formats that this unit can decode depend on the digital audio output jacks of the connected device. This unit supports the following audio formats. The words in brackets are those indicated on the display panel.
Page 99 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Video formats supported by the unit This unit supports the following video formats. 8K 60/50/30/25/24 Hz 4K 120/100/60/50/30/25/24 Hz 1080p 120/100/60/50/30/24 Hz 1080i 60/50 Hz 720p 60/50/30/24 Hz 576p 50 Hz 480p 60 Hz The details of the video formats are as follows.
Page 100 Format type Resolution Frame rate Color space Color depth RGB 4:4:4 Enhanced format 1920 x 1080p 120/119.88/100 Hz 10/12 bit YCbCr 4:4:4 Standard format 4096 x 2160p 60/59.94/50 Hz YCbCr 4:2:0 8 bit RGB 4:4:4 Standard format 4096 x 2160p 24/23.98 Hz 8 bit YCbCr 4:4:4...
Page 101 In the case of the following signals, OPTIONS does not work. In addition, the on-screen display (OSD) is not displayed. Signal with a resolution of 4096 x 2160p 3D signals of the side-by-side or top-and-bottom split method VRR signals and compressed video signals 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 102 If you want to connect several digital devices, but cannot find an unused input In this case, reassign the input jacks. Related Topic About HDMI connections Using other digital audio input jacks (Input Assign) Setting HDMI signal formats (HDMI Signal Format) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 103 About HDMI connections High-Definition Multimedia Interface (HDMI) is an interface that transmits video and audio signals in digital format. Connecting Sony “BRAVIA” Sync-compatible devices using HDMI cables simplifies operations. HDMI features Digital audio signals transmitted by HDMI can be output from the speakers connected to the unit. This signal supports Dolby Digital, DTS, DSD, and Linear PCM.
Page 105 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Speaker installation example You can connect up to 7 speakers and 2 subwoofers to this unit. Place the speakers and subwoofers according to the speaker system of your preference. Hint As the subwoofer (SW) does not emit highly directional signals, you can place it wherever you want.
Page 106 Front height left Produces vertical sound effects from Front height left channel. speaker Front height right Produces vertical sound effects from Front height right channel. speaker Related Topic Installing 5.1-channel speaker system with Zone 3 connection 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 107 This unit allows you to connect Sony wireless rear speakers and a Sony subwoofer. When your Sony TV has the S-CENTER SPEAKER IN jack, you can output the center part of the unit sound from the TV speaker. By setting [SpeakerRelocation / PhantomSurroundBack] to [Type A] or [Type B] in the [Audio Settings] menu, you can enjoy a surround effect equivalent to up to 7.1.2 channels in terms of hearing.
Page 109 (0 degrees) Front speakers: 30° Surround speakers: 100° - 120° Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Related Topic Speaker installation example Connecting 5.1-channel speaker system 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 110 Surround speakers: 100° - 120° Speaker spacings: Same angle Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Related Topic Speaker installation example Connecting 7.1-channel speaker system using surround back speakers 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 111 Top middle speakers: 70° - 110° Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Related Topic Speaker installation example Connecting 5.1.2-channel speaker system using top middle speakers 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 112 Surround speakers: 100° - 120° Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Related Topic Speaker installation example Connecting 5.1.2-channel speaker system using front Dolby Atmos enabled speakers 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 113 Front speakers: 30° Surround speakers: 100-120° Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Related Topic Speaker installation example Connecting 5.1-channel speaker system with Zone 3 connection 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 114 Front speakers: 30° Surround speakers: 100° - 120° Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Related Topic Speaker installation example Connecting 5.1-channel speaker system with bi-amplifier connection 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 115 Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. Related Topic Speaker installation example Connecting 5.1-channel speaker system with front B speaker connection Selecting the front speakers 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 116 Be sure not remove too much of the speaker cable sleeves, so as to prevent the wires of the speaker cables from touching each other. Connect speaker cables properly with the polarities (+/–) matched between the unit and the speakers. Improper connection may result in fatal damage to the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 117 If you have two subwoofers, you can connect them to both SUBWOOFER OUT jacks. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 118 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting 5.1-channel speaker system Connect each speaker to the SPEAKERS terminals on the rear of the unit. Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Page 119 Notes on connecting cables How to connect speaker cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 120 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting 7.1-channel speaker system using surround back speakers Connect each speaker to the SPEAKERS terminals on the rear of the unit. Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Page 121 Notes on connecting cables How to connect speaker cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 122 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting 5.1.2-channel speaker system using top middle speakers Connect each speaker to the SPEAKERS terminals on the rear of the unit. Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Page 123 Notes on connecting cables How to connect speaker cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 124 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting 5.1.2-channel speaker system using front Dolby Atmos enabled speakers Connect each speaker to the SPEAKERS terminals on the rear of the unit. Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Page 125 Notes on connecting cables How to connect speaker cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 126 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting 5.1-channel speaker system with Zone 3 connection Connect each speaker to the SPEAKERS terminals on the rear of the unit. Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Page 127 Installing 5.1-channel speaker system with Zone 3 connection Connecting 7.1-channel speaker system using surround back speakers Assigning the surround back speaker terminals (Surround Back Speaker Assign) Enjoying sound using speakers in Zone 3 Notes on connecting cables How to connect speaker cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 128 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting 5.1-channel speaker system with bi-amplifier connection You can enhance the sound quality of the front speakers by separately connecting the built-in amplifiers to tweeters and woofers in a bi-amplifier configuration.
Page 129 Speaker installation example Installing 5.1-channel speaker system with bi-amplifier connection Selecting the speaker pattern (Speaker Pattern) Assigning the surround back speaker terminals (Surround Back Speaker Assign) Notes on connecting cables How to connect speaker cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 130 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting 5.1-channel speaker system with front B speaker connection Connect each speaker to the SPEAKERS terminals on the rear of the unit. If you are not using surround back speakers or height/overhead speakers, you can connect additional front B speakers to the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 3) terminals.
Page 131 Speaker installation example Installing 5.1-channel speaker system with front B speaker connection Selecting the speaker pattern (Speaker Pattern) Assigning the surround back speaker terminals (Surround Back Speaker Assign) Notes on connecting cables How to connect speaker cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 132 When you connect the wireless rear speaker/subwoofer to the unit for the first time, follow the steps below. Once the Sony wireless rear speaker/subwoofer turns on, it will automatically connect to the unit. Select [Setup] - [Speaker Settings] from the home menu.
Page 133 Note If you change the [RF Channel] setting from [Off] to [On], it may take 1 minute to reconnect. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 134 When you connect a TV compatible with the eARC or ARC function, turn on the eARC or ARC function and connect the eARC/ARC-compatible HDMI input jack of your TV to HDMI OUT A (TV) jack of the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 135 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting a TV compatible with the eARC or ARC function using an HDMI jack Connect a TV to the HDMI OUT A (TV) jack. You can listen to TV sound from the speakers connected to the unit simply by connecting one HDMI cable. The HDMI cable outputs audio/video signals to the TV and inputs audio signals from the TV at the same time.
Page 136 Controlling HDMI devices (Control for HDMI) Enjoying content of a connected device without turning on the unit (Standby Through) Setting the HDMI audio signal output of connected devices (Audio Out) Setting HDMI signal formats (HDMI Signal Format) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 137 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting a TV incompatible with the eARC and ARC functions using an HDMI jack Connect a TV to the HDMI OUT A (TV) jack. When you connect the unit to a TV using the HDMI cable ( ), the unit can output audio and video signals to the TV.
Page 138 Connecting with an HDMI cable and an audio cable...
Page 139 Optical digital cable (not supplied) HDMI cable (not supplied) Audio cable (not supplied) Note Be sure to use a Premium High Speed HDMI Cable with Ethernet, which supports bandwidths up to 18 Gbps. For video signals that require a high bandwidth such as 8K, 4K/120p, etc., be sure to use an Ultra High Speed HDMI Cable that supports bandwidths up to 48 Gbps.
Page 140 Controlling HDMI devices (Control for HDMI) Enjoying content of a connected device without turning on the unit (Standby Through) Setting the HDMI audio signal output of connected devices (Audio Out) Setting HDMI signal formats (HDMI Signal Format) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 141 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting a TV with jacks other than HDMI jacks Connect a TV to the MONITOR OUT jack. In addition to connecting with the video cable ( ), it is necessary to connect with an optical digital cable ( ) or audio cable ( Be sure to disconnect the AC power cord (mains lead) before connecting cables.
Page 142 When connecting a TV to the unit via the AUDIO IN TV jacks of the unit, set the sound output jack of the TV to “Fixed” if it can be switched between “Fixed” or “Variable.” Related Topic Notes on TV connection About input/output of video signals Notes on connecting cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 143 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting a TV and a projector using an HDMI jack Connect a TV to the HDMI OUT A (TV) jack and connect a projector to the HDMI OUT B/ZONE 2 jack.
