Page 1  For information about the Sony software preinstalled on your computer, click Start in the Windows then click Welcome to VAIO life. computer! Your new computer is a superb blend of high technology and easy-to-use ®...
Page 2: Getting Started
Getting Started Congratulations on your purchase of the Sony VAIO state-of-the-art computer functionality with the latest audio, video and information technology features.  Unpacking Your Computer  Planning an Ergonomic Work Space computer! Your new, high-performance, multimedia computer combines ®...
Page 3: Unpacking Your Computer
Unpacking Your Computer Your computer may not be supplied with all of the accessories shown, depending on the computer configuration purchased. For details on the accessories supplied with your computer, see the online Your VAIO computer is not supplied with System or Application Recovery CDs. Use the VAIO Recovery Wizard utility to ®...
Page 4 Go to the Sony online support Web site at http://www.sony.com/pcsupport. Click the Documentation button and follow the on-screen instructions to locate your model's specifications sheet.  VAIO Software — Provides specific information on certain preinstalled software on your computer. To access this online software information: Click Start in the Windows Click Welcome to VAIO life.
Page 5: Planning An Ergonomic Work Space
Planning an Ergonomic Work Space Before you set up your new computer, find the best location for your new computer and plan your work space. There are several ergonomic factors to consider when you arrange your work space:  Stable work surface — Use a stable work surface large enough to support the computer and other peripheral equipment.
Page 6: Locating Controls And Ports
Locating Controls And Ports This section is intended to familiarize you with the controls, ports and jacks on your computer and supplied accessories. Your computer may not be equipped with all of these hardware features or accessories. The location of the controls, ports, and jacks may vary from the illustrations shown in this section.
Page 7: About The Front Panel
About the Front Panel The front panel of your VAIO Computer enables access to drives, memory card readers, ports and jacks that enable you to ® connect compatible peripheral devices. Page 7...
Page 8 Front panel Your computer may not be equipped with all of these hardware features or accessories. The location of the controls, ports, and jacks may vary from the illustrations shown in this section. Front panel Optical drive 1 See the online Specifications sheet for optical drive information.
Page 9 Optical drive access indicator Light is amber while reading and writing data from and to the optical drives. Hard disk drive access indicator Light is amber while reading and writing data from and to the hard disk. Headphones/Line In jack Connection for the supplied speakers, optional headphones, or audio device.
Page 10 /M ic rodrive s lots . i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on the software programs, operating system, and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other.
Page 11 Page 11...
Page 12: About The Back Panel
About the Back Panel The back panel of your computer contains the ports for supplied and optional accessories. The icons on the back panel locate and identify the ports on your computer. Page 12...
Page 13 Connection for a parallel device, such as a printer or scanner. i.LINK 6-pin S400 port (IEEE 1394) Connection and power for a compatible digital device, such as a Sony Digital Handycam Universal Serial Bus (USB 2.0) ports (4) Connections for compatible high/full/low-speed USB devices.
Page 14 Microphone jack Connection for a microphone (optional). Front/Headphones jack Connection for the supplied speakers (2-channel), front speakers (5.1 speaker system Line In jack Connection for an audio device. Woofer/Center jack Connection for a Sub-woofer , control module, or center speaker (5.1 speaker system Rear jack Connection for rear speakers (5.1 speaker system Monitor port...
Page 15 Connection for a 10BASE-T/100BASE-TX/1000BASE-T Ethernet. (The port marked with (Network) is for LAN connections only.) Speaker DC Out jack Connection for the speaker power cable (supplied 2-channel speakers). Composite audio R In jack Connection for an audio cable (optional). Composite audio L In jack Connection for an audio cable (optional).
Page 16: About The Sub-Woofer
About the Sub-woofer Certain VAIO computers are supplied with a sub-woofer unit to enhance your computer's sound capability. See your ® computer's online specifications sheet for information about supplied accessories. Go to the Sony online support Web site at http://www.sony.com/pcsupport. Page 16...
Page 17 Sub-woofer unit The sub-woofer is compatible with the speakers supplied with your VAIO computer. See the section, Speakers, for connecting instructions. Sub- woofer unit Port The port extends the low frequency response to extend the volume output of the sub-woofer unit. Power knob/volume control Rotate the knob clockwise to turn on the sub-woofer unit.
Page 18: About The Keyboard
About the Keyboard This section describes the special and standard functions available for your keyboard. Page 18...
Page 19 VAIO keyboard with Media Center features The VAIO keyboard supplied with your computer has a standard key arrangement with additional keys and controls that ® support Microsoft Windows XP Media Center Edition features. ® ® VAIO keyboard BUTTON DESCRIPTION EJECT 1 Opens and closes the optical drive 1 tray.
Page 20 NEXT Advances to the next DVD chapter, video track, or audio track. VOLUME knob Increases (+) and decreases (-) the volume as you turn the knob. MUTE Turns the sound off. Press again to restore sound. STANDBY Places the computer in Stand by mode to reduce power consumption. Press any key briefly to resume normal operation.
Page 21: About The Remote Control
About the Remote Control The Media Center remote control is supplied with VAIO Digital Studio computers that are equipped with the Microsoft ® ® Windows XP Media Center Edition operating system. ® Page 21...
Page 22 Remote control The remote control can start and stop video recording and playback, select channels, and set viewing preferences. This section describes the basic functions of your remote control. Rem ote Control MY MUSIC button Press to view and listen to your music playlists. MY TV button Press to view the My TV menu.
