Switch cover
Description
Switch cover (includes display convertible hinge base cover)
Before removing the switch cover, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the switch cover:
Turn the computer upside down, with the rear panel toward you.
1.
Remove the two Phillips PM2.5×10.0 screws (1) and the Phillips PM2.5×5.0 screw (2) that secure
2.
the switch cover to the computer.
Turn the computer display-side up, with the front toward you.
3.
Open the computer as far as possible.
4.
38
Chapter 4 Removal and replacement procedures
Battery on page
29).
Spare part number
442889-001