Page 144 Enjoying content of a connected device without turning on the unit (Standby Through) Setting the HDMI audio signal output of connected devices (Audio Out) Selecting the method to use the HDMI OUT B jack (HDMI OUT B Mode) Setting HDMI signal formats (HDMI Signal Format) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 145 Hint If you want to play the signal via the optical digital audio cable or audio cable even if the TV is eARC-compatible or ARC-compatible, “Setting TV audio output (when not using the eARC/ARC function).” 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 146 Set [Input Mode] according to how you connect the TV. For details on the setting, see “Switching between digital and analog audio (Input Mode).” Note Be sure to minimize the volume of the TV or activate the muting function of the TV. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 147 Hint Some Sony TVs have an S-CENTER SPEAKER IN jack. For details, see the operating instructions of your TV. If you connect your TV to the S-CENTER OUT jack of the unit, press HOME, select [Setup] – [Speaker Settings] – [TV/Screen Center Settings] –...
Page 148 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting devices with HDMI jacks Before connecting cables, be sure to disconnect the AC power cord (mains lead). Connect to the HDMI jack compatible with the video signal of your device.
Page 149 “When the eARC/ARC-compatible HDMI input jack of your TV is incompatible with 8K video input.” Related Topic About input/output of video signals Notes on connecting cables About HDMI connections Changing the name for each input (Name) Connecting devices with jacks other than HDMI jacks 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 150 Connect the AV device to the HDMI input jack that supports 8K video format on the TV with an HDMI cable (not supplied). Enable the eARC/ARC function on the TV. The unit HDMI input jack that supports 8K video input HDMI cable (not supplied) Audio device 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 151 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting devices with jacks other than HDMI jacks Connect each device to the video jack and audio jack on the rear panel of the unit. Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Page 152 When connecting devices with video cables and audio cables...
Page 153 Audio cable (not supplied) Video cable (not supplied) Coaxial digital cable (not supplied) To connect a turntable that only has a PHONO output jack, you need to connect a phono equalizer (not supplied) between the turntable and this unit. Note The analog video signals input from the VIDEO IN jacks are output from the MONITOR OUT jack only.
Page 154 You can rename each input so that the name can be displayed on the display panel of the unit. For details, see “Changing the name for each input (Name).” Related Topic About input/output of video signals Notes on connecting cables Using other digital audio input jacks (Input Assign) Changing the name for each input (Name) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 155 Connect a USB device to the (USB) port. USB device Note iPhone/iPad/iPod touch playback via (USB) port is not possible. Related Topic Enjoying music stored on a USB device USB specifications and compatible USB devices Notes on USB devices 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 156 Be sure to fully extend the FM wire antenna (aerial). After connecting the FM wire antenna (aerial), keep it as horizontal as possible. Related Topic Listening to FM radio (for US, Canadian, and Asia-Pacific models only) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 157 Some flat-type LAN cables are easily affected by noise. We recommend using a Category 7 cable. Related Topic Notes on connecting cables Setting up a wired LAN connection Assigning a name to the unit (Device Name Setting) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 158 When using a wireless connection, stand up both wireless LAN antennas for better performance. Server (computer, etc.) Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. Related Topic Assigning a name to the unit (Device Name Setting) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 159 If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. When the unit no longer responds to the remote control, replace both of the batteries with new ones. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 160 Insert the mic stand pillar all the way into the mic stand bottom. Mic stand pillar Mic stand bottom Insert the mic stand top all the way into the mic stand pillar. Mic stand top Mic stand pillar 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 161 Fully insert the plug of the calibration microphone into the CALIBRATION MIC jack. If the calibration microphone is not firmly connected, it may not be possible to measure correctly. Install the calibration microphone horizontally so that L (left) and R (right) are at the same height. Related Topic Assembling the calibration mic stand 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 162 [HELLO] appears on the display panel and then switches to [PLEASEWAIT]. You cannot turn on the unit until the [PLEASEWAIT] display disappears. Press (power) to turn on the unit. You can also turn on the unit using (power) on the remote control. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 163 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Setting up the unit using the [Easy Setup] When you turn on the unit for the first time or after the unit is initialized, the Easy Setup screen appears on the TV screen.
Page 164 What you can do with Auto Calibration Before you perform Auto Calibration Connecting the calibration microphone Selecting the front speakers Auto Calibration operation Checking Auto Calibration results Setting up a wired LAN connection Setting up a wireless LAN connection 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 165 The D.C.A.C. IX (Digital Cinema Auto Calibration) is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference using [Test Tone] in [Manual Speaker Settings] under [Speaker Settings]. Related Topic Outputting a test tone from each speaker (Test Tone) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 166 Depending on the characteristics of the subwoofer you are using, the setup distance value may be different from the actual position. Related Topic Connecting the calibration microphone Selecting the speaker pattern (Speaker Pattern) Assigning the surround back speaker terminals (Surround Back Speaker Assign) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 167 Press the input buttons on the remote control or turn the INPUT SELECTOR on the unit. Press HOME, AMP MENU, HDMI OUT or (muting) on the remote control. Press SPEAKERS on the unit. Change the volume level. Connect the headphones. Related Topic Connecting the calibration microphone 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 168 To select [SPB] or [SPA+B], set the assignment for the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 3) terminals to [Front B] by using [Manual Speaker Settings] - [Surround Back Speaker Assign] in the [Speaker Settings] menu. Note This setting is not available when headphones are connected. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 169 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Checking Auto Calibration results To check error codes or warning messages received in [Auto Calibration], proceed with the following steps: If an error code appears Check the error and perform Auto Calibration again.
Page 170 Related Topic List of messages after Auto Calibration measurements 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 171 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Content that can be played on the unit This topic explains the operations you can use to enjoy movies and music with this unit. For example, you can use multiple devices with this unit as shown below.
Page 172 As the unit is equipped with an HDCP 2.3-compatible HDMI jack, you can also enjoy 4K/8K content via streaming services, satellite broadcasts, etc. Playing AV devices Related Topic What you can do with network features 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 173 When [OPTIONS] appears in the lower left portion of the menu on the TV screen, you can display the function list by pressing OPTIONS and selecting a related function. To return to the previous screen, press BACK. To exit the menu, press HOME to display the home menu, then press HOME again. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 174 During BLUETOOTH TX mode: BLUETOOTH device name - Sound field currently applied - Volume level - Stream information - Input you are selecting Note Characters or marks in some languages may not be displayed. Related Topic Indicators on the display panel 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 175 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Playing AV devices You can connect AV devices to the unit to enjoy a wide range of content such as movies and audio. Turn on the device you want to play.
Page 176 Press and hold one of the (volume) +/– buttons. To adjust the volume, perform the following: Turn the MASTER VOLUME knob on the unit slowly. Press one of the (volume) +/– buttons and release it immediately. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 177 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Enjoying music stored on a USB device You can enjoy music from a USB device by connecting it to the (USB) port on the unit. Select [Listen] - [USB] from the home menu.
Page 179 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 USB specifications and compatible USB devices Playable types of audio files (*1) MP3 (MPEG-1 Audio Layer III): .mp3 MPEG-H: .mp4 AAC/HE-AAC: .m4a, .aac, .mp4, .3gp WMA9 Standard: .wma LPCM: .wav FLAC: .flac...
Page 180 When formatting a USB device, be sure to format using the model itself or the dedicated formatting software for that model. When connecting a USB device to the unit, be sure to connect after the display “Creating Library” or “Creating Database” on the USB device has disappeared. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 181 If a folder that has no files is selected, [There is no playable file.] appears. When playing a very long track or a track with a large file size, some operations may cause delays in playback. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 182 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Listening to FM radio (for US, Canadian, and Asia-Pacific models only) You can listen to FM broadcasts through the built-in tuner. Be sure that the TV and FM antenna (aerial) is connected to the unit before performing this operation.
Page 183 Presetting FM radio stations (Preset Memory) (for US, Canadian, and Asia-Pacific models only) Naming preset stations (Preset Name Input) (for US, Canadian, and Asia-Pacific models only) The FM stereo reception is poor (for US, Canadian, and Asia-Pacific models only). 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 184 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Presetting FM radio stations (Preset Memory) (for US, Canadian, and Asia-Pacific models only) You can store up to 30 FM stations as your favorite stations. Select [Listen] - [FM TUNER] from the home menu.
Page 185 On the FM screen, press (right) to move the highlight to the preset list and select the station you want to listen to. Related Topic Naming preset stations (Preset Name Input) (for US, Canadian, and Asia-Pacific models only) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 186 Press BACK before Step 6. Note Some letters that can be displayed on the TV screen cannot be displayed on the display panel. Related Topic Presetting FM radio stations (Preset Memory) (for US, Canadian, and Asia-Pacific models only) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 187 Make sure you have entered the right frequency. If not, repeat steps 3 and 4. If you still cannot tune to a station, the frequency may not be in use in your area. Hint The tuning scale for direct tuning is shown below: US and Canadian models: 100 kHz Other countries and region models: 50 kHz 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 188 Some letters that can be displayed on the TV screen cannot be displayed on the display panel. Hint You can check the frequency while a Program Service name is displayed by pressing DISPLAY MODE on the unit repeatedly. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 189 BLUETOOTH receiver closer to this unit. Listening with BLUETOOTH headphones/speakers (Pairing operation) For details about the compatible BLUETOOTH version and profiles of this unit, see “Compatible BLUETOOTH version and profiles.” 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 190 BLUETOOTH device and this unit. So the response to the operation may be delayed, or there may be a delay before the start of playback unlike the case of playback on the BLUETOOTH device itself. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 191 This unit is displayed as [STR-AN1000]/[TA-AN1000]. Select [STR-AN1000]/[TA-AN1000] on the BLUETOOTH device display. If [STR-AN1000]/[TA-AN1000] is not displayed, repeat this process from step 1. When the BLUETOOTH connection is established, the paired device name appears and [BT] lights up on the display panel.