Page 23 Press to fast-forward media at three speeds. SKIP button Press to move media forward, for example, one audio track, one DVD chapter, and 30 seconds of recorded TV or video. REPLAY button Press to move media backward, for example, one audio track, one DVD chapter, and seven seconds of TV or video. REW button Press to move media backward at two speeds.
Page 24 STANDBY button Press to place the computer in Stand by mode to reduce power consumption. MY PICTURES button Press to view pictures or a slide show. MY VIDEOS button Press to view videos from your video collection. MORE button Press to view additional options that are available for Media Center features. Directional arrow buttons Press the Up, Down, Left, and Right arrow buttons to move the pointer on the screen.
Page 25 Press to activate feature or action, such as channel selection or return to previous channel. (This button's actions are similar to using the OK button.) Page 25...
Page 26 Setting up the remote control Turn the remote control over. Press in the tab and lift the battery cover up. Insert two AA batteries (supplied) into the remote control as shown. Align the battery cover to the remote control. Press down until the cover clicks into place. Inserting batteries into the rem ote control If your remote control does not operate properly, you may need to replace the batteries.
Page 27: About The I.link Port
About the i.LINK Port Your VAIO computer is equipped with a 4-pin and a 6-pin i.LINK port. A 4-pin i.LINK port cannot supply power to a ® ® connected i.LINK device. A 6-pin i.LINK port can supply power (10V to 12V) to a connected i.LINK device, if the device is equipped with a 6-pin connector.
Page 28 Connecting an i.LINK (IEEE 1394) device Use the symbol to locate the i.LINK port on your compatible i.LINK device and on your computer. Plug the i.LINK cable connector into this port. Plug the other end of the cable into the corresponding 4- or 6-pin i.LINK port on your computer. See the instructions supplied with your i.LINK device for more information on installation and use.
Page 29: Setting Up Your Computer
Setting Up Your Computer Your computer may not be equipped with all of the hardware features described in the section. The location of the controls, ports, and jacks may vary from the illustrations shown. See the online hardware configuration.  Connecting a Display (Monitor) ...
Page 30: Connecting A Display (Monitor)
Connecting a Display (Monitor) Plug the display's cable into the appropriate monitor port. If necessary, plug the display's cable into the rear of the display. To connect a display Install your equipment so that you can easily reach the power outlet in the event of an emergency. Page 30...
Page 31: Connecting The Speakers
2-channel speakers. Certain models are supplied with a sub-woofer unit or 5.1 ® speaker systems . For information about supplied accessories, go to the Sony online support Web site at http://www.sony.com/pcsupport to view your computer's specifications sheet.
Page 32 Insert the mini stereo plug from the sub-woofer unit's cable into the Headphones jack, located on the back panel of your computer. You can also plug the sub-woofer's mini stereo plug into the headphones jack located on the lower front panel of your computer.
Page 33: Connecting 5.1 (6-Channel) Speaker Systems
Connecting 5.1 (6-Channel) Speaker Systems Certain VAIO computers that are configured-to-order (CTO), are supplied with a 5.1 speaker system, or you may wish to ® use your 5.1 (6-channel) speaker system. Speaker configuration can vary, depending on the speaker components used. To set up the speakers with your computer: ...
Page 34: Configuring Software For Your Speaker System
Configuring Software for Your Speaker System When using 5.1 (digital or analog) speaker systems, certain software programs require setting changes to enable proper audio performance. To configure RealTek Sound Effect Manager software ® For 6 channel-analog speakers Click Start in the Windows ®...
Page 35 To configure WinDVD software Click Start in the Windows ® Point to InterVideo WindDVD 5, and the click on InterVideo WinDVD 5 for VAIO. The InterVideo WinDVD for VAIO window opens. Right-click in the WinDVD window. A shortcut menu appears. Click Setup..., to view the Setup dialog box.
Page 36: Connecting The Keyboard And Mouse
Connecting the Keyboard and Mouse Plug the keyboard cable into the keyboard port on the back of the computer. Plug the mouse cable into the mouse port on the back of the computer. To connect the keyboard and m ouse Page 36...
Page 37: Connecting The Telephone And Modem
Connecting the Telephone and Modem Your computer is equipped with a single modem line jack to connect your installed modem with your telephone wall jack. To use your wall jack for both telephone and modem lines, purchase an additional RJ-11 telephone cable and a "1-to-2" jack adapter device (splitter).
Page 38: Connecting The Power Cords
Connecting the Power Cords Plug the power cord into the back of the computer. Plug both the display and computer power cords into a grounded AC wall outlet or a power strip. To connect the power cords Page 38...
Page 39: Turning On Your Computer
Turning On Your Computer When you start your computer for the first time, your computer may detect new equipment and display a dialog box that prompts you to restart your computer. Respond to this prompt immediately. Before turning on your computer, set up the cables and connections required to use Microsoft Center Edition features.
Page 40: Setting Up Media Center
Setting Up Media Center Your VAIO Digital Studio computer has the Microsoft ® computing experience. Media Center provides you with a wide range of TV, DVD, and video viewing, as well as music recording and playback. This section describes how to set up your TV, set-top box, and other equipment. ...
Page 41: Setting Up Tv Connections
Setting Up TV Connections The best method of connecting your computer, TV monitor or display, and TV programming access, is determined by the type of cable service connection available in your home. Your computer's hardware configuration may vary from the illustrations shown in this section.
