Advertisement
Quick Links
INSTALLATION AND MAINTENANCE INSTRUCTIONS
THE FOLLOWING ARE CAUTIONARY STATEMENTS THAT MUST BE READ AND FOLLOWED
WARNING:
Raritan Engineering Company, Inc. recommends that a qualified person or electrician
in the case of P104E**, install this product. Equipment damage, injury to personnel or death
could result from improper installation. Raritan Engineering Company, Inc. accepts no responsibility
or liability for damage to equipment, or injury or death to personnel, that may result from improper
installation oroperation of this product.
WARNING:
Hazard of Flooding
properly and all hose connections should be double-clamped. Both intake and discharge seacocks
should always be in the closed position when the toilet is not in use. Failure to do so may result in
flooding, property damage and loss of life.
WARNING:
DO NOT install in an area requiring Ignition Protected Devices.
DO NOT operate P104E** series toilets with handle in place, serious bodily injury may occur.
The PHII is a manually operated double action piston
toilet. The PHII can be converted to its electrical
counterpart by adding an electrical conversion kit
part# P104E**
All models are suitable for use in conjunction with our
US Coast Guard Certified Type I flow-thru Marine
Sanitation Devices (MSD), Raritan's Electroscan®
and Purasan®.
Model and Serial # :
** Specify voltage 12 or 24 VDC
L584v0222jlc
PHII
DURING BOTH INSTALLATION AND OPERATION
Any installation made below the waterline must have vented loops positioned
-
Link to online
Warranty
Registration
1-856-825-4900
www.raritaneng.com
1
Advertisement
Related Manuals for Raritan PHII
Summary of Contents for Raritan PHII
- Page 1 P104E**, install this product. Equipment damage, injury to personnel or death could result from improper installation. Raritan Engineering Company, Inc. accepts no responsibility or liability for damage to equipment, or injury or death to personnel, that may result from improper installation oroperation of this product.
-
Page 2: Operation
These may cause damage to the toilet. Using C.P. a bio-enzymatic toilet bowl cleaner (available from Raritan Engineering) will keep the bowl clean and fresh smelling. Recommend Visual Inspection For leaks at toilet and hose connections ... -
Page 3: Maintenance
MAINTENANCE Super Lube (#SL1CC) applied to the piston rod will ® prolong the life of the Piston Shaft Seal. This should be done every spring and fall or more regularly if the head is used frequently. Applying Super Lube to all moving parts is also recommended. - Page 4 5. Secure toilet to surface. • 3/4" I.D. reinforced intake hose • Hose clamps (two for each connection below waterline) RARITAN PHII MARINE TOILET FRONT VIEW, SIDE VIEW AND FOOTPRINT (51) 13 1/2 (343) BOWL TYPE 17 3/8 14 1/4...
- Page 5 Fittings and 90° bends should be kept to a minimum. • In-Line Strainer (Raritan part # 163000) may be installed. This will help prevent clogs. • Discharging untreated sewage is forbidden in all U. S. waters within the three-mile limit.
- Page 6 PARTS FOR RARITAN PHII MARINE TOILET RARITAN INSTALLATION ACCESSORIES Part No. Description Part No. Description 163000 In-Line Strainer 1115 3/8"-16 x 1 1/2" Hex Head S/S Bolt(2) 1124 1/4"- 20 x 1/2" R.H. Machine Screw 1PCP32 C.P., Cleans Potties, Bio-enzymatic, 32 oz.
- Page 7 EXPLODED PARTS VIEW PHII MARINE TOILET 1208W 1218 Seat and Cover 221361 1236E 1210A CH43P 1238SC Marine Seat and Cover 1245SC Household 1210B 1124 1238SC Marine 1210 1236AW 1245SC Household 1218 1209BW 1204B 1216 1216 1202 1217 1203B3 F005 1223B...
- Page 8 White rubber washer (slides loose on piston) (PH and Pre 1992 PHII) 1214 Seal Cartridge (Post 1992 PHII and PH Superflush/Powerflush) 1214A Piston Shaft Seal (install with flat side up) (Post 1992 PHII and PH Superflush/ Powerflush) 1214B "O" Ring (large black thin cross section) (Post 1992 PHII and PH Superflush/...
- Page 9 Inlet Valve/ Handle Orientation and Repair Tools you will need: Channel type pliers. Flatblade (med) screwdriver Gaining access to the inlet valve To clean out debris or dismantle the valve it is necessary to access the inlet valve spring (part# LWS) and ball (#1201). It is only necessary to unscrew the inlet valve cap (part #1204B) approximately 5 revolutions with channel type pliers.
- Page 10 Water rises in bowl Water not being drawn in • Vented loop(s) not breaking siphon • Check Ball Stuck Close discharge seacock, then intake seacock to Shutoff seacock and remove intake hose determine which is causing the problem. Clean or Using an eraser end of pencil be sure check ball is replace vented loop(s) parts.
-
Page 11: Specifications
CONVERTING PHII TO ELECTRIC OPERATION ORDER PART NUMBER P104E** SPECIFICATIONS P104E** Units Require Electrical • Wire Nominal Voltage (Volts DC) • Wire cutters Amperage Draw @ Nominal Voltage • Wire terminal crimpers Circuit Breaker/Fuse Size (Amps) • Terminals Wire Sizes •... -
Page 12: Limited Warranty
THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION PRECEDENT OF WARRANTY COVERAGE. However, please complete and return the owner Registration Card so that Raritan can contact you should a question of safety arise which could affect you.