Page 192 Related Topic Controlling a BLUETOOTH device using the remote control 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 193 These operations may not work with certain BLUETOOTH devices. Also, the actual operation may differ depending on the BLUETOOTH device you are using. The BLUETOOTH TX/RX on the remote control does not work when the BLUETOOTH function is already activated or when [Bluetooth Mode] is set to [Off]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 194 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Listening with BLUETOOTH headphones/speakers (Pairing operation) You can listen to audio sources playing via this unit by using BLUETOOTH headphones/speakers. Select [Setup] - [Bluetooth Settings] from the home menu. Set [Bluetooth Mode] to [Transmitter].
Page 195 If the BLUETOOTH device in step 3 is the most recently connected device, you can connect it to this unit automatically by simply pressing BLUETOOTH TX/RX on the remote control. In this case, you do not need to perform step 4. Related Topic Selecting the BLUETOOTH mode (Bluetooth Mode) Checking the BLUETOOTH device list (Device List) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 196 Using Spotify Sony | Music Center You can control your unit wirelessly using the “Sony | Music Center” app. Using Sony | Music Center AirPlay This unit supports AirPlay. You can enjoy audio content from an iPhone/iPad/iPod touch or your iTunes Library.
Page 197 You can play Sonos sound source/music content on the unit using the Sonos app. Playing music on the Sonos devices Related Topic Enjoying audio content from iTunes or an iPhone/iPad/iPod touch via the network (AirPlay) Using Spotify 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 198 If you are not sure whether an in-wall access point can be used as a router, check with your apartment manager or Internet service provider, etc. LAN port on the wall LAN cable Router Wireless LAN 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 199 Some flat-type LAN cables are easily affected by noise. We recommend using a Category 7 cable. Related Topic Notes on connecting cables Setting up a wired LAN connection Assigning a name to the unit (Device Name Setting) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 200 When the unit is successfully connected to the network, [NETWORK] lights up on the display panel of the unit. Hint See [Network Connection Status] in the [Network Settings] menu when checking the network settings. Related Topic Connecting a LAN cable (for wired LAN connections only) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 201 When using a wireless connection, stand up both wireless LAN antennas for better performance. Server (computer, etc.) Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. Related Topic Assigning a name to the unit (Device Name Setting) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 202 (SSID), wireless LAN router security method, and IP address. Hint See [Network Connection Status] in the [Network Settings] menu when checking the network settings. Related Topic Connecting the unit to the network using the wireless LAN antenna (for wireless LAN connections only) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 203 Setting up a Wireless Network Connection Using Sony | Music Center The Sony | Music Center app allows you to connect the unit to the same network with your mobile device. For details, see the Help in the Sony | Music Center app or visit the following URL.
Page 204 Home). When you select either 2-channel audio or 360 Reality Audio compatible music, [360RAcast] appears. Note With Sony | Music Center, you can check the streaming services that provide 360 Reality Audio compatible music. On Sony | Music Center, select the unit and then select [Settings] - [About 360 Reality Audio] - [Next].
Page 205 This unit is compatible with a Google Assistant-enabled device with Chromecast built-in so you can control your music with your voice. Simply link the unit to the Google Home app on your mobile device. For details, refer to the Google Home app. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 206 Depending on the streaming service, you need to subscribe to the premium plan to play 360 Reality Audio compatible music. Note With Sony | Music Center, check 360 Reality Audio delivery streaming services supported by the unit. On Sony | Music Center, select the unit and then select [Settings] - [About 360 Reality Audio] - [Next].
Page 207 If [Network/Bluetooth Standby] is set to [On], you can play music quickly even when the unit is in standby mode. An image such as an album cover appears in the playback screen if the played content supports the feature. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 208 Operate by following the Sony | Music Center screen. Note Use Sony | Music Center of the latest version. If you cannot connect the unit and a BLUETOOTH device via the BLUETOOTH function, uninstall Sony | Music Center and try to connect via the BLUETOOTH function again.
Page 209 If you add the unit to the Home app on the iOS device, you can stream music to the unit by talking to Siri. Note Since the unit does not have a microphone, you cannot talk to the unit to operate it. Not all features of Siri are available on the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 210 Listen to music on a PC by using Sony | Music Center. You can play music files stored on the PC by operating Sony | Music Center that is installed to a mobile device such as a smartphone or tablet. For details of Sony | Music Center, refer to the following URL.
Page 211 Setting up a wireless LAN connection Setting up a Wireless Network Connection Using Sony | Music Center 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 212 The unit does not play coded files such as DRM and Lossless. The unit can recognize the following files or folders stored in the home network server: up to folders in the 19th layer up to 999 files/folders in a single layer 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 213 The input source is switched to the one as selected in step 3 and the audio content of the Sonos device is played back at the set volume level and in the selected zone. For information on the operation of Sonos devices and the Sonos App, please visit the Sonos website. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 214 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 What you can do with multi-zone features Enjoying video and sound in two locations ― Zone 2 You can enjoy video and audio in another room by connecting a TV or different AV receiver equipped with an HDMI input jack and located in another room to the HDMI OUT B/ZONE 2 jack.
Page 215 You can also install and use one more unit or amplifier in Zone 3. In this case, connect the amplifier installed in Zone 3 to the AUDIO ZONE 3 OUT jacks of the unit installed in main zone. Note There are restrictions on the audio sources that can be used in Zone 2 or Zone 3. For details, see “Available input sources for each zone.”...
Page 216 Selecting the method to use the HDMI OUT B jack (HDMI OUT B Mode) Enjoying video and sound on the amplifier and TV in Zone 2 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 217 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Available input sources for each zone Available input sources vary depending on the zone you have selected. Available input sources for main zone You can select all input source from every device connected to the unit in the main zone.
Page 218 The video signals input from the VIDEO IN SAT/CATV jack will be output from the MONITOR OUT jack. The video signals input from the VIDEO IN AUX jack will be output from the MONITOR OUT jack. Available input sources for Zone 2 The following input sources are available for Zone 2.
Page 219 If you set [DSD Native] in [Audio Settings] to [On], no audio signals for DSD content from [USB] or [Home Network] are output to the Zone 3 speakers. Related Topic Selecting the method to use the HDMI OUT B jack (HDMI OUT B Mode) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 220 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting another amplifier or TV in Zone 2 HDMI input video/audio signals are output in Zone 2 using the HDMI OUT B/ZONE 2 jack of the unit. Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Page 221 B/ZONE 2 jack as they are, you cannot adjust the volume level on the unit. Adjust the volume on the amplifier/receiver connected to the HDMI OUT B/ZONE 2 jack. For details on selecting the Zone 2 input, see “Enjoying video and sound on the amplifier and TV in Zone 2.” Related Topic Notes on connecting cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 222 Turn on the TV and the unit in the main zone. Select [Setup] - [Zone Settings] from the home menu. Select [Zone2 Settings]. Follow the instructions on the TV screen to make connections and settings. Select [Confirm changes]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 223 Available inputs and functional restrictions in Zone 2 “Available input sources for each zone.” Hint A dedicated App Sony | Music Center enables easier zone operation such as changing the settings or switching the zone inputs from your smartphone or tablet.
Page 224 Related Topic Connecting another amplifier or TV in Zone 2 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 225 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Connecting 5.1-channel speaker system with Zone 3 connection Connect each speaker to the SPEAKERS terminals on the rear of the unit. Before connecting cables, be sure to disconnect the AC power cord (mains lead).
Page 226 Installing 5.1-channel speaker system with Zone 3 connection Connecting 7.1-channel speaker system using surround back speakers Assigning the surround back speaker terminals (Surround Back Speaker Assign) Enjoying sound using speakers in Zone 3 Notes on connecting cables How to connect speaker cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 227 Turn on the TV and the unit in the main zone. Select [Setup] - [Zone Settings] from the home menu. Select [Zone3 Settings]. Follow the instructions on the TV screen to make connections and settings. Select [Confirm changes]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 228 “Available input sources for each zone.” Hint A dedicated App Sony | Music Center enables easier zone operation such as changing the settings or switching the zone inputs from your smartphone or tablet. Related Topic Connecting 5.1-channel speaker system with Zone 3 connection...
Page 230 COAXIAL IN SA-CD/CD jack, or the HDMI IN jacks, select the target input for the main zone, and then select [SOURCE] for Zone 3. If you set [DSD Native] in [Audio Settings] to [On], no audio signals for DSD content from [USB] or [Home Network] are output to the Zone 3 speakers. Related Topic Notes on connecting cables 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 231 Turn on the TV and the unit in the main zone. Select [Setup] - [Zone Settings] from the home menu. Select [Zone3 Settings]. Follow the instructions on the TV screen to make connections and settings. Select [Confirm changes]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 232 Available inputs and functional restrictions in Zone 3 “Available input sources for each zone.” Hint A dedicated App Sony | Music Center enables easier zone operation such as changing the settings or switching the zone inputs from your smartphone or tablet. Related Topic...
