If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. How to replace the fuse Open the fuse compartment with a blade screwdriver, and replace the fuse.
Introduction Thank you for choosing this Sony product. Before operating the TV, please read this manual thoroughly and retain it for future reference. • Symbols used in the manual: • Important information. • Information on a feature. • 1,2... Sequence of instructions.
Safety Information This set is to operate on a 220-240V AC supply only. Take care not to connect too many appliances to the same power socket as this could result in fire or electric shock. Do not open the cabinet and the rear cover of the TV.
Page 5
Additional Safety Information • Do not block or cover the ventilation opening situated on the bottom rear of the TV set. For ventilation, leave a space of at least 10 cm from the wall. • If after transporting the TV set, directly from a cold to a warm location, or if the room temperature has changed suddenly, pictures may be blurred or show poor colour over portions of the picture.
Checking the Accessories supplied 2 Batteries (AAA size) 1 Remote control (RM-906) Inserting Batteries into the Remote Control Make sure you insert the supplied batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. Overview &...
2.5 seconds. 5 Selecting VCR double-digit: if Media Selector (w;) is switched to VCR, press this button to select double-digit channels for Sony's VCR e.g. 23, press -/-- first and next the buttons 2 and 3. 6 a) Recording button: If Media Selector (w;) is switched to VCR, press this button to record programmes.
Overview of the TV Buttons Push up the flap on the front left corner of the Video Input jack Headphones jack S video Input jack Overview & Installation Audio Input jacks Remote control receiver To operate the remote control, pont it towards this receiver. Programme Up or Down Buttons...
Connecting the Aerial and VCR • Connecting cables are not supplied. • For more details of VCR connections as well as other connections, please refer to page 24. The Scart lead is optional. If you use this optional connection it can improve picture and sound quality when using a VCR.
Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language of the menu screen 2) Choose the country in which you are going to operate the TV, 3) check how to connect optional equipment to your TV, 4) search and store all available channels (TV Broadcast) and 5) change the order in which the channels (TV Broadcast) appear on the screen.
Page 11
A diagram will appear showing you how to connect a wide range of equipment to your TV set. Follow the instructions and finally press the OK button to remove the picture and continue the automatic process. After the automatic tuning process has finished and the optional equipment has been connected at this stage, we recommend you follow the instructions explained on the section "Connection Guide"...
Introducing and Using the Menu System Your LCD TV uses an On-Screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: To switch on the menu screens: Press the MENU button to switch the first level menu on. To navigate through the menus: •...
The Picture Adjustment Menu Picture Adjustment Picture Adjustment Picture Mode: Picture Mode: Live Contrast: Contrast: Reset Reset Noise Reduction: Noise Reduction: Colour Tone: Cool Colour Tone: Lines correction: Select: Enter: Exit: Back: MENU Picture Mode This option allows you to customise the Picture Mode based on the programme you are watching.
The Sound Adjustment Menu Picture Adjustment Picture Mode: Live Contrast: Reset Noise Reduction: Colour Tone: Cool Select: Enter: Exit: MENU Sound Adjustment Sound Effect: Dolby Virtual Treble: Bass: Balance: Reset Dual Sound: Stereo Auto Volume: TV Speakers: Headphones Set Up Select: Enter: Exit:...
Page 15
Dual Sound PAP Sound * The “BBE High Definition Sound system” is manufactured by Sony Corporation under license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
The Features Menu Picture Adjustment Picture Mode: Live Contrast: Reset Noise Reduction: Colour Tone: Cool Select: Enter: Exit: MENU Features Features Auto Format AV3 Output Connection Guide Select: Enter: Exit: MENU AUTO FORMAT This option allows you to automatically change the aspect ratio of the screen. To do this: After selecting the option, press OK.
AV3 OUTPUT This option allows you to select the source to be output from the Scart connector 3 so that you can record from this Scart any signal coming from the TV or from an external equipment connected to the Scart connector 4 or 4 and If your VCR supports SmartLink, this procedure is not necessary.
