hit counter script
Cisco NCS 560-4 Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. NCS 560-4
  6. Hardware installation manual

Cisco NCS 560-4 Hardware Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Cisco NCS 560-4 Router Hardware Installation Guide
First Published: 2019-05-24
Last Modified: 2020-08-01
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco NCS 560-4

Summary of Contents for Cisco NCS 560-4

  • Page 1 Cisco NCS 560-4 Router Hardware Installation Guide First Published: 2019-05-24 Last Modified: 2020-08-01 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 © 2019–2020 Cisco Systems, Inc. All rights reserved.

  • Page 3: Table Of Contents

    Standard Warning Statements Safety Guidelines for Personal Safety and Equipment Protection Safety With Electricity Power Supply Considerations Preventing ESD Damage Site Planning General Precautions Site Planning Checklist Site Selection Guidelines Environmental Requirements Physical Characteristics Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 4 Installing the Plenum on the Rack When Router is Installed on the Rack Installing the Cisco NCS 560 Router Vertically Attaching the Cable Management Brackets Installing the Chassis Ground Connection Installing the Power Supply Preventing Power Loss Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 5 Connecting to the Console Port using Mac OS X Connecting to the Console Port using Linux Installing the Cisco Microsoft Windows USB Device Driver Installing the Cisco Microsoft Windows XP USB Driver Installing the Cisco Microsoft Windows 2000 USB Driver...
  • Page 6 Uninstalling the Cisco Microsoft Windows USB Driver Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver Using the Setup.exe Program Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver Using the Add Remove Programs Utility Uninstalling the Cisco Microsoft Windows Vista USB Driver...
  • Page 7 Contents Fiber-Optic Specifications Alarm Conditions LED Summary RSP LEDs Interface Module LEDs Fan Tray LEDs Power Supply LEDs A P P E N D I X B Site Logs and Manufacturers Manufacturers Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 8 Contents Cisco NCS 560-4 Router Hardware Installation Guide viii...

  • Page 9: Cisco Ncs 560-4 Router Overview

    (IP RAN, Mobile xHaul), residential, and business services (MEF CE 3.0, layer 2/layer 3 and EVPN). The Cisco NCS 560-4 router provides redundancy, shallow depth, low power consumption, high Ethernet interface density, and high services scale, is optimized for aggregation and remote Point-Of-Presence (POP) applications •...
  • Page 10 The cabling for all interfaces (power, data and control) are on the front side of the chassis. The chassis grounding point is located on the rear side of the chassis. The following image illustrates the slot numbering scheme for the FRUs in Cisco NCS 560-4 router in case of single width IMs.

  • Page 11: System Specifications

    Cisco Network Convergence System 560-4 Router Data Sheet. Fan Trays The fan trays are located on the left side of the chassis, while the dust filters are located on the right side of the chassis. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 12 Figure 2: Fan Trays On the Left Side of Router Dust Filter (N560-4-FILTER) The dust filters (set of two filters) are located on the right side of the chassis and prevent dust from entering the chassis. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 13 Cisco NCS 560-4 Router Overview Fan Trays Figure 3: Dust Filters On the Right Side of the Router Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 14: Interface Modules

    N560-IMA1W 0, 1, 2, 3 Starting with Cisco IOS XR Release 7.2.1, 560- IMA2C is also supported in slots 2 and 3. In these slots, 100G optics is supported only on port 0. Staring with Cisco IOS XR Release 7.2.1, 40G optics are supported in slots 0-3.

  • Page 15: Rsp Modules (N560-4-Rsp4 And N560-4-Rsp4E)

    RSP Modules (N560-4-RSP4 and N560-4-RSP4E) The Cisco NCS 560-4 router supports both, N560-4-RSP4 and N560-4-RSP4E. Each RSP has 32GB CPU memory. When redundant RSPs are installed, the control and data plane are 1:1 redundant and the standby RSP components are in hot-standby state, ready to take over as active in the event of a failover.

  • Page 16: Gnss Module (A900-Cm-Gnss)

    The antenna terminal should be earthed at the building entrance in accordance with the ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 17: Power Supply

    • Use a passive splitter if more than one GNSS modules are fed from a single antenna. Power Supply The Cisco NCS 560-4 Router supports three 1200W DC and AC power supplies in PSU0, PSU1, and PSU2, in 2+1 mode or 1+1 mode.
  • Page 18 Figure 5: DC Power Supply - N560-PWR1200-D-E Table 3: DC Power Supply Specifications Part numbers A900-PWR1200-D, N560-PWR1200-D-E Input power specification RTN, -48V Minimum input voltage -40.8 VDC Maximum input voltage -72 VDC Output voltage +12 VDC Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 19 A900-PWR1200-A Input power 115VAC/ specification 230VAC Input voltage 85/264 VAC Minimum input voltage 85 VAC Maximum input voltage 264 VAC Minimum output voltage Maximum output 12.4V voltage Maximum power output 1200 W Redundancy Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 20: Network Timing Interfaces

    The Cisco NCS 560-4 Router supports current sharing between the power supplies. If you install a redundant power supply on the Cisco NCS 560-4 Router, we recommend that you connect each power supply to a separate input power source in order to ensure that the router maintains power in the event of a power interruption caused by an electrical failure, a wiring fault, or a tripped circuit breaker.