Page 233 Connecting another amplifier in Zone 3 Setting the volume control for Zone 3 (Zone3 Line Out) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 234 You can also press 360SSM on the remote control to activate or deactivate the [360 Spatial Sound Mapping] function. You can also select [360 Spatial Sound Mapping] from the [Audio Settings] in the [Setup] menu. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 235 Select [Sound Effects] - [Sound Field] from the home menu. Select the sound field you want. Sony recommends selecting a sound field labeled [MOVIE] for movies and a sound field labeled [MUSIC] for music. For details on each sound field, see “Selectable sound fields and their...
Page 236 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Selectable sound fields and their effects Sound field Display panel Effects of the sound field Plays back 2-channel audio signals without adding any surround effect. Monaural and multichannel audio signals are output after being converted into a 2-channel signal.
Page 237 7.1-channel surround system. The sound level of surround and surround back speakers are adjusted automatically for optimum balance. Atmos is decoded as Dolby TrueHD or Dolby Digital Plus when a sound field other than [Multi Stereo], [A.F.D.] or [Dolby Mode] is selected. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 238 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Relations between sound fields and speaker outputs The list below shows which speaker outputs sound when a certain sound field is selected. 2-channel content Meaning of symbols in the table -: No sound is output.
Page 239 MUSIC ○ ○ ○ ○ ○ ○ Enhancer ENHANCER Note When no sound is heard, check that all the speakers are securely connected to the correct speaker terminals and the correct speaker pattern is selected. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 240 Be sure to use the buttons on the unit to perform this operation. Hold down MUSIC and press (power) on the unit. [S.F.INITIALIZED!] appears on the display panel and all sound fields are reset to their default setting. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 241 Only [Bass] gain and [Treble] gain are available for [Front] when headphones are connected. Hint You can also select [Equalizer] in [Setup] - [Speaker Settings] - [Manual Speaker Settings] from the home menu. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 242 You can also select [In-Ceiling Speaker Mode] from [Speaker Settings] - [TV/Screen Center Settings] in the [Setup] menu. To obtain optimal effects in the listening environment, set [Manual Speaker Settings] - [Height] - [Ceiling] from [Speaker Settings] menu and perform Auto Calibration. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 243 Hint You can also use PURE DIRECT on the remote control or the unit to turn the [Pure Direct] function on or off. You can also select [Pure Direct] from [Audio Settings] in [Setup] menu. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 244 When you select [TV] for the input source, press AMP MENU on the remote control to set this function using the menu on the display panel. Related Topic Operating the unit with the menu on the display panel 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 245 To enable the Control for HDMI function of a TV or Blu-ray Disc player, refer to their operating instructions. If you enable the Control for HDMI (“BRAVIA” sync) function when using a TV manufactured by Sony, the Control for HDMI function of the unit is also enabled automatically.
Page 246 In the Sync Menu of the TV, the unit is recognized as “Tuner” by the TV. Some Sony TVs support the Sync Menu. Refer to the operating instructions of your TV to see if your TV supports the Sync Menu.
Page 247 Operating the unit by interlocking with a TV compatible with the “BRAVIA” Sync function “BRAVIA” Sync is an extended function developed by Sony based on the Control for HDMI function. By connecting “BRAVIA” Sync-compatible devices such as a TV or a Blu-ray Disc player using an HDMI cable, you can control the devices by interlocking them with each other.
Page 248 When [HDMI OUT B Mode] is set to [Zone2], the HDMI signals are output to the Zone 2 even if [HDMI OFF] is selected. Related Topic Selecting the method to use the HDMI OUT B jack (HDMI OUT B Mode) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 249 Coaxial: Specifies input of digital audio signals to the COAXIAL IN SA-CD/CD jack. Analog: Specifies input of analog audio signals to the AUDIO IN (L/R) jacks. Note Depending on the input, [Optical], [Coaxial] or [Analog] may not be displayed. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 250 When you assign the digital audio input, the Input Mode setting may change automatically. One reassignment is allowed for each input. If no sound is output from the assigned jacks, also check the Input Mode settings. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 251 For example, by saving the settings in the [1: Movie] preset as follows, you can switch the settings of the unit all at one time without switching each setting for [Input], [Sound Field] and [Calibration Type] individually. Input: BD/DVD Sound Field: Multi Stereo (MULTI ST.) Calibration Type: Engineer Related Topic Saving the settings to a preset 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 252 You can overwrite [1: Movie] with the present settings by holding down CUSTOM1 for 3 seconds in the same way as you do when you select [Import] from the menu. Related Topic Recalling the preset settings Items for which you can save settings and the default values for each item Available input sources for each zone 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 253 Select a preset you want. Hint You can recall the setting(s) saved for [1: Movie] directly by pressing CUSTOM1 on the remote control. Related Topic Items for which you can save settings and the default values for each item 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 254 Calibration Type: – Front Bass: – Front Treble: – Center Bass: – Center Treble: – Surround Bass: – Surround Treble: – Height Bass: – Height Treble: – Related Topic Saving the settings to a preset 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 255 If you agree to use the Chromecast built-in function, [Network/Bluetooth Standby] automatically switches to [On]. Related Topic Controlling HDMI devices (Control for HDMI) Enjoying content of a connected device without turning on the unit (Standby Through) Enjoying sound using speakers in Zone 3 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 256 Select [Setup] - [Easy Setup] from the home menu. Follow the instructions on the TV screen to make the settings. You can set [Language], [Auto Calibration], [Internet Settings], etc. Press (up)/ (down)/ (left)/ (right) to select an item, and then press (enter). 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 257 Select the input name you want to change in [Name]. An on-screen keyboard appears on the TV screen. Press (up)/ (down)/ (left)/ (right) and (enter) to select characters one by one to enter the name. Select [Enter]. The name you entered is registered. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 258 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Changing the assignment and display for the input jacks You can customize the settings for each input according to your preferences and usage. Select [Setup] - [Input Settings] from the home menu, then set each item shown below.
Page 259 Auto Optical Coaxial Analog Related Topic Changing the name for each input (Name) Using other digital audio input jacks (Input Assign) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 260 Coaxial: Specifies input of digital audio signals to the COAXIAL IN SA-CD/CD jack. Analog: Specifies input of analog audio signals to the AUDIO IN (L/R) jacks. Note Depending on the input, [Optical], [Coaxial] or [Analog] may not be displayed. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 261 When you assign the digital audio input, the Input Mode setting may change automatically. One reassignment is allowed for each input. If no sound is output from the assigned jacks, also check the Input Mode settings. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 262 [Manual Speaker Settings] or [Auto Calibration Settings] under [Speaker Settings], the changes are reflected in the current speaker configuration ([Preset1] or [Preset2]) and saved. Select [Setup] - [Speaker Settings] from the home menu. Select [Speaker Configuration Selection]. Select a saved speaker configuration with your favorite settings. Preset1 Preset2 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 263 You can check the information saved in the preset selected in [Speaker Configuration Selection]. Select [Setup] - [Speaker Settings] from the home menu. Select [Speaker Configuration Information]. Select the speaker configuration you want to check. Preset1 Preset2 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 264 Press the input buttons on the remote control or turn INPUT SELECTOR on the unit. Press HOME, AMP MENU, HDMI OUT or (muting) on the remote control. Press SPEAKERS on the unit. Change the volume level. Connect headphones. Press MUSIC on the remote control or the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 265 [DSD Native] is set to [On] and DSD signals are being played back. [Pure Direct] is set to [On]. The unit may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 266 Select the setting you want. Full Flat: Makes the measurement of frequency from each speaker flat. Engineer: Sets to “the Sony listening room standard” frequency characteristics. Front Reference: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
Page 267 STR-AN1000/TA-AN1000 Selecting a wireless speaker connection mode (Link mode) This unit supports connection with an optional Sony wireless rear speaker/subwoofer. You can set the connection method for the wireless rear speaker/subwoofer. Select [Setup] - [Speaker Settings] from the home menu.
Page 268 The unit is compatible with connection to Sony wireless rear speaker/subwoofer (not supplied). When you connect the Sony wireless rear speaker/subwoofer to the unit for the first time, follow the steps below. Once connected, the Sony wireless rear speaker/subwoofer will be automatically connected to the unit the next time you turn on the power.