Page 42 Connecting to standard cable access (CATV) Option 1 Connect one end of the TV coaxial cable (supplied) to your cable service access. Connect the other end of the TV coaxial cable to the VHF/UHF port on the back panel of your computer. To connect in CATV m ode (Option 1) Option 2 Connect one end of a TV coaxial cable (optional) to your cable service access.
Page 43 Connecting to a standard antenna (air) system You can connect your computer to an indoor/outdoor antenna system, using Option 1 or 2 from the previous section, Connecting to standard cable access (CATV) combiner/transformer (optional) to connect your computer and the indoor/outdoor antenna system. If you are connecting to an indoor/outdoor antenna system, you may need to reorient the antenna for better reception.
Page 44 Connecting a Cable or Satellite Set-top Box You can connect your computer to cable or satellite service that requires a set-top box. Option 1 Connect one end of a TV coaxial cable (optional) to your cable service access. Connect the other end to the In jack on the back panel of your set-top box.
Page 45 You can connect your computer to a set-top box using an S-video cable (optional) and an audio cable (optional) instead of a stereo A/V dubbing cable (optional). See Connecting Other Devices. Page 45...
Page 46: Connecting The Remote Sensor And Remote Sensor Control
Connecting the Remote Sensor and Remote Sensor Control The remote sensor communicates with the Media Center remote control, enabling you to change channels and to perform other functions. If you are using a cable or satellite set-top box, you can attach the remote sensor control which enables you to control the set-top box with the Media Center remote control.
Page 47 To connect the remote sensor Connect the remote sensor unit to a USB port located on either the front or back panel of your computer. Position the remote sensor to enable unobstructed communication with your remote control. Connecting the rem ote sensor (back panel) Page 47...
Page 48 To connect the remote sensor control Plug the remote sensor control's cable into either jack (1 or 2) located on the back of the remote sensor. When you attach the remote control sensor to a cable or satellite set-top box, you can control the set-top box functions with your remote control.
Page 49: Connecting Other Devices
Connecting Other Devices This section illustrates how to connect other devices to your VAIO Digital Studio and video connection capability. You can locate the appropriate connections on the back panel or behind the lower bottom panel on the front of the computer. You can connect a VCR or camcorder, using the composite audio In jacks. Your VCR or camcorder may have either standard video or S-video connection capability.
Page 50 Connecting a TV monitor (display) Connect the video connector end of the video cable adapter panel of your computer. Connect the jack end of the video cable adapter to either end of a video cable (optional). Connect the other end of the video cable to the Video-In jack on your TV monitor or display, located on either the side or back of your TV monitor/display.
Page 51: Registering Your Computer
Registering Your Computer Register your computer and take advantage of Sony's commitment to quality customer support. Page 51...
Page 52 About the benefits of registering with Sony  Sony Customer Support — Communicate with a Support Representative to troubleshoot problems you may be having with your computer.  Limited warranty — Protect your investment. See the Limited Warranty Card for more details.
Page 53: Turning Off Your Computer
Turning Off Your Computer Follow these steps when you are ready to turn off your computer for an extended period of time. To avoid loss of data, do not use the Power button to turn off the computer. Page 53...
Page 54 To turn off your computer Click Start in the Windows ® The Turn Off Computer dialog box appears. Select the Turn Off option. Respond to any prompts about saving your documents. Wait for your computer to turn off automatically—the power indicator light turns off. Turn off any peripheral devices connected to your computer.
Page 55 About the power button If your computer stops responding, press and hold the Power button for more than six seconds to force your system to shut down. You may need to repeat this procedure if your computer does not shut down on the first attempt. Page 55...
Page 56 Using Memory Cards and Memory Card Readers This section provides basic information about using your computer's installed memory card readers. Your computer may not be equipped with all of the memory card readers described in this section, depending on the computer model or configuration purchased.
Page 57 About Your Memory Card Readers Your VAIO computer is equipped with memory card readers that are compatible with many popular types of memory cards. ® You can use your computer's memory card readers to transfer data between digital cameras, camcorders, music players, and other audio/video devices.
Page 58: Inserting A Memory Card
Inserting a Memory Card The memory card readers are located on the front of your computer, behind a protective panel. Opening the front panel cov er Locate the appropriate drive for the memory card you want to use. Insert the memory card into the drive, in the direction of the arrow on the media. Do not force the card into the drive.
Page 59: Removing A Memory Card
Removing a Memory Card The correct way to remove a memory card from a memory card reader varies, depending upon the card in use. Use care when removing a memory card to avoid damage to the reader or card. Do not remove a memory card while the media access indicator light is on. The card or its data may become damaged.
Page 60: About Memory Stick Media
— Provides the same features and benefits of MagicGate form that is 1/3 smaller in size. Compatibility between software programs and Memory Stick media formats may vary. At this time, Sony suggests using only MagicGate Memory Stick media to store and transfer any data created with SonicStage...
Page 61 Sharing Memory Cards If you plan to share your memory card between your VAIO the card must be formatted properly.  Format the memory card by using it in the device first. See the information supplied with the device for details how to format the memory card.
Page 62 Upgrading and Maintaining your VAIO Computer In the future you may want to increase the functionality of your VAIO computer. This section describes how to perform basic upgrades and maintenance on your computer.  Overview  About Opening the Computer ...
