Advertisement
Quick Links
Advertisement
Related Manuals for IBM System x dx360 M3
Summary of Contents for IBM System x dx360 M3
- Page 1 IBM System x nVidia M1060 (43V5909) Installation on dx360 M3 © 2007 IBM Corporation...
- Page 2 IBM System x 2x NV M1060 Configuraiton © 2007 IBM Corporation 08/27/2010...
- Page 3 IBM System x GPU1 Installation Step 1: Remove screws holding left-slot EMI bottom cover. (Please use this torque : 6 In-lbs) Step 2: Remove EMI bottom cover Step 3/4: Unlock PCI holder © 2007 IBM Corporation 08/27/2010...
- Page 4 IBM System x GPU1 Installation © 2007 IBM Corporation 08/27/2010...
- Page 5 Step 5: Slide GPU into GPU tray with card aslant Step 6: Slide GPU into GPU tray Step 7: Slide GPU into GPU tray and seat fully into PCIe slot Step 8: Reinstall EMI bottom cover © 2007 IBM Corporation 08/27/2010...
- Page 6 IBM System x GPU1 Installation © 2007 IBM Corporation 08/27/2010...
- Page 7 (Please use this torque : 6 In-lbs) Step 10: Plug GPU power cable and route cable Step 11: Lock PCI holder Step 12: Remove right-side slots retaining cover (Please use this torque : 6 In-lbs) © 2007 IBM Corporation 08/27/2010...
- Page 8 IBM System x GPU1 Installation © 2007 IBM Corporation 08/27/2010...
- Page 9 Step 1: Slide M1060 halfway into side bay Check point 1: - M1060 extender in the groove of blue retainer bracket. - Power cable for M1060 is not tangled (not yet connected to M1060). © 2007 IBM Corporation 08/27/2010...
- Page 10 - Check point 2: # While forwarding the card, ensure the edge of I/O bracket meets chassis bottom. # Do not lift M1060 during this step. © 2007 IBM Corporation 08/27/2010...
- Page 11 IBM System x GPU2 Installation Step 3: © 2007 IBM Corporation 08/27/2010...
- Page 12 IBM System x GPU2 Installation Step 4: © 2007 IBM Corporation 08/27/2010...
- Page 13 IBM System x GPU2 Installation Step 5: © 2007 IBM Corporation 08/27/2010...
- Page 14 # Check if screw holes on M1060 and chassis aligned. Or EMI shield (blue line) is not higher than I/O bracket (red line). # More illustrations on the next page for the definitions of the lines. © 2007 IBM Corporation 08/27/2010...
- Page 15 IBM System x GPU2 Installation © 2007 IBM Corporation 08/27/2010...
- Page 16 IBM System x GPU2 Installation Step 7: Connect power cable and screw side cover on (Please use this torque : 6 In-lbs) © 2007 IBM Corporation 08/27/2010...