Page 269 Checking the connection status of wireless speakers (Check wireless connection) You can check the connection status of the wireless rear speaker/subwoofer. Select [Setup] - [Speaker Settings] from the home menu. Select [Wireless Speaker Settings]. Select [Check wireless connection]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 270 Off: The frequency band is fixed to avoid interference during wireless connection. If sound dropping occurs while [On] is selected, it may be improved by selecting [Off]. Hint If you want to optimize the frequency immediately, switch this function to [Off], and then [On]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 271 Selecting the playback quality of the wireless speaker (Wireless Playback Quality) You can select the playback quality of the wireless speaker. Select [Setup] - [Speaker Settings] from the home menu. Select [Wireless Speaker Settings]. Select [Wireless Playback Quality]. Select [Sound Quality] or [Connection]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 272 Checking the software version of the wireless speakers (Software Version) You can check the software version of the wireless speakers. Select [Setup] - [Speaker Settings] from the home menu. Select [Wireless Speaker Settings]. Select [Software Version]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 273 Select [TV Center Speaker Mode]. Select [On]. Note This function does not work in the following cases: Headphones are connected. [Speaker Pattern] is set to a setting without center speaker. [Bluetooth Mode] is set to [Transmitter]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 274 A sound field for music is being used. [Bluetooth Mode] is set to [Transmitter]. [In-Ceiling Speaker Mode] is set to [Front & Center] or [Front]. [DSD Native] is set to [On] and DSD signals are being played back. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 275 You can also select [In-Ceiling Speaker Mode] from [Speaker Settings] - [TV/Screen Center Settings] in the [Setup] menu. To obtain optimal effects in the listening environment, set [Manual Speaker Settings] - [Height] - [Ceiling] from [Speaker Settings] menu and perform Auto Calibration. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 276 Hint To adjust the level of all speakers at the same time, press (volume) +/–. You can also use MASTER VOLUME on the unit. The adjusted value is shown on the TV screen during adjustment. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 277 [TV Center] is displayed when the configuration including TV Center (S-Center) is selected in the [Speaker Pattern] setting. Adjust the level. Note When [Bluetooth Mode] is set to [Transmitter], [Level] cannot be set. If headphones are connected, you can only adjust the level of [Front (L)] and [Front (R)]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 278 Only [Bass] gain and [Treble] gain are available for [Front] when headphones are connected. Hint You can also select [Equalizer] in [Setup] - [Speaker Settings] - [Manual Speaker Settings] from the home menu. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 279 Screen, Front (L), Center, Front (R), Surround (R), Surround (L), Surround Back (L), Surround Back (R), Subwoofer Adjust the distance. Note Some parameters may not be available depending on the speaker pattern setting. This function cannot be set in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 280 Front (L), Center, Front (R), Surround (R), Surround (L), Surround Back (L), Surround Back (R), Height (L), Height (R) Adjust the distance. Note Some parameters may not be available depending on the speaker pattern setting. This function cannot be set in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 281 Screen, Listening position, Ceiling, Front (L), Center, Front (R), Surround (R), Surround (L), Surround Back (L), Surround Back (R), Height (L), Height (R), Subwoofer Adjust the height. Note This function cannot be set in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 282 When the front speakers are set to [Small], the center, surround and height speakers are also automatically set to [Small]. If you do not use the subwoofer, the front speakers are automatically set to [Large]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 283 Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. [Size] for none of the speakers is set to [Small]. The surround back speakers will be set to the same setting as that of the surround speakers. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 284 [Speaker Pattern] is set to a setting including the surround speaker or surround back speaker. The subwoofer is set in [Speaker Pattern]. Headphones are not connected. [Bluetooth Mode] is set to other than [Transmitter]. Related Topic Selecting the speaker pattern (Speaker Pattern) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 285 Related Topic Connecting 5.1-channel speaker system with bi-amplifier connection Connecting 5.1-channel speaker system with front B speaker connection Connecting 5.1-channel speaker system with Zone 3 connection Selecting the speaker pattern (Speaker Pattern) Selecting the front speakers 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 286 This function does not work in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. If a speaker pattern with surround back speakers is selected, you cannot set [Height/Overhead Speakers]. Related Topic Speaker configuration and speaker pattern settings 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 287 The position of the speaker and the corresponding terminals on the unit to which the speaker should be connected are shown on the screen. Note When connecting speaker cables, etc., be sure to disconnect the AC power cord (mains lead). 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 288 Select [Setup] - [Speaker Settings] from the home menu. Select [Manual Speaker Settings]. Select [Distance Unit]. Select the setting you want. meter: The distance is displayed in meters. feet: The distance is displayed in feet. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 289 When the unit is successfully connected to the network, [NETWORK] lights up on the display panel of the unit. Hint See [Network Connection Status] in the [Network Settings] menu when checking the network settings. Related Topic Connecting a LAN cable (for wired LAN connections only) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 290 (SSID), wireless LAN router security method, and IP address. Hint See [Network Connection Status] in the [Network Settings] menu when checking the network settings. Related Topic Connecting the unit to the network using the wireless LAN antenna (for wireless LAN connections only) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 291 Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Checking the network connection status (Network Connection Status) You can check the various settings on the network. Select [Setup] - [Network Settings] from the home menu. Select [Network Connection Status]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 292 Select [Software Update Notification]. Select [On] or [Off]. Note New software version information does not appear in the following cases: The latest version is already being used. The unit cannot obtain data via a network. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 293 If [Auto Update] is set to [On] while [Network/Bluetooth Standby] is set to [Off], update starts automatically while the unit is turned off. Depending on the provided update type, the update may start automatically even if [Auto Update] is set to [Off], or the update may start automatically while the unit is turned off. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 294 Do not agree: Select this if you disagree to the collection of information on the usage condition of the device. Select [Complete]. Hint Even if you select [Agree], you can stop the collection of information by reselecting [Do not agree] or resetting [Network Settings] to the default settings in [Resetting]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 295 Select [Setup] - [Network Settings] from the home menu. Select [Chromecast built-in]. Check the following items. Share usage data: When set to [On], the usage condition data is collected. About Chromecast built-in: Shows references about Chromecast built-in function. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 296 Input: Selects an input that works with your Sonos device. Preset Volume: Sets the volume when selecting an input of the Sonos device. Output Zone: Sets the zone to which the sound of the Sonos device is output. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 297 When [HDMI OUT B Mode] is set to [Zone2], the HDMI OUT B/ZONE 2 jack does not support [4K/8K Upscaling]. This function does not work when the input signal is a compressed video signal, VRR signal or Dolby Vision signal. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 298 (power) indicator on the front panel lights up in amber if [Control for HDMI] is set to [On]. This function is enabled only when [HDMI OUT B Mode] is set to [Main]. Related Topic Operating the unit by Interlocking with a TV (Control for HDMI function) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 299 You can set this function only when [HDMI OUT B Mode] is set to [Main] and [Control for HDMI] is set to [On]. The connected device may not turn off depending on the status of the device. System Power Off function may work with devices other than those manufactured by Sony, but operation is not guaranteed. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 300 [On] setting. On: The unit continuously outputs HDMI signals from the HDMI OUT A (TV) jack when in standby mode. Sony recommends this setting if you are using a TV that is not manufactured by Sony.
Page 301 Depending on your TV, eARC setting items may be available. If you set [Audio Return Channel] to [eARC] on the unit, also check the settings on the TV. For details, refer to the instruction manual of the TV. Related Topic Setting TV audio output (when using the eARC/ARC function) Digital audio formats supported by the unit 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 302 When you connect the unit to a video device (projector, etc.), sound may not be output from the unit. In this case, select [AMP]. When you select [TV + AMP], only sound from the HDMI IN jacks is output from the speaker of the TV. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 303 +10 dB: Adjusts the level by +10 dB with respect to the input signal. 0 dB: Does not adjust the level with respect to the input signal. Note When [GAME], [MEDIA BOX], [BD/DVD], [SAT/CATV], [VIDEO], or [SA-CD/CD] is selected as the input, each input can be set independently. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 304 When [HDMI OUT B Mode] in [HDMI Settings] is set to [Zone2], the video signals that can be played are limited depending on the input as follows: GAME, MEDIA BOX: up to 4K/60p 4:4:4 VIDEO, SACD/CD: up to 4K/60p 4:2:0 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 305 You can display information about the monitor connected to the HDMI OUT A (TV) and HDMI OUT B/ZONE 2 jacks of the unit. Select [Setup] - [HDMI Settings] from the home menu. Select [Monitor Information]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 306 [Enhanced format (4K120, 8K)] on this unit. For details on the setting of the TV menu, refer to the operating instructions of the TV. For details about the high bandwidth video format, refer to “Video formats supported by the unit.” Related Topic About HDMI connections 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 307 When the input of the unit is TV, you can output the video from the device connected to the HDMI IN jack of the unit to the TV. Set this function when using the dual screen display function of the TV. Select [Setup] - [HDMI Settings] from the home menu. Select [Video output for PIP/PBP-displayed TV]. Select [On]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 308 You can also press 360SSM on the remote control to activate or deactivate the [360 Spatial Sound Mapping] function. You can also select [360 Spatial Sound Mapping] from the [Audio Settings] in the [Setup] menu. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 309 [Multi Stereo] except for 2-channel content [A.F.D.] [A.F.D. Movie] [Audio Enhancer] except for 2-channel content Hint You can also press 360SSM on the remote control to activate or deactivate the [360 Spatial Sound Mapping] function. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 310 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Calibrating speaker positioning (SpeakerRelocation / PhantomSurroundBack) This function calibrates the speaker positioning (angle of each speaker’s configuration from the measurement position) based on the measurement results of D.C.A.C. IX (Digital Cinema Auto Calibration) function to bring the sound closer to the surround-sound effect obtained with ideal speaker positioning.