Page 63 Overview The upgrading procedures described in this section assume that you are familiar with the general terminology associated with personal computers, safety practices, required regulatory compliances, and the modification of electronic equipment. Page 63...
Page 64 Before upgrading your computer Disconnect the computer from its power source and from telecommunications links, networks, or modems before you open the unit or follow any procedures described in this section. Failure to disconnect your computer from its power source may result in personal injury or equipment damage. Always turn the power off before you open the computer or connect your computer to peripheral equipment.
Page 65 About Opening the Computer Removing the top cover Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and disconnect any peripheral devices. Locate the two tabs on the top edge of the back panel. Gently lift these tabs and slide the top cover towards the back of the unit.
Page 66 About Opening the Computer Removing the top cover Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and disconnect any peripheral devices. Locate the two tabs on the top edge of the back panel. Gently lift these tabs and slide the top cover towards the back of the unit.
Page 67 Removing the side panel Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and disconnect any peripheral devices. Press the release button on the top edge of the side panel. Rem ov ing the side panel Lift the side panel away from the unit and set aside.
Page 68 About Closing the Computer Replacing the side panel Align the tabs on the bottom of the side panel to the tracks on the edge of the chassis frame. Gently press the side panel against the chassis, until the release button locks the panel back into place. Replacing the side panel Page 68...
Page 69 About Closing the Computer Replacing the side panel Align the tabs on the bottom of the side panel to the tracks on the edge of the chassis frame. Gently press the side panel against the chassis, until the release button locks the panel back into place. Replacing the side panel Page 69...
Page 70 Replacing the top cover Align the tracks on the top cover to the tracks on the chassis frame. Gently slide the top cover forward onto the chassis, until the back panel tabs lock the panel into place. Replacing the top cov er Page 70...
Page 71 9.05 inches. Add-on card configuration varies by model. Some models, such as Configure-to-Order (CTO) computers, may have all expansion slots filled. Observe the proper safety precautions when you add cards to your Sony computer. See Before upgrading your computer.
Page 72 Installing an add-on card Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Gently place the unit on its side and remove the side panel. See Locate an available expansion slot. Remove the slot cover's screw, and then remove the slot cover. When removing a slot cover, be careful not to damage components on the system board or add-on cards.
Page 73 Attach any internal cables that the card requires. See the instructions supplied with the add-on card. Replace the side panel. See About Closing the Reconnect the power cord and all peripheral devices. Turn on the computer. Computer. Page 73...
Page 74: Installing Memory
Installing Memory The amount of preinstalled memory may vary, depending on the computer purchased. Your computer may ship with all available memory slots filled. For memory replacement or upgrades, use the correct memory module for your computer's configuration. See the online Specifications sheet for details about the memory installed in your computer.
Page 75 Removing a memory module Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and all peripheral devices. Gently place the unit on its side and remove the side panel. See If necessary, remove any cables, add-on cards, or other components to access the memory module slots. Locate the memory module(s) you wish to remove.
Page 76 Installing a memory module Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Gently place the unit on its side and remove the side panel. See If necessary, remove any cables, add-on cards, or other components to access the memory module slots. Remove the memory module from its anti-static package, handling it by the the edges.
Page 77: About The Lithium Battery
About the Lithium Battery The lithium battery starts to weaken after several years and the system settings, such as the date and time stored in CMOS RAM, may become inaccurate. Replace the lithium battery when this occurs. There is danger of the battery exploding if it is replaced incorrectly. Replace the battery only with a CR2032-type lithium battery.
Page 78 Dispose of the lithium battery properly. In some areas, the disposal of lithium batteries in household or business trash may be prohibited. You can return your unwanted lithium batteries to your nearest Sony Service Center or Factory Service Center. To locate a Service Center near you, visit the Sony online support Web site at http://www.sony.com/pcsupport.
Page 79 Resetting the computer's date and time To reset your computer's date and time: Double-click the time readout displayed in the Windows properties window appears. From the Date & Time tab, change the settings as desired. Click Apply, and then click OK. Taskbar Notification area.
Page 80: About Hard Disk Drive Installation
About Hard Disk Drive Installation Your computer may be equipped with open internal bays to hold additional 3.5-inch hard disk drives. When you install an additional hard disk drive, the method of attaching connectors and cables may be different from the instructions described in this section.
Page 81 Replacing the original hard disk drive If you replace the original, factory-installed hard disk drive, you may need to correct your drive mapping, create a VAIO Recovery Media Kit, or visit the Sony online support Web site for more information. About drive mapping...
Page 82 Installing an additional hard disk drive Shut down your computer and turn off all peripheral devices, such as your printer. Unplug your computer and any peripheral devices. Gently place the unit on its side and remove the side panel. See Detach the power and interface cables from the original hard disk drive that is preinstalled in your computer.
Page 83 10. Push the drive holder handle down to lock the drive into position. 11. Reconnect the SATA and power connectors to the original drive. 12. Connect another SATA interface cable between the new drive and an unused SATA port on the motherboard. 13.
Page 84 Identifying the additional hard disk space When you initialize the new hard disk, it must be configured as an extended partition in Windows NT file system (NTFS) format. Log on to Windows as Administrator. ® Click Start in the Windows taskbar, then right-click My Computer. A shortcut menu appears. Select Manage.
