Related Manuals for Siemens RWD68
Summary of Contents for Siemens RWD68
- Page 1 Adjusting Temperature Setpoint: RWD 68 X1 Value is the current room temperature Y1 Value is the cooling signal, 0=no cooling signal, 10=maximum cooling signal Q1 is the Electric duct heater status...
- Page 2 To adjust the cooling setpoint, press the + button until ‘SP-C’ is on the screen Press ‘SEL’ button, the number value will flash, adjust to desired value using + or – buttons. Press ‘Sel’ button to confirm selection.
- Page 3 To adjust the heating setpoint, press the ‘+’ button until ‘SP-H’ is on the screen Press ‘SEL’ button, the number value will flash, adjust to desired value using + or – buttons. Press ‘Sel’ button to confirm selection. Note: The SP-H value must always be lower than the SP-C value, in some cases, both value may need to be adjusted to select the desired temperature.