Page 311 [Direct] is being used and an analog input is selected. [In-Ceiling Speaker Mode] is set to [Front & Center] or [Front]. [DSD Native] is set to [On] and DSD signals are being played back. Perform Auto Calibration before using the [SpeakerRelocation / PhantomSurroundBack] function. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 312 [Bluetooth Mode] is set to [Transmitter]. When [DSD Native] is set to [On] and DSD signals are being played back, the settings of [Equalizer] and [Subwoofer Low Pass Filter], etc., are invalid, and the sound field does not work. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 313 Hint You can also use PURE DIRECT on the remote control or the unit to turn the [Pure Direct] function on or off. You can also select [Pure Direct] from [Audio Settings] in [Setup] menu. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 314 Off: Does not activate the low-pass filter. Note This function does not work in the following cases: [Bluetooth Mode] is set to [Transmitter]. [DSD Native] is set to [On] and DSD signals are being played back. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 315 The unit may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format. This function is not available in the following cases: [Bluetooth Mode] is set to [Transmitter]. [DSD Native] is set to [On] and DSD signals are being played back. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 316 Sub: Sound in the sub language will be output. Main/Sub : Sound in the main language will be output through the front left speaker and sound in the sub language will be output through the front right speaker simultaneously. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 317 Auto︓This function is automatically enabled if there is additional information that recommends the use of this function in the source. Note [Audio DRC] is effective only when playing Dolby Digital, Dolby Digital Plus and Dolby TrueHD. For Dolby TrueHD, this function is effective only when the disk contains DRC information. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 318 Auto: Upmix is performed according to the surround environment. Note This function does not work in the following cases: [Bluetooth Mode] is set to [Transmitter]. The sound field is set to [2ch Stereo], [Direct] or [Headphone (2ch)]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 319 This function does not work in the following cases: [Bluetooth Mode] is set to [Transmitter]. The sound field is set to [2ch Stereo], [Direct] or [Headphone (2ch)]. A height/overhead speaker is connected, or a wireless speaker with built-in enabled speaker is connected. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 320 Set whether to add the effect to the audio as if you were watching it at home in the theater when you play IMAX Enhanced content. Select [Setup] - [Audio Settings] from the home menu. Select [IMAX Mode]. Select the setting you want. Auto: IMAX effect is automatically added when you play IMAX Enhanced content. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 321 Redirect to Subwoofer: Redirects the low frequency band of the IMAX signal to the subwoofer. When this setting is set to [On], the bass with the bass management function is output even while playing IMAX content. When this setting is set to [Off], the bass that IMAX content has is output. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 322 Turn on the TV and the unit in the main zone. Select [Setup] - [Zone Settings] from the home menu. Select [Zone2 Settings]. Follow the instructions on the TV screen to make connections and settings. Select [Confirm changes]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 323 Turn on the TV and the unit in the main zone. Select [Setup] - [Zone Settings] from the home menu. Select [Zone3 Settings]. Follow the instructions on the TV screen to make connections and settings. Select [Confirm changes]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 324 The volume for the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 3) terminals is changed together with the volume for the AUDIO ZONE 3 OUT jacks. Related Topic Enjoying sound using another amplifier in Zone 3 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 325 You can also switch between BLUETOOTH RX (Receiver) mode and BLUETOOTH TX (Transmitter) mode by pressing BLUETOOTH TX/RX on the remote control. Depending on the BLUETOOTH receiver, you can adjust the volume of the BLUETOOTH receiver from this unit when [Transmitter] is selected. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 326 [Transmitter]. You can perform pairing with detected devices from the list. Select [Setup] - [Bluetooth Settings] from the home menu. Select [Device List]. Hint Select [Scan] to refresh the list. Related Topic Selecting the BLUETOOTH mode (Bluetooth Mode) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 327 Priority on Stable Connection: Gives priority to BLUETOOTH connection. Select this setting if the sound is easily interrupted. Note This setting cannot be selected in the following cases: [Bluetooth Mode] is set to [Off]. A BLUETOOTH device is connected. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 328 LDAC is an audio compression technology that enables transmission via BLUETOOTH of high-resolution audio sources, developed by Sony. Unlike the existing compression technology for BLUETOOTH such as SBC, it processes high-resolution audio sources without down-converting them to low frequencies and low bit numbers (*1). In addition, by applying extremely efficient coding and optimizing packet distribution, it is possible to transmit data volume that is about three times that of conventional technology (*2), realizing unprecedented high-quality BLUETOOTH wireless transmission.
Page 329 TV. However, if you select a language that is not supported by the unit when you set the language on the TV, the unit's on-screen display language will not change. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 330 You can turn on or off the information display which appears on the TV screen when the volume level or sound field, etc., of the unit is changed. Select [Setup] - [System Settings] from the home menu. Select [Auto Display]. Select the setting you want. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 331 Note If you agree to use the Chromecast built-in function, [Network/Bluetooth Standby] automatically switches to [On]. If you set [RF Channel] to [On], [Network/Bluetooth Standby] automatically switches to [On]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 332 [FM TUNER] is selected as the input (for US, Canadian, and Asia-Pacific models only). The software of the unit is being updated. BLUETOOTH receiver (headphones/speakers) are connected. [DSD Native] is set to [On] and DSD signals are being played back. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 333 You can switch the brightness of the display panel. Select [Setup] - [System Settings] from the home menu. Select [Dimmer]. Select the setting you want. Bright Dark Hint You can also select the setting using the DIMMER on the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 334 Select [Device Name Setting]. An on-screen keyboard appears on the TV screen. Press (up)/ (down)/ (left)/ (right) and (enter) to select characters one by one to enter the name. Select [Enter]. The name you entered is registered. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 335 Checking the software version and MAC address of the unit (System Information) You can display the software version information and MAC address of the unit. Select [Setup] - [System Settings] from the home menu. Select [System Information]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 336 Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Checking software license information (Software License Information) You can check the software license information. Select [Setup] - [System Settings] from the home menu. Select [Software License Information]. Follow the on-screen instructions. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 337 Select the setting you want. Stereo: The FM station is received in stereo. Monaural: The FM station is received in monaural. Hint If the FM stereo reception is poor, it may be improved by setting [FM Mode] to [Monaural]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 338 (enter) to select characters one by one to enter the name. Select [Enter]. The name you entered is registered. Canceling naming input Press BACK before Step 6. Note Some letters that can be displayed on the TV screen cannot be displayed on the display panel. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 339 You can preset the gain level of the FM tuner. Select [Setup] - [System Settings] from the home menu. Select [FM Tuner Settings]. Select [Preset Gain Level]. Press (up)/ (down) to adjust the gain level. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 340 Do not turn the unit off or disconnect the AC power cord (mains lead) and the LAN cable until the download and update processes are completed. Doing so may cause a malfunction. When you use Sony wireless rear speakers/subwoofer (not supplied), turn on each speaker and make sure the connection with the unit is established.
Page 341 [Auto Update Settings] to [Off]. If the update of Sony wireless rear speakers/subwoofer (not supplied) does not work, move them closer to the unit and update them. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 342 It takes a few minutes for the memory to be cleared completely. Do not turn the unit off until [RESET] appears on the display panel. By resetting, the link with the wireless subwoofer and rear speakers (not supplied) may be lost. In this case, reconnect them by referring to their operating instructions. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 343 Some parameters and settings may appear dimmed on the display panel. This means that they are either unavailable or fixed and unchangeable. Related Topic Menu list (on the display panel) Indicators on the display panel 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 344 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Menu list (on the display panel) The following options are available in each menu. Press AMP MENU on the remote control to display the menu on the display panel. Input Settings [<INPUT>] The following settings are available for each input.
Page 345 Surround left speaker level [SL LEVEL] SL -10.0 dB to SL +10.0 dB (0.5 dB interval) Height left speaker level [HL LEVEL] HL -10.0 dB to HL +10.0 dB (0.5 dB interval) Height right speaker level [HR LEVEL] HR -10.0 dB to HR +10.0 dB (0.5 dB interval) Subwoofer Level [SW LEVEL] SW -10.0 dB to SW +10.0 dB (0.5 dB interval) Distance from Listening Position [LISTN DIST.] (*2)
Page 346 SBR 1.00 m to SBR 20.00 m (SBR 3’3” to SBR 65’7”) (0.01 m (1 inch) interval) Surround back left speaker distance [SBL DIST.] SBL 1.00 m to SBL 20.00 m (SBL 3’3” to SBL 65’7”) (0.01 m (1 inch) interval) Surround left speaker distance [SL DIST.] SL 1.00 m to SL 10.00 m (SL 3’3”...
Page 347 LARGE, SMALL Height speakers size [HT SIZE] LARGE, SMALL Crossover Frequency [CROSS FREQ] (*4) Front speakers crossover frequency [FRT CROSS] CROSS 40 Hz to CROSS 200 Hz (10 Hz interval) Center speaker crossover frequency [CNT CROSS] CROSS 40 Hz to CROSS 200 Hz (10 Hz interval) Surround speakers crossover frequency [SUR CROSS] CROSS 40 Hz to CROSS 200 Hz (10 Hz interval) Height speakers crossover frequency [HT CROSS]...