Page 85 About RAID Systems When multiple hard disk drives are combined, they can provide an affordable answer to your VAIO or security requirements. This solution is called a Redundant Array of Independent Disks capability is available only for configure-to-order (CTO) computer systems. See your computer's specifications sheet for details on your computer's hardware configuration.
Page 86: Raid Overview
Your VAIO computer's drive bay can accommodate a total of four S-ATA hard disk drives. If you are installing your own equipment, Sony suggests using hard disk drives that are identical in size and manufacture. computer with one of the following options: ®...
Page 87 Reasons for using a RAID array system When hard disk drives are grouped together in a RAID array, they are configured, formatted, and managed to perform in a specific way. Your computer's data is spread across these drives in a manner that determines the level of RAID performance and protection.
Page 88 RAID array organization A single hard disk drive has two basic functions — writing and reading data. These functions are handled differently when using a RAID array. A RAID array is organized from the physical drives into a physical array. (The hard disk drives are combined into the array.) These physical arrays are then formatted into a single, logical drive, which communicates with your computer.
Page 89: About Raid Levels
About RAID Levels RAID is intended to protect data and create fault tolerance. Important factors such as availability, reliability, fault tolerance, and performance, are essential to selecting a RAID level that meets your computing needs. Page 89...
Page 90 RAID-0 This RAID level uses striping without parity. Striping breaks data into small pieces and then simultaneously writes or reads to multiple locations. This increases your computer's performance and data storage capacity. RAID- 0: Striping without parity Best uses for RAID-0 This RAID level is appropriate for situations where read/write performances is more important than data security.
Page 91 RAID-1 This RAID level uses mirroring. Mirroring writes all data onto each hard drive in the RAID array, in exactly the same way. Your computer's reading performance is improved, while writing performance is slower, in comparison to a single hard disk drive.
Page 92: Configuring A Raid Array
Configuring a RAID Array Certain VAIO computers are available for purchase as RAID-0 or RAID-ready. The number of preinstalled S-ATA hard disk ® drives can vary, depending on the hardware configuration purchased. These computers are configured-to-order (CTO), based on your hardware requirements. See your computer's specification sheet for details about your specific hardware configuration.
Page 93 Before getting started  Back up your computer's data to external media. Creating, altering, or configuring for RAID deletes all data from affected hard disk drives.  Create a VAIO Recovery Media Kit, so that you can configure the RAID volumes, and perform a hard disk drive recovery.
Page 94 Installing additional hard disk drives If you have purchased a RAID-ready computer, you may be required to install an additional drive(s). You can find details about installing additional hard disk drives in the Place all S-ATA hard disk drives into the drive holder inside the computer's chassis. Connect one end of the S-ATA data cable(s) to the S-ATA connection, starting with Port-0 on the motherboard.
Page 95 Using the RAID Configuration Wizard The RAID Configuration Wizard can configure two installed hard disk drives for RAID-0 or RAID-1 levels. You can also use the RAID Configuration Wizard to change your computer's RAID array to RAID-0 or RAID-1. Press the power switch on the computer to turn on the computer. Open the optical drive, and place the Startup Recovery Disc from the Recovery Media Kit into either optical drive.
Page 96 If you are using hard disk drives that vary in size, note that the RAID configuration is set to the size of the smallest drive. 10. Select one of the three options, and click Next. A final confirmation message appears. If you have not performed a back up of your computer's data, or you do not want to continue with the RAID configuration, respond to the final confirmation message by clicking "No"...
Page 97 Using the VAIO Recovery Wizard utility program A complete hard disk drive recovery restores the original, factory settings and recovers all of the preinstalled software programs. From the VAIO Recovery Wizard main window, click Next. Select Custom Recovery (for Advanced Users), and click Next. Select either option, as shown below, and then click Next.
Page 98 About the Intel Storage Utility program You can find information about RAID volume configuration in the Intel the Intel Application Accelerator RAID edition feature. ® Locating the Intel Storage Utility program Click Start from the Windows From the Control Panel window, click From the Performance and Maintenance window, click The Intel Storage Utility main window appears.
Page 99 The Intel Application Accelerator Help file provides basic information on setting up additional hard disk drives as ® a RAID array. You can find more information on this topic at http://support.intel.com/support/go/iaa/kb_r.htm. Page 99...
Page 100 RAID Glossary This glossary contains some basic terms that may aid your understanding of RAID technology. Term Definition Array Two or more hard disk drives that are grouped together and function as a single drive to the host computer. Fault tolerance The ability of a computer to continue its function, even after one or more hard disk drives have failed.
Page 101: Troubleshooting
Troubleshooting This section describes how to solve common problems and provides helpful information about using your computer's hardware features and preinstalled software. Your computer may not be equipped with all of the features or software discussed in this section, depending on the computer model or configuration purchased. ...
Page 102: About Vaio Computer Functions
About VAIO Computer Functions My computer does not start.  Verify that the computer is plugged into a power source and that it is turned on. Check that the power indicator is lit on the front panel of the computer. ...
Page 103 About VAIO Computer Functions My computer does not start.  Verify that the computer is plugged into a power source and that it is turned on. Check that the power indicator is lit on the front panel of the computer. ...
Page 104 What can I do if my computer or software stop responding? You can try to locate and close the software program that has stopped responding. Press the Ctrl+Alt+Delete keys. The Windows Task Manager window appears. From the Applications tab, locate the software program that has the status message, "Not responding." Select the software program that has a Not Responding status and click End Task.
