hit counter script
Download Print this page
IBM XGS 7100 Replacement Instructions
IBM XGS 7100 Replacement Instructions

IBM XGS 7100 Replacement Instructions

Power supply replacement

Advertisement

Quick Links

Power Supply Replacement Instructions
The following table lists the appliance models that are supported by the instructions in this document:
Product
IBM Security Network Protection
IBM Security SiteProtector
Note: The illustrations in this document might differ slightly from your appliance model.
Important: Before you proceed with these instructions, review the IBM Systems Safety Notices provided in
the IBM Media Terms and Conditions CD that is included with your appliance model.
CAUTION:
The power control button on the device and the power switch on the power supply do not turn off the
electrical current supplied to the device. The device also might have more than one power cord. To
remove all current from the device, ensure that all power cords are disconnected from the power
source.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
CAUTION:
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
Model
XGS 7100
System
SP 3001
®
IBM
Part Number
97Y1013
46N5744

Advertisement

loading

Summary of Contents for IBM XGS 7100

  • Page 1 Note: The illustrations in this document might differ slightly from your appliance model. Important: Before you proceed with these instructions, review the IBM Systems Safety Notices provided in the IBM Media Terms and Conditions CD that is included with your appliance model.
  • Page 2 Identifying the power supply The back panel of the appliance contains the power supply units, as highlighted in yellow in Figure 1. Figure 1. Location of the power supply units on the back of the appliance Identifying a failed power supply The power supply unit uses an LED to indicate whether the unit is working as expected.
  • Page 3 Make sure that the power supply LED is illuminated in solid green, which indicates that the unit is operating correctly. First edition: November 2014 © Copyright IBM Corporation 2014, 2015. US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

This manual is also suitable for:

Siteprotector sp 300197y101346n5744