Remove the WLAN module (3) by pulling it away from the socket at an angle .
4.
NOTE:
WLAN module socket.
Reverse this procedure to install a WLAN module.
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
DVD-RW and CD-RW Combo Drive
DVD±RW and CD-RW SuperMulti Double-Layer Combo Drive with LightScribe
** For use with F550–F579, G6000 models
Before removing the optical drive, follow these steps:
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
1.
computer on, and then shut it down through the operating system.
Disconnect all external devices connected to the computer.
2.
Disconnect the power cord.
3.
Remove the battery (see
4.
Remove the optical drive:
Position the computer with the left side toward you.
1.
Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.
2.
Insert a thin tool, such as a paper clip (2), into the media tray release hole. (The optical drive media
3.
tray is partially ejected from the optical drive bay.)
36
Chapter 4 Removal and replacement procedures
WLAN modules are designed with a notch (4) to prevent incorrect installation into the
Battery on page
29).
Spare part number
442883-001
442884-001
453048-001**