Page 105 Why does the Windows operating system stop responding during shutdown? The Windows operating system may not shut down properly for many reasons, including incompatible or conflicting drivers, damaged files, or non-responsive hardware. For troubleshooting information, you can search Windows Help. Click Start in the Windows taskbar and select Help and Support.
Page 106 Why is my computer running slowly?  The computer's responsiveness varies depending with the number of software programs that are open and running. Close any programs that you are not currently using.  Increasing the computer memory may also help. For information on installing memory, please see the online VAIO User Guide.
Page 107 How do I change the video resolution of my display? Click Start in the Windows taskbar, and then select Control Panel. Select Appearance and Themes, and then select Change the screen resolution. Click the Settings tab. Change the Screen resolution and Color quality to the desired levels. Click Apply and then click OK.
Page 108 Why doesn't my computer resume normal operation from Stand by mode?  If your keyboard has a Stand by key  If your keyboard is not equipped with a Stand by key, press any key to resume normal operation.  For troubleshooting information, you can search Windows Help.
Page 109 About System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against ®...
Page 110 About System Security This section provides information about keeping your computer operating smoothly and protecting against potential threats to your computer's security. How can I protect my computer against security threats, such as viruses? The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against ®...
Page 111 How do I keep my preinstalled antivirus software updated? You can keep the preinstalled Norton Internet Security Corporation. To download and install the latest security update Double-click the Norton Internet Security icon If you have not previously registered the antivirus software, a series of information wizards appear. Follow the on-screen instructions to complete each wizard Double-click the Norton Internet Security icon again.
Page 112: About Media Center
About Media Center The Microsoft Windows XP Media Center Edition operating system is not installed on all VAIO Digital Studio computers. ® ® ® See your online specifications sheet for more information about your computer's configuration. Why doesn't the REW button on the remote control work when I use My Music? The REW button does not "rewind"...
Page 113 About Media Center The Microsoft Windows XP Media Center Edition operating system is not installed on all VAIO Digital Studio computers. ® ® ® See your online specifications sheet for more information about your computer's configuration. Why doesn't the REW button on the remote control work when I use My Music? The REW button does not "rewind"...
Page 114 Why aren't the song information edits I made using SonicStage software shown in My Music? If you record a song in OpenMG ATRAC format and make edits, such as title, artist, or genre, using SonicStage software, the changes become visible when the music file is played in My Music. If you make changes to a music file using Media Center, the changes are not visible when played in SonicStage software.
Page 115 Why do my song information edits revert to the original content when I use My Music? When you record songs with SonicStage software, and then use Windows Media Player software to edit the song's ® information, you may not see your changes when you play the song in My Music. Windows Media Player supports playback of songs recorded in OpenMG (ATRAC3 or ATRAC3+ ) format, but does not support any edits made to the OpenMG format music files.
Page 116 Why do my optimized music files take so long to appear in My Music? When you use SonicStage software to optimize music files to ATRAC3 or ATRAC3+ format, it may take a few moments for the music files to be available in My Music. To access these files sooner, start Windows Media Player software first, and then play the song with My Music.
Page 117 Why do I get the error message, "The input media is invalid" when I try to play an MP3 file in My Music? If you have added cover art to the MP3 file using SonicStage software, your file may contain an unsynchronized ID3v2 header.
Page 118 Why won't My Music show the albums (playlists) I recorded with SonicStage software? Playlists (albums) recorded with SonicStage software may not be immediately available in the Media Center Album window. To access these files sooner, start Windows Media Player software first, and then play the song with My Music. ®...
Page 119 Why did my Click to DVD software recording session capture television instead of video? If Media Center starts a scheduled TV recording while you are capturing analog video with Click to DVD programming may be captured instead of the video and the timed recording may fail. Media Center and the analog capture feature of Click to DVD software both require the use a TV tuner/MPEG encoder card and cannot access the card at the same time.
Page 120 Why can't I view or record a movie when my computer is connected to an external device, such as a VCR or DVD player, or when I am using an analog input connection? If you see a blue background in the View window, the movie may be copyright-protected. Your computer is not able to display or record a video or DVD that is copyright-protected by Macrovision or CGMS-A (Copy Generation Management System - Analog).
Page 121 Why can't I fast forward or rewind a video? The rewind and fast forward features are not supported by all video formats. Try using the Skip or Replay buttons, which provides a similar function. Page 121...
Page 122 How do I use the Media Center software or remote control to adjust my monitor when viewing TV programs? Media Center software and remote control do not have video adjustment capability. Use the controls on the monitor to adjust video settings, such as contrast, hue, and brightness. See the information provided with your monitor for instructions on adjusting its video controls.
Page 123 What can I do if my computer freezes and restarts while I'm watching a DVD or live TV? Verify that the monitor refresh rate is set to 60 Hz, using the following steps: Right-click on the desktop, and click Properties from the shortcut menu. The Display Properties window appears.
Page 124: About Giga Pocket Personal Video Recorder
About Giga Pocket Personal Video Recorder Certain VAIO computers are equipped with Giga Pocket ® information on troubleshooting for Giga Pocket hardware and software features. Why can't I see an image or an image that is displayed properly when I am using a VCR? Some images from an externally-connected video player device or a video game console, may not display or are not displayed correctly.
