Table of Contents
Advertisement
15Min Auto Off
- When '15Min Auto Off' is set to 'Enable', TV will turn off if there is no signal in 15Min.
Auto Sensing
- If 'Auto Sensing' is set to 'To Set
that you set to "ON' is received.
- If 'Auto Sensing' is set to 'Disable', the input is not switched when the input signal is received.
*
SIMPLINK and Auto Sensing cannot work simultaneously. If SIMPLINK is set to On, Auto
Sensing is automatically set to Disable.
*
If the signal is removed while Auto Sensing (automatic input switch) is enabled, the input returns
to the previous setting.
If the several input are connected by enabling Auto Sensing and the automatic input returns to
the previous setting.
If the several inputs are connected by enabling Auto Sensing and the automatic input switch is
performed several times, the input returns to the previous setting only for the last input and does
not repeat the operation for the rest.
*
For the AV input connected using the euro scart cable, Auto Sensing does not word for the TV
input because the Auto AV function is enabled. (For other inputs, Auto Sensing works normally.)
inStant On
- Determine whether to enable Instant On or not.
- When Instant On is enabled, TV will move on WARM mode automatically whenever TV is
powered off. Therefore user will feel no booting time. But it causes more power consumption in
power off.
External Speaker
Volume Control
- Selects the volume control method of an external speaker.
You can select 'Off', 'Int Variable',' Fixed.','Ext Variable', 'Line Output' by pressing
Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 1 Watts.
Int variable is linked to the main volume OSD and change the volume 0 - 1 Watts.
Line output is Fixed line level (typically 500 mVrms ±100 mVrms @10KΩ) output.
Fixed produces a fixed output. The default is Off.
Output
- This item is enabled when Volume Control is set to Fixed. You can choose one of 7 steps.
(0.01/0.03/0.05/0.1/0.2/0.5/1 Watts). The Default is 0.01 Watt.
Set id Setup
Set id Lock
- Set the 'Set ID' item in 'GENERAL' Menu whether to activate or not.
- Set to Yes(Work) or No(Do Not Work).
', the input is automatically switched when the input signal
25
INSTALLATION MENU
button.
Advertisement
Table of Contents
