Table of Contents
Advertisement
16
INSTALLATION MENU
Volume
- Decide to apply volume policy of 'Start Volume', 'Maximum Volume' and 'Minimum Volume' as
Yes(Work) or No(Do Not Work).
- (0 ≤ Min ≤ Start ≤ Max ≤ 100)
Start Volume
y This entry sets the start volume level when is power on.
- The level is specified as a number between minimum volume to maximum value. (Min ≤ Start ≤
Max)
- The default setting is 'Off' (disabled).
- When enabled, if the value is lower then the minimum specified in the minimum volume entry, the
minimum volume entry must be used.
- When enabled, if the value is larger then the maximum specified in the maximum volume entry,
the maximum volume value must be used.
- Access to a volume in 'On Timer' must be fixed to start volume when 'Hotel Mode Operation' (Yes)
and 'Start Volume' (Off, 0 ~ 100) were set simultaneously.
Maximum Volume
y This entry sets the maximum volume level the set. The level is specified as a number between 'Minimum
Volume' to 100. (Min ≤ Max ≤ 100).
- If the command volume up to higher than maximum volume' is received, that should be ignored.
- The default value is 100.
Minimum Volume
y This entry sets the minimum volume level the set will produce.
- The level is specified as a number between 0 to 'Maximum Volume'. (0 ≤ Min ≤ Max)
- If the command volume down to lower than minimum volume is received, that should be ignored.
- The default value is 0.
Key Management
- It is possible to manage the usability 'Local/Front Key' and 'Remote Control'.
Limited Mode
- Configure TV function's limitation. When selected to 'Yes', following sub-menus will be worked by
below.
Setup Menu
- Decide to enter 'Setup' Menu' as 'Yes'(Enter possible) or 'No'(Enter impossible)
Programme Change
y Decide to change channel or not by setting 'Program Change' as 'Yes'(Change Possible) or 'No'(Change
Impossible) when present source is TV.
- When 'Programme Change' is set to No (Change Impossible)
» Program Key, Numeral Key, List Key, Q.View Key don't work and entering 'Channel Menu' in
the Main Menu OSD is impossible.
» 'Programme' item in 'On Time' menu will be fixed.
Entering 'Setup Menu' in the 'Main Menu' OSD is impossible regardless of 'Setup Menu' item.
»
Advertisement
Table of Contents