Page 125 About Giga Pocket Personal Video Recorder Certain VAIO computers are equipped with Giga Pocket ® information on troubleshooting for Giga Pocket hardware and software features. Why can't I see an image or an image that is displayed properly when I am using a VCR? Some images from an externally-connected video player device or a video game console, may not display or are not displayed correctly.
Page 126 Why does my Giga Pocket viewing window or the images played back from a Video Capsule, appear distorted or corrupted? There are some situations where screen or image distortion may occur, such as:  When you change the channel on the video player device. ...
Page 127 Why does my computer seem to slow down when I play a Video Capsule? Your computer may respond slower if you try to play back a Video Capsule while recording a TV program with Giga Pocket. During a timer recording, Giga Pocket may interrupt or stop your Video Capsule playback to prioritize your computer's resources for the timer recording.
Page 128 Why did I get the error message, "Event buffer of audio overflow?" The timer recording may fail in certain situations, such as:  The coaxial cable (input) is disconnected after recording has started.  The TV channel has lost broadcast signal during the recording session. ...
Page 129 Why did my on-screen display shift or split? Your on-screen display may shift or split in rare instances. If this should occur, switch the TV/Recording deck and the playback deck, or try switching the channel. Your timer recording continues even if the on-screen display has shifted or split.
Page 130 Why can't I create new Video Capsules? You cannot create new Video Capsules when the remaining free space on your hard disk drive reaches approximately 100 MB. Delete any unnecessary Video Capsules or files to increase the free space on your hard drive. Page 130...
Page 131: About The Mouse And Keyboard
About the Mouse and Keyboard Why doesn't my mouse work properly?  Confirm that the mouse is plugged securely into the mouse port. If you are using a USB mouse, verify that the mouse is plugged securely into the appropriate USB port. ...
Page 132 About the Mouse and Keyboard Why doesn't my mouse work properly?  Confirm that the mouse is plugged securely into the mouse port. If you are using a USB mouse, verify that the mouse is plugged securely into the appropriate USB port. ...
Page 133 How do I set up my mouse for left-hand use? Click Start in the Windows taskbar, then click Control Panel. Click Printers and Other Hardware, then click Mouse. The Mouse Properties dialog box appears. From the Buttons tab, select Switch primary and secondary buttons under the Button Configuration options. Click Apply, then click OK.
Page 134 Why doesn't my keyboard work properly?  Check that the keyboard is securely plugged into the keyboard port.  Save and close all open software programs. Turn off your computer, wait approximately 10 seconds, and then restart your computer.  If you are using a wireless keyboard: ...
Page 135: About The Modem
About the Modem Why is my modem connection slow? Many factors can influence modem connection speed, such as:  Telephone line noise.  Incompatibility with other telephone equipment such as fax machines or other modems.  Internet Service Providers (ISP) connection capability may vary. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, check the following: ...
Page 136 About the Modem Why is my modem connection slow? Many factors can influence modem connection speed, such as:  Telephone line noise.  Incompatibility with other telephone equipment such as fax machines or other modems.  Internet Service Providers (ISP) connection capability may vary. If you think your modem is not connecting properly to other PC-based modems, fax machines, or your ISP, check the following: ...
Page 137 Check that the access telephone number (POP) is correct.  All software programs that are preinstalled by Sony are compatible with your computer's modem. If you have installed other software, contact the software publisher for information on how to configure the software in order to recognize the modem.
Page 138 How do I change my modem to rotary or touch-tone dialing? Click Start in the Windows taskbar, then click Control Panel. Click Printers and Other Hardware, then click Phone and Modem options. From the Dialing Rules tab, click Edit. The Edit Location dialog box appears. Select the Tone or Pulse option.
Page 139 How do I set up a dial-up connection? After you have connected your computer's modem to a telephone wall jack, follow these steps to set up your dial-up connection to the Internet: Click Start from the Windows taskbar and select All Programs. Point to Accessories, point to Communications, and then click New Connection Wizard.
Page 140: About The Speakers
About the Speakers Why is there no sound in any software program?  Check that the speakers are plugged into the Headphones jack.  If your speakers have a mute button, verify that it is turned off.  If your speakers are powered by batteries, verify that the batteries are inserted properly and that they are charged.
Page 141 About the Speakers Why is there no sound in any software program?  Check that the speakers are plugged into the Headphones jack.  If your speakers have a mute button, verify that it is turned off.  If your speakers are powered by batteries, verify that the batteries are inserted properly and that they are charged.
Page 142 Why is the S/PDIF option disabled in the Microsoft S/PDIF is enabled in Media Center setting is not selected in the InterVideo To change audio settings in the WinDVD software program Click Start in the Windows ® Point to InterVideo WindDVD 5, and the click on InterVideo WinDVD 5 for VAIO. The InterVideo WinDVD for VAIO window opens.
Page 143 Why can't I hear dialogue during DVD movie playback, using my 5.1 channel  Verify that your speaker system is connected correctly.  Change the computer's audio settings to 6-channel, to match your 5.1 speaker system.  Change the audio settings in the RealTek ...
Page 144 About Using a Microphone Why doesn't my microphone work properly? Check that the microphone is plugged into the Microphone jack. Page 144...
Page 145 About Using a Microphone Why doesn't my microphone work properly? Check that the microphone is plugged into the Microphone jack. Page 145...
Page 146 Why is my microphone so sensitive to background noise? If you find there is too much background noise when you record sound, you should adjust the microphone by following these steps: Click Start in the Windows taskbar, then click Control Panel. Click Sounds, Speech, and Audio Devices, then click Sounds and Audio Devices.
