Table of Contents
Advertisement
(Problem from Ver. 1.05)
15.2. 802.1x authentication failure after reboot
The problem of 802.1x authentication failure had been found in connection with 802.1x
authentication PoE Hub. This version improved this problem.
(Problem from Ver. 1.01)
16. Newly Added Functions in Ver. 1.79
16.1. Windows 8 IE10 support
This version supports Internet Explorer 10 (IE10) in Desktop User Interface Mode on
Windows 8. But it does not support IE10 launching from Start Screen in Windows 8 and it
has no evaluations of IE10 for Windows 7.
16.2. ONVIF Ver. 12.12 support
Conformance testing has been passed with ONVIF Device Test Tool Version 12.12.
16.3. Additional function of RTP stream with user data
Additional function of RTP stream with user data is installed in this version. New CGI
category is added as 'userdata.cgi', and this function is available to change its parameter
'RTPUserData' value from default setting 'off' to 'on' as shown below.
http://ip_adr/command/userdata.cgi?RTPUserData=on
For details regarding this function, refer to the instructions for the CGI Command Manual.
16.4. RFC3551 format support for G.726
RFC3551 besides ITU-T formats are supported for G.726 audio codec. Generally RFC3551
format is selected on ONVIF connection.
These two formats are specified by streaming request URI as below.
ITU-T format
rtsp://ip_adr/media/video1
or
rtsp://ip_adr/media/video1?g726=itu-t
RFC3551 format
rtsp://ip_adr/media/video1?g726=rfc3551
The following CGI parameter specifies audio streaming port number for RFC3551.
Unicast: RTSPUcAudioG726RfcPort (default 51004)
Multicast: RTSPMcAudioG726RfcPort (default 61004)
17. Function changed and Problems corrected in Ver. 1.79
17.1. Erase unnecessary data in OSD with Focus indicator and so on
Some parts of previous indications data had remained in OSD with Focus or Zoom indicator.
This version improved this problem.
(Problem from Ver. 1.77)
Sony Corporation
Release Note
11
Advertisement
Table of Contents