  • Page 21: Regulatory Compliance

    Cisco NCS 560-4 Router Overview Regulatory Compliance Regulatory Compliance For regulatory compliance and safety information, see Regulatory Compliance and Safety Information for the Cisco NCS 500 Series Aggregation Routers. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 22 Cisco NCS 560-4 Router Overview Regulatory Compliance Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 23: Preparing For Installation

    In addition, before replacing, configuring, or maintaining the router, review the safety warnings listed in Regulatory Compliance and Safety Information for the Cisco NCS 500 Series Routers. Standard Warning Statements To see translations of the warnings that appear in this publication, refer to the Regulatory Compliance and Safety Information document that accompanied this device.
  • Page 24 This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Statement 340 Warning This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 25: Safety Guidelines For Personal Safety And Equipment Protection

    Read the installation instructions before connecting the system to the power source. Statement 1004 Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. For -48/-60 VDC installation, the wire shall be 8 AWG minimum with a 40 A circuit breaker. Statement 1005 Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 26 Statement 1024 Warning Use copper conductors only. Statement 1025 Warning This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028 Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 27 Failure to securely tighten the power and relay connector captive screws can result in an electrical arc if the connector is accidentally removed. Statement 1058 Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 28 In addition, use the following guidelines when working with any equipment that is disconnected from a power source, but still connected to telephone wiring or network cabling: • Never install telephone wiring during a lightning storm. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 29: Power Supply Considerations

    • Never attempt to remove the printed circuit board from the metal carrier. Note For the safety of your equipment, periodically check the resistance value of the antistatic wrist strap. It should be between 1 and 10 Mohm. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 30: Site Planning

    • The equipment rack in which you plan to install the router complies with requirements. • In selecting the location of the rack, careful consideration has been given to safety, ease of maintenance, and proper airflow. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 31: Site Selection Guidelines

    0, slot 1 and so on. Air Flow Guidelines Cool air is circulated through the Cisco NCS 560-4 Router by three fan trays located along the left side of the router. Air flow is side-to-side, right to left, as shown in the figure below.
  • Page 32 Preparing for Installation Air Flow Guidelines Figure 7: Cisco NCS 560-4 Router Chassis Air Flow Direction of air flow — from the right side of the router to the left side The fan trays maintain acceptable operating temperatures for the internal components by drawing in cool air through the vents, and circulating the air through the chassis.

  • Page 33: Air Flow Guidelines For Enclosed Rack Installation

    Air Flow Guidelines for Enclosed Rack Installation To install a Cisco NCS 560-4 Router in a 4-post enclosed cabinet, the front and rear doors of the cabinet must be removed or be perforated with a minimum of 65% open area (70% for 800mm racks).

  • Page 34: Electrical Circuit Requirements

    Install only in accordance with national and local wiring regulations. Note The Cisco NCS 560-4 Router installation must comply with all the applicable codes and is approved for use with copper conductors only. The ground bond fastening hardware should be of compatible material and preclude loosening, deterioration, and electrochemical corrosion of hardware and joined material.

  • Page 35: Site Cabling Guidelines

    Site Cabling Guidelines The Cisco NCS 560-4 Routers can be powered by a DC source or an AC source. Ensure that equipment grounding is present and observe the power strip ratings. Make sure that the total ampere rating of all products plugged into the power strip does not exceed 80% of the rating.

  • Page 36: Interference Considerations

    The typical sources of EMI are equipment power cords and power service cables from electric utility companies. Strong EMI can destroy the signal drivers and receivers in the Cisco NCS 560-4 Router and even create an electrical hazard by causing power surges through the power lines into installed equipment. These problems are rare but could be catastrophic.

  • Page 37: Rack Selection Guidelines

    • Do not step on or stand on any component or system when servicing other systems or components in a rack. • When mounting the Cisco NCS 560-4 Router in a partially filled rack, load the rack from the bottom to the top, with the heaviest component at the bottom of the rack.

