Dotyková Podložka - Dell Latitude 3400 Service Manual
Hide thumbs
Also See for Latitude 3400:
- Service manual (139 pages) ,
- Setup and specifications manual (39 pages) ,
- Setup and features information (12 pages)
Table of Contents
Advertisement
Next steps
1. Replace the
hard drive
NOTE:
Required for systems with 42 Whr battery
2. Replace the battery.
3. Replace the
base
cover.
4. Replace the
SD memory
5. Follow the procedure in
Dotyková podložka
Removing the touchpad assembly
Prerequisites
NOTE:
For information only, touchpad is included with the palmrest assembly.
1. Follow the procedure in
2. Remove the
SD memory
3. Remove the
base
cover.
4. Remove the battery.
Steps
1. Remove the three (M2x2) screws that secure the touchpad bracket to the palmrest and keyboard assembly [1].
2. Lift the touchpad bracket off the palmrest and keyboard assembly [2], and peel the tape that secures the bracket to the palmrest.
3. Open the latch and disconnect the touchpad cable from the system board [1].
4. Peel the tape that secures the touchpad to the palmrest and keyboard assembly [2].
30
Demontáž a instalace součástí
assembly.
card.
after working inside your
computer.
before working inside your
card.
computer.
Advertisement
Table of Contents