Page 348 Control for HDMI [CTRL: HDMI] CTRL ON, CTRL OFF Standby Linked to TV [STBY LINK] ON, AUTO, OFF Standby Through [STBY THRU] ON, AUTO, OFF Audio Return Channel [ARC SET] (*8) EARC, ARC, OFF Audio Out [AUDIO OUT] AMP, TV+AMP Subwoofer Level [SW LEVEL] SW AUTO, SW +10, SW 0 HDMI OUT B Mode [OUTB MODE]...
Page 349 AUTO, OFF IMAX Adjustment [IMAX.ADJUST] HPF/Crossover [HPF/CROSS] Set the crossover frequency of the speakers other than subwoofer. 40 Hz to 200 Hz (10 Hz interval), AUTO LPF for Subwoofer [LPF SW] 40 Hz to 200 Hz (10 Hz interval), AUTO Subwoofer Volume [SW VOL] -10.0 dB to +10.0 dB (0.5 dB interval) Redirect to Subwoofer [REDIRECT.SW]...
Page 350 You can only select this setting when [Bluetooth Mode] is set to [Transmitter]. This setting automatically switches to [STBY ON] in the following cases: You agree to use the Chromecast built-in function. You set [RF Channel] to [On]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 351 Search for the cause and solution of the issue by referring to this Help Guide. The troubleshooting method is listed in “Troubleshooting.” Search for the cause and solution of the issue on the Sony support site. Sony support site provides latest support information and Frequently Asked Questions.
Page 352 After checking the above items and fixing any problems, plug in the AC power cord (mains lead) and turn on the unit. If the problem persists, consult your nearest Sony dealer. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 353 While Network Update is performed, press (power). If the problem persists, insert a USB flash drive on which the package file for updating the unit is saved, and then press (power) again. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 354 Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 [Overload has been detected.] appears on the TV screen. An over-current from the (USB) port was detected. Disconnect the USB device as prompted in the warning message and close the message. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 355 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 List of messages after Auto Calibration measurements Error 30: Headphones inserted. Remove headphones and re-measure. Error 31: SPEAKERS(A/B/A+B/OFF) are off. Re-measure with audio coming out of the SPEAKERS (A/B/A+B/OFF). For details on the front speaker selection, see “Selecting the front...
Page 356 The speaker name in this warning message depends on the detected symptom. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 357 If [Auto Standby] is set to [On], set it to [Off]. [PROTECTOR] or [THERMAL] was activated. Related Topic Setting the unit to switch to standby mode automatically (Auto Standby) [PROTECTOR] or [THERMAL] appears on the display panel. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 358 Cannot find an available input when connecting several digital devices. You can reassign the COAXIAL IN SA-CD/CD/OPTICAL IN TV jacks to other inputs. “Using other digital audio input jacks (Input Assign).” Related Topic Using other digital audio input jacks (Input Assign) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 359 Check the speaker settings of the TV. The unit power syncs with the speaker settings of the TV. For details, refer to the operating instructions of the TV. If sound was output from the speakers of the TV last time, the unit does not turn on even when the TV is turned on. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 360 Check [Standby Linked to TV] in the [HDMI Settings] menu. When the function is set to [On], the unit automatically turns off interlocked with the TV-power off operation, regardless of the input of the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 361 Check [Standby Linked to TV] in the [HDMI Settings] menu. If you want the unit to turn off when the TV is turned off regardless of the input of the unit, set [Standby Linked to TV] to [On]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 362 B/ZONE 2 jack. Analog video signals input to the VIDEO IN jacks are output only from the MONITOR OUT jack. For details, see “About input/output of video signals.” Related Topic Notes on connecting cables About HDMI connections 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 363 Disconnect the HDMI cable from the unit and TV and then reconnect the cable. Supported video signals vary depending on the HDMI IN jack. For details on the supported video signals, see “Connecting devices with HDMI jacks.” Related Topic Notes on connecting cables About HDMI connections 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 364 Turn on the unit to select the HDMI device from which you want to enjoy content. Make sure [Standby Through] is set to [Auto] or [On] in the [HDMI Settings] menu. Related Topic Enjoying content of a connected device without turning on the unit (Standby Through) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 365 The home menu will not appear when the TV's video input is connected to the MONITOR OUT jack of the unit and the video input is selected on the TV. Connect the TV and the unit with an HDMI cable, and select the HDMI input on the TV. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 366 Depending on the unit setting, some video equipment may not output HDR content in HDR mode due to lack of signal bandwidth, even if both TV and video equipment support HDR. In this case, set [HDMI Signal Format] of the selected input to [Enhanced format] or [Enhanced format (4K120, 8K)] in the [HDMI Settings] menu. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 367 If the PURE DIRECT indicator on the front panel lights up, press PURE DIRECT to turn off this function. Press DIMMER on the unit, and then adjust the brightness of the display panel. Related Topic Enjoying high-fidelity sound (Pure Direct) Switching the brightness of the display panel (Dimmer) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 368 Turn on the unit, then select the input to which the playing device is connected. If connected to other devices than those manufactured by Sony that support the Control for HDMI function, set [Control for HDMI] to [On] in the [HDMI Settings] menu.
Page 369 TV. Select the language on the unit again to return to the previous setting. Related Topic Selecting the language used on the menu of the unit displayed on the TV (Language) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 370 Set [DSD Native] in [Audio Settings] to [Off]. If the speaker assigned as a signal source is not installed, playback is not available during DSD Native playback because content will be played on the target speaker. Also, Zone output is not available because downmix process does not work. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 371 Make sure that the connecting cables are not near a transformer or motor. Move your audio device away from the TV. If the plugs and jacks are dirty, wipe them with a cloth slightly moistened with alcohol. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 372 When you play content in the DTS format or the sound field is set to [DTS:X Mode], sound may not be output from the height speakers. In this case, set [Speaker Pattern] in [Manual Speaker Settings] under [Speaker Settings] to [5.1.2 (FH)]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 373 Make sure the [Manual Speaker Settings] - [Wireless Speaker Assign] in the [Speaker Settings] menu is completed. After selecting a speaker pattern for wireless speakers from the [Manual Speaker Settings] - [Speaker Pattern] in the [Speaker Settings] menu, set the speaker configuration you wish to use in the [Wireless Speaker Assign]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 374 Install the speaker system and the wireless speaker at a distance of 1.5 m (5 ft) or more from a wireless LAN router, etc. It may be improved by changing the direction or the antenna’s angle of the wireless LAN router. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 375 Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 The sound is interrupted. Sound may be interrupted when the sampling frequency, number of channels or audio format of audio output signals from the playback device is switched. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 376 If you connect the unit to a TV that is incompatible with both the eARC and ARC functions, set [Audio Return Channel] to [Off] in the [HDMI Settings] menu, and connect the TV to the OPTICAL IN TV jack of the unit with an optical cable. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 377 The sound may not be output through the TV speaker depending on the sound source. When a BLUETOOTH device is connected and [Bluetooth Mode] is set to [Transmitter], or a headphone is connected, the sound will not be output through the TV speaker. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 378 Cannot select the desired input for playback in Zone 2 or Zone 3. There are limits to the inputs that can be played in Zone 2 and Zone 3. For details, see “Available input sources for each zone.” 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 379 Sound may not be output from the target speakers depending on the playback signals or the speaker settings. Be sure to select the optimal sound field for the content. For details on relations between sound fields and speaker outputs, see “Relations between sound fields and speaker outputs.” 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 380 You can only select an input from the HDMI IN jacks in Zone 2. Since the audio signals are output from the HDMI OUT B/ZONE 2 jack as they are, you cannot adjust the volume level on the unit. Adjust the volume on the device connected to the HDMI OUT B/ZONE 2 jack. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 381 TV. Check that the selected digital audio input jack is not assigned to another input. Related Topic Notes on connecting cables Setting the HDMI audio signal output of connected devices (Audio Out) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 382 The Dolby Atmos-compatible sound played back on the TV is not output from the unit. Connect the eARC/ARC-compatible HDMI input jack of your TV to the HDMI OUT A (TV) jack of the unit, then follow the steps in “Setting TV audio output (when using the eARC/ARC function).” 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 383 The left and right sound is unbalanced or reversed. Check that the speakers and device are connected correctly and securely. Adjust the sound level parameters using the [Manual Speaker Settings] - [Level] in the [Speaker Settings] menu. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 384 Set [Audio Out] to [AMP] in the [HDMI Settings] menu or change the speaker output setting to “Audio System” on the TV. You can only enjoy DTS-HD Master Audio, Dolby TrueHD and object-based audio formats (DTS:X and Dolby Atmos) with an HDMI connection. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 385 To activate the virtualizer and obtain the surround effect when the speaker pattern is set to [2.0] or [2.1], set [Sound Field] to [A.F.D.], [A.F.D. Movie], [Dolby Mode] or [DTS:X Mode], set [Upmixer] to [Auto], and set [Virtualizer] to other than [Off]. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 386 The speaker cables may not be connected securely. Check that they are connected securely and cannot be disconnected by pulling on them slightly. The speaker cables may have short-circuited. Turn off the unit, reconnect them correctly, and then turn on the unit again. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 387 A test tone is output from a different speaker than the speaker displayed on the TV screen. The speaker pattern setting is incorrect. Make sure that the speaker connections and the speaker pattern match correctly. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 388 Turn on the unit to select the HDMI device from which you want to play. Make sure [Standby Through] is set to [Auto] or [On] in the [HDMI Settings] menu. Related Topic Enjoying content of a connected device without turning on the unit (Standby Through) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 389 Set the speaker setting of the TV (BRAVIA) to “Audio System.” Refer to the operating instructions of your TV regarding how to set the TV. Related Topic TV sound cannot be heard from the speakers connected to the unit. (eARC/ARC) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 390 Turn on the unit, then select the input to which the playing device is connected. If connected to other devices than those manufactured by Sony that support the Control for HDMI function, set [Control for HDMI] to [On] in the [HDMI Settings] menu.