  • Page 38: Cabinet Selection Guidelines

    Periodic Measurement of Environmental Pollutants It is recommended to check concentration of pollutants periodically. Necessary protection should be provided to equipment to ensure the equipment is not exposed to high concentration level of pollutants. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 39: Equipment Rack Guidelines

    Locating for Safety If the Cisco NCS 560-4 Router is the heaviest or the only piece of equipment in the rack, consider installing it at or near the bottom to ensure that the rack’s center of gravity is as low as possible.

  • Page 40: Rack Compatibility

    We recommend that you follow these rack specifications. Rack Types Figure 8: Rack specification EIA (19 inches and 23 inches) Table 7: Rack specification EIA (19 inches and 23 inches) for the Cisco NCS 560-4 Router Post Type Rack Type...
  • Page 41 Preparing for Installation Rack Types Figure 9: Four Post Rack Type Figure 10: Two Post Rack Type Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 42: Installation Checklist

    Use this list to record the completion and verification of each procedure. After the checklist is completed, place it in your Site Log along with the other records pertaining to your new Cisco router. Table 8: Installation Checklist...

  • Page 43: Receiving The Cisco Ncs 560-4 Router

    Site Log as well as a sample Site Log that can be used to make copies. Receiving the Cisco NCS 560-4 Router Each Cisco NCS 560-4 Router chassis is shipped in a container. Figure 11: Figure 12: Cisco NCS 560-4 Router Packaged for Shipping...

  • Page 44: Chassis-Lifting Guidelines

    9600 baud, 8 data bits, no parity, and two stop bits • Console cable for connecting to the console port • (Optional) Modem for connecting to the auxiliary port for remote administrative access Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 45: Unpack And Verify Shipped Contents

    Use the following table to verify the contents of the container. Do not discard the shipping container. You will need the container in the future if you move or ship the router. What to do next Table 9: Cisco NCS 560-4 Router Shipping Container Contents Component Description...
  • Page 46 Regulatory Compliance and Safety Information for the Cisco NCS 500 Router Note Most Cisco documentation is available online. The chassis Pointer Card that is shipped with your Cisco NCS 560-4 Router contains links and information to other online documentation. Note If the product is not in use, store the device in the initial packaged condition or in an ESD PE sealed bag with silica gel.

  • Page 47: Installing The Cisco Ncs 560-4 Router

    C H A P T E R Installing the Cisco NCS 560-4 Router This chapter describes how to install the various components in the Cisco NCS 560-4 Router and includes the following sections: • Prerequisites, on page 39 • Installing the Router in a Rack, on page 39 •...
  • Page 48 Secure the bracket to the chassis with the screws removed when performing Step 1. The recommended maximum torque is 6.2 in.-lb (0.7 N-m). The following figures shows how to attach the brackets on the Cisco NCS 560-4 Router for a ETSI rack and a 23-inch EIA rack.
  • Page 49 Align the mounting holes in the bracket with the mounting holes in the equipment rack. Do not use interface module and power supply ejector handles to lift the chassis; using the handles to lift the chassis can deform or damage the handles. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 50: Assembling The Plenum (N560-4-F2B-Air-U=)

    The plenum allows the air around the router to be distributed evenly. Note If a plenum is to be installed on the rack, ensure that it is first assembled before it is mounted on the rack. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 51 Installing the chassis in a plenum changes the air flow direction from right-to-left of router to front-to-back of the router. Procedure Step 1 Refer to the figures below to assemble the plenum. Secure all screws using a torque of 11.5 in.-lb (1.3 N-m). Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 52 Installing the Cisco NCS 560-4 Router Assembling the Plenum (N560-4-F2B-AIR-U=) Figure 16: Assembling the Plenum Step 2 The assembled plenum has the dimensions as shown in the figure below. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 53: Installing The Plenum On The Rack When Router Is Not Installed On The Rack

    Identify the correct brackets to the plenum. Step 2 Depending on the rack on which you are installing the plenum, identify the appropriate screws to the plenum as shown in the figures below. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 54 Installing the Cisco NCS 560-4 Router Installing the Plenum on the Rack When Router is Not Installed on the Rack Figure 18: Plenum Brackets for Installation on 19-inch Rack Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 55 Installing the Cisco NCS 560-4 Router Installing the Plenum on the Rack When Router is Not Installed on the Rack Figure 19: Plenum Brackets for Installation on 21-inch Rack Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 56 Figure 20: Plenum Brackets for Installation on 23-inch Rack Step 3 Secure the plenum using appropriate bracket on the rack. Step 4 Install the router in the plenum as shown in the figure below. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 57 Installing the Cisco NCS 560-4 Router Installing the Plenum on the Rack When Router is Not Installed on the Rack Figure 21: Assembling the Plenum and Router on the Rack Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 58 Installing the Cisco NCS 560-4 Router Installing the Plenum on the Rack When Router is Not Installed on the Rack Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 59 Installing the Plenum on the Rack When Router is Not Installed on the Rack Ensure that the rack post flange dimensions are maintaned as shown in the figure below. Figure 22: Rack Post Flange Dimensions Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 60: Installing The Plenum On The Rack When Router Is Installed On The Rack