The Set Up Menu Picture Adjustment Picture Mode: Live Contrast: Reset Noise Reduction: Colour Tone: Cool Select: Enter: Exit: MENU Set Up Set Up Language Country Auto Tuning Programme Sorting Programme Labels AV Preset Manual Programme Preset Select: Exit: Enter: MENU LANGUAGE This option allows you to select the language that menus are displayed in.
PROGRAMME LABELS This option allows you to name a channel using up to five characters (letters or numbers). To do this: Once you have entered the "Set Up" menu as it is explained in the previous page and after selecting the option, press OK, then press to select the programme number with the channel you wish to name.
MANUAL PROGRAMME PRESET This option allows you to: Preset channels or the VCR channel one by one to the programme order of your choice. To do this: Once you have entered the “Set Up”menu as it is explained on page 18 and after selecting the "Manual Programme"...
PAP (PICTURE AND PICTURE) PAP divides the screen into two to watch two pictures in format 4:3 simultaneously. Switching PAP on and off Press to display PAP. One of the screens will be framed to indicate that this is the active screen. It means that when you want to select the PAP source, you will be doing it in the active screen.
Teletext Teletext is an information service transmitted by most TV stations. The index page of the teletext service (usually page 100) gives you information on how to use the service. To operate teletext, use the remote control buttons as indicated below. Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.
NexTView* *(depending on availability of service). NexTView is an on-screen electronic programme guide, providing you with programme information for different broadcasters. When looking for information you can search by theme (sports, art, etc...) or date. If wrong characters appear when viewing NexTView, use the menu system to enter the “Language” menu (see page 18) and select the same language as the NexTView is broadcasted.
“On” (refer to page 20). Repeat this option for each scrambled signal. **This option is only available depending on the country you have selected in the “Country” menu. Additional Information 8mm/Hi8/ camcorder “PlayStation” is a product of Sony Computer Entertainment, Inc. “PlayStation” is a trademark of Sony Computer Entertainment, Inc.
Connecting Audio Equipment to the TV Conect your audio equipment to the audio output sockets D if you wish to amplify the audio output from TV. Next , using the menu system, select the “Sound Adjustment” menu and set the “TV Speakers” to “One time off” or "Permanent off"...
Remote Control Configuration for VCR or DVD In it’s default condition this remote control will operate the basic functions of this Sony TV, Sony DVDs and most Sony VCRs. To control VCRs and DVDs of other manufacturers (and some Sony VCR models), the remote control needs to be configured.
Optimum Viewing Area For the best picture quality, try to position the TV set so that you can view the screen from within the areas shown below. Horizontal viewing area Vertical viewing area 65º 65º (Optimum viewing position) 30º 30º (Optimum viewing position) Additional Information...
• When the lamp burns out, a noise is audible. This does not indicate damage to the TV set. • Consult your nearest Sony service center to obtain a new lamp. • Always remember to dispose of used lamps in an evironmentally friendly way.
Page 29
Loosen the screw with an object such as a coin and remove the lamp cover. Loosen the two screws and pull out the lamp. Loosen two screws with the hexagon key supplied. The lamp is still extremely hot immediately after the power is turned off. Be careful that you don’t touch the front glass or surrounding area of the lamp or the glass of the lamp compartment.
PC Input Specifications PC Input Timing Input signal frequency: Horizontal: 31,4 - 48,4 KHz. Vertical: 59 - 61 Hz. Maximum Resolution: 1024 dots x -768 lines. Preset mode timing table for PC Nº Resolution Graphic mode (dots x lines) 640 x 480 VESA 60 800 x 600 VESA 60...
Troubleshooting Here are some simple solutions to problems which may affect the picture and sound. Problem No picture (screen is dark) and no sound. Poor or no picture (screen is dark), but good sound. No picture or no menu information from equipment connected to the Scart connector.
26. • Replace the batteries. • Contact your nearest Sony service centre. • Turn the TV off. Turn the TV on again, if the lamp indicator is still lit then replace the internal lamp. For details refer to pages 28 and 29.
Television Channel Number Guide channels Only the main transmitters are listed. Information regarding the regional sub-relay channel numbers can be obtained by contacting The BBC Engineering Information Dept., Telephone Number 020 7852 5040. MAIN TRANSMITTERS BBC1 BBC2 London & South East Bluebell Hill Crystal Palace Dover...