Page 391 TV speakers, Set [Audio Out] to [AMP] in the [HDMI Settings] menu or change the speaker output setting to “Audio System” on the TV. The sound output will only come from the speakers connected to the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 392 Adjust the A/V Sync settings on the TV. For details, refer to the operating instructions of the TV. When the sound field is set to [Audio Enhancer], change the sound field to other than [Audio Enhancer]. For details on the sound fields, see “Selectable sound fields and their effects.” 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 393 Position the FM wire antenna (aerial) as horizontally as possible. Related Topic The FM stereo reception is poor (for US, Canadian, and Asia-Pacific models only). Connecting the antenna (aerial) (for US, Canadian, and Asia-Pacific models only) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 394 Select [Monaural]. Note You can set FM mode in the options menu if the frequency indication is selected in step 3. Related Topic The FM reception is poor (for US, Canadian, and Asia-Pacific models only). 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 395 No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations is used). Preset the stations. Press DISPLAY MODE on the front of the unit repeatedly so that the frequency appears on the display panel. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 396 RDS does not work (for Asia-Pacific models only). Make sure that you are tuned to an FM RDS station. Select a stronger FM station. The station you tuned to is not transmitting the RDS signal or the signal is weak. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 397 The RDS information that you want does not appear (for Asia-Pacific models only). The service may be temporarily out of order. Contact the radio station and find out whether they actually provide the service in question. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 398 The USB device is not recognized. File or folder names are not displayed on this unit. Playback is not possible. The sound skips. There is noise. Distorted sound is output. Related Topic USB specifications and compatible USB devices 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 399 When the music on the USB device is played back, there is noise, skipping, or distorted sound. Turn off the unit, reconnect the USB device, and then turn on the unit. Check if the music data itself contains noise, or the sound is distorted. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 400 Turn off the unit, then disconnect the USB device. Turn on the unit again and reconnect the USB device. Connect a compatible USB device. The USB device does not work properly. Refer to the section on how to deal with this problem in the operating instructions of the USB device. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 401 The unit can recognize and play up to the following files or folders in USB devices: up to folders in the 11th layer (including the root folder) up to 998 files/folders in a single layer Related Topic USB specifications and compatible USB devices 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 402 The USB device is being connected upside down. Connect the USB device in the correct orientation. Check the shape of the USB device’s plug. If the shape does not fit the unit’s port, you will not be able to connect the USB device to the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 403 Upper case letters (A to Z) Lower case letters (a to z) Numbers (0 to 9) Symbols (’ = < > * + , – . / @ [ \ ] _ `) Other characters may not be displayed correctly. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 404 Playback is possible up to 11 layers (including the root folder). There are more than 998 folders (including the root folder). There are more than 998 files. Files that are encrypted, protected by passwords, etc. cannot be played. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 405 Wireless networks are influenced by electromagnetic radiation emitted by microwave ovens and other devices. Move the unit away from these devices. Related Topic Checking the network connection status (Network Connection Status) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 406 If you have initialized the unit or performed a system recovery on your server, perform the network settings again. Related Topic Setting up a wireless LAN connection Setting up a wired LAN connection Checking the network connection status (Network Connection Status) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 407 (enter). The unit can recognize and play up to the following files or folders stored in the home network server: up to folders in the 19th layer up to 999 files/folders in a single layer 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 408 Depending on the network environment, it may not be possible to play tracks on the multiple devices at the same time. Turn off other devices to enable the unit to play tracks. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 409 Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 [There is no playable file.] appears. If there are no folders or files that can be played on the unit in the selected folder, you cannot expand the folder to display its content. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 410 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Cannot play copyrighted files. Audio content with DRM (Digital Rights Management) copyright protection cannot be played on this unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 411 Help Guide Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Cannot select a previously selected track. The track information may have been changed on the server. Refresh the server list and then reselect the server. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 412 Playing content stored on the server (the unit is operating as a player) Updating the software Displaying setting screen When using Sony | Music Center, also see “Cannot control the unit using a Sony | Music Center device..” 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 413 Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 The unit cannot be turned on by devices on a network. Set [Network/Bluetooth Standby] to [On] if you want to turn the unit on by operating the devices on a network. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 414 The unit cannot be found from an iPhone/iPad/iPod touch or iTunes. Make sure the unit and the iPhone/iPad/iPod touch or computer with iTunes is connected to the same network. Update the software of the unit and the iPhone/iPad/iPod touch or iTunes to the latest version. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 415 The sound may skip depending on factors such as the network environment. Depending on the audio files, playback may require network speed. If you use a wired LAN connection, check the network hub and/or router. If you use a wireless LAN connection, check the router and/or access point. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 416 If using a wireless LAN connection, make sure that both of the wireless LAN antennas on the unit are pointing up. Additionally, try changing the positioning of the router and the unit. Keep the unit away from microwave ovens. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 417 If your contract with your Internet provider limits Internet connection to one device at a time, this unit will not be able to access the Internet when another device is already connected. Consult your carrier or service provider. Related Topic Checking the network connection status (Network Connection Status) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 418 The sound skips. The bandwidth of your network may be too low. If using wireless LAN connection, move the unit and the wireless LAN router/access point closer to each other, without any obstructions between them. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 419 Pairing may not be possible if there are other BLUETOOTH devices near the unit. In this case, turn off the other BLUETOOTH devices. Enter “0000” when you are prompted for a passkey during the pairing operation. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 420 While connected to a BLUETOOTH device, this unit cannot be detected from the other BLUETOOTH devices. Erase the pairing registration information of the BLUETOOTH device and perform the pairing operation again. Related Topic Selecting the BLUETOOTH mode (Bluetooth Mode) 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 421 If there are obstructions between the unit and your BLUETOOTH device, remove these or move the unit and/or device avoid them. If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 422 The sound of your BLUETOOTH device cannot be heard on the unit. Turn up the volume on your BLUETOOTH device first, and then adjust the volume using (volume) + on the remote control (or MASTER VOLUME on the unit). 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 423 If there is a device that generates electromagnetic radiation, such as a wireless LAN, other BLUETOOTH device, or a microwave oven nearby, move it away. Turn down the volume of the connected BLUETOOTH device. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 424 Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Cannot control the unit using a Sony | Music Center device. It may take some time for the unit to connect to the network after it is turned on. Try again later.
Page 425 Tuner-related devices: up to 4 devices (used one by this unit) Audio system (receiver, amplifier, headphones, etc.): up to 1 device (used by this unit) When [HDMI OUT B Mode] is set to [Zone2], the Control for HDMI function does not work. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 426 Switch input of the unit to [TV]. Related Topic Controlling HDMI devices (Control for HDMI) Switching between digital and analog audio (Input Mode) TV sound cannot be heard from the speakers connected to the unit. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 427 Point the remote control at the remote control sensor on the unit. Remove any obstructions between the remote control and the unit. Replace both of the batteries in the remote control with new ones if they are weak. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 428 It takes a few minutes for the memory to be cleared completely. Do not turn the unit off until [RESET] appears on the display panel. By resetting, the link with the wireless subwoofer and rear speakers (not supplied) may be lost. In this case, reconnect them by referring to their operating instructions. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 429 Be sure to use the buttons on the unit to perform this operation. Hold down MUSIC and press (power) on the unit. [S.F.INITIALIZED!] appears on the display panel and all sound fields are reset to their default setting. 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 430 Multi Channel AV Receiver/Multi Channel AV Amplifier STR-AN1000/TA-AN1000 Customer support websites Refer to the following websites for the latest information on the unit. For customers in Americas: https://www.sony.com/am/support For customers in Europe: https://www.sony.eu/support For customers in Asia-Pacific countries and regions: https://www.sony-asia.com/support 5-037-030-11(1) Copyright 2022 Sony Corporation...
Page 431 Wi-Fi CERTIFIED™, WPA™, and WPA2™ are trademarks of Wi-Fi Alliance. Being Roon Tested means that Sony and Roon have collaborated to ensure you have the best experience using Roon software and Sony equipment together, so you can just enjoy the music.
Page 432 Network services, content and the (operating system and) software of this product may be subject to individual terms and conditions and changed, interrupted or discontinued at any time and may require fees, registration and credit card information. 5-037-030-11(1) Copyright 2022 Sony Corporation...

Sony STR-AN1000 Startup Manual

Quick Links

Related Manuals for Sony STR-AN1000

Summary of Contents for Sony STR-AN1000

Table of Contents