Page 147: About Using Peripheral Equipment
About Using Peripheral Equipment How do I install a printer?  Connect your USB or IEEE 1394 printer to the appropriate port on your computer's front, back or side panels your printer has a USB, IEEE 1394, or infrared connection, contact the printer manufacturer for information or updates that may be required for proper installation.
Page 148 About Using Peripheral Equipment How do I install a printer?  Connect your USB or IEEE 1394 printer to the appropriate port on your computer's front, back or side panels your printer has a USB, IEEE 1394, or infrared connection, contact the printer manufacturer for information or updates that may be required for proper installation.
Page 149 The connected printer does not function properly when the computer resumes from a power saving mode.  Clear the printer memory by turning the printer off for approximately 10 seconds, and then turning it back on.  If your printer does not resume normal operations, try restarting your computer. Page 149...
Page 150: Notes On Use
Notes On Use The information in this section provides basic procedures for handling your computer and common peripheral devices, and using storage media.  About the Power Source  About Handling the Computer  About Using Giga Pocket Personal Video Recorder ...
Page 151: About The Power Source
About the Power Source Before opening your computer, turn the computer off and let it cool down for 10 minutes. This protects you against internal components that may be too hot to handle.  Your computer operates on 100-120 V AC 50/60 Hz only. ...
Page 152 Your computer, keyboard, and mouse consist of high-precision electronic parts. Do not drop them or bump them against other objects.  Your Sony computer does not work with party lines, cannot be connected to a coin-operated telephone, and may not work with multiple telephone lines or a private branch exchange (PBX). ...
Page 153  Use the CONNECT buttons on the wireless device and your computer, if available, to establish communication between the equipment.  Avoid using radio-controlled toys or equipment, CB radios, and other wireless devices in the area near your wireless keyboard. These other devices may cause interference, causing your wireless keyboard or mouse to stop working properly.
Page 154 About Using Giga Pocket Personal Video Recorder Certain VAIO computers are equipped with Giga Pocket ® information on using the Giga Pocket hardware and software features. Display setup Verify your display's settings before using Giga Pocket Personal Video Recorder:  Color quality: Use factory default settings (32-bit).
Page 155: About Handling A Monitor (Display)
About Handling a Monitor (Display)  DVD playback and certain video-related software may not function correctly when your monitor is set to a high refresh rate. If your monitor does not play back video content properly, try setting the display to a lower refresh rate.
Page 156: About Disposing Of The Lithium Battery
Do not handle damaged or leaking lithium batteries. The lithium battery may explode if mistreated. Do not disassemble it or dispose of it in fire. Replace the battery with a Sony CR2032 lithium battery. Using a type of battery other than a CR2032 may present a risk of fire or explosion.
Page 157 CompactFlash ® (SD) media cards. See your computer's specifications sheet at http://www.sony.com/pcsupport, for more information about your computer's media card slot configuration. Visit the Sony online support Web site regularly for the latest information on compatible memory cards. ...
Page 158: Support Options
Support Options Sony provides several options to help solve common problems or to locate support for your VAIO describes all available resources and offers suggestions on how to access this information for maximum results.  Immediate Help and Support ...
Page 159: Immediate Help And Support
VAIO Software — This feature provides specific information on preinstalled software on your computer. To access this online software information Click Start in the Windows taskbar. Click Welcome to VAIO life. Y ou c an loc ate the online H elp for Sony s ubmenu. taskbar, then click Help and Support. ®...
Page 160: Software Help And Support
Software Help and Support Support information for the preinstalled software on your computer is located in this section. Sony software support is free of charge for 90 days after the original date of purchase. Your computer may not be supplied with all of the software discussed in this section, depending on the computer purchased.
Page 161 Norton Internet Security (90 day trial version) Symantec Corp. Web site http://www.symantec.com/techsupp PictureGear Studio Sony Electronics Inc. Web site http://www.sony.com/pcsupport telephone 888-4-SONY-PC (888-476-6972) hours 7 days a week, 24 hours a day Quicken New User Edition ®...
Page 162 Web site http://support.sonic.com SonicStage Sony Electronics Inc. Web site http://www.sony.com/pcsupport telephone 888-4-SONY-PC (888-476-6972) hours 7 days a week, 24 hours a day SonicStage Mastering Studio Sony Electronics Inc. Web site http://www.sony.com/pcsupport telephone 888-4-SONY-PC (888-476-6972) hours 7 days a week, 24 hours a day...
Page 163 hours 7 days a week, 24 hours a day WinDVD for VAIO ® ® InterVideo, Inc. Web site http://www.intervideo.com/jsp/Support.jsp telephone 510-651-0888 Page 163...
Page 164: Resources For Additional Help And Support
Sony online support Web site Online help and support are available 24 hours a day, seven days a week, when you visit the Sony online support Web site. You can access the Web site at http://www.sony.com/pcsupport.

This manual is also suitable for:

Vgc-ra822g vaio Vgc-ra825g vaio Vgc-ra825gy vaio Vgc-ra826g vaio Vgc-ra828g vaio Vgc-ra920g vaio

Sony VGC-RA820G VAIO User Manual

Quick Links

Related Manuals for Sony VGC-RA820G VAIO

Summary of Contents for Sony VGC-RA820G VAIO

This manual is also suitable for:

Table of Contents