    Identify the type of rack (19-inch, 21-inch, or 23-inch) on which the router is already installed. Step 2 Use the assembled plenum as as shown in the figure below. Step 3 Use the appropriate bracket for the rack and attach the brackets. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 61 Figure 23: Attaching the Brackets on the Rack Step 4 Slide the plenum over the router as shown in the figure below. Step 5 Using the screws that came with the bracket, secure the plenum to the rack. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 62 Installing the Plenum on the Rack When Router is Installed on the Rack Figure 24: Installing the Plenum Around the Router Ensure that the rack post flange dimensions are maintaned as shown in the figure below. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 63: Installing The Cisco Ncs 560 Router Vertically

    Install the bottom support tray at the desired height on your ANSI 19-inch rack. Step 2 Secure the tray to the rack using the rack-mount fasteners appropriate for your rack. Use the optimal torque prescribed for the fasteners. See the figure below. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 64 Install the top support tray at a height of 23.70 inches from the bottom tray. Step 4 Secure tray to the rack using the rack-mount fasteners appropriate for your rack. Use the optimal torque as prescribed for the fastener. See the figure below. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 65 Assemble the vertical plenum into the slot between top and bottom support trays. Step 6 Secure the plenum on to the trays using minimum four screws on every side. Use a torque of 25 in-lbs. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 66 Figure 28: Assembling the Vertical Plenum Between the Support Trays Step 7 Install the empty Cisco NCS 560 router into the vertical plenum using minimum four screws on both sides. Use a torque of 25 in-lbs. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 67 Secure the grounding lugs. Ground screws are provided as part of the router accessories kit. Note The Cisco NCS 560 router provides three locations for the gounding lug. Use the location that best suits your installation requirements. The following figure shows one such location.
  • Page 68 Installing the Cisco NCS 560 Router Vertically Figure 30: Installing the Grounding Lug Step 9 The plenum vertical support brackets are designed to handle two plenum assemblies. Follow steps 1-8 to assemble a second plenum, if required. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 69 Installing the Cisco NCS 560-4 Router Installing the Cisco NCS 560 Router Vertically Figure 31: Rack with Two Plenum Vertical Assemblies Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 70: Attaching The Cable Management Brackets

    Position the cable management brackets against the front of the chassis and align the four screw holes, as shown in the figure below. Figure 32: Attaching Cable Management Brackets to the 19-inch Rack Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 71: Installing The Chassis Ground Connection

    (1.12 N-m). Installing the Chassis Ground Connection Before you connect the power or turn on the power to the Cisco NCS 560-4 Router, you must provide an adequate chassis ground (earth) connection to your router. This section describes how to ground the Cisco NCS 560-4 Router. The router provides two locations for attaching a 2-hole grounding lug according to the rack-mounting brackets you use to install the router.
  • Page 72 • Wire-stripping tools appropriate to the wire you are using Caution Before making connections to the Cisco NCS 560-4 Router, ensure that you disconnect the power at the circuit breaker. Otherwise, severe injury to you or damage to the router may occur.

  • Page 73: Installing The Power Supply

    Connect the other end of the ground wire to a suitable grounding point at your site. Installing the Power Supply The Cisco NCS 560-4 Router router provides the choice of three different power supplies—two DC power supplies and one AC power supply:...

  • Page 74: Preventing Power Loss

    • In some systems, you can use an UPS to protect against power failures at your site. Avoid UPS types that use ferroresonant technology. These UPS types can become unstable with systems like the Cisco NCS 560-4 Router, which can have substantial current draw fluctuations due to bursty data traffic patterns. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 75: Power Connection Guidelines

    Cisco NCS560-4 Router based on a given configuration of the router. Determining power requirements is useful for planning the power distribution system needed to support the router. Power Connection Guidelines This section provides guidelines for connecting the Cisco NCS 560-4 Router power supplies to the site power source. Warning Never defeat the ground conductor or operate the equipment in the absence of a suitably installed ground conductor.

  • Page 76: Installing The N560-Pwr1200-D-E Dc Power Supply Module

    Installing the N560-PWR1200-D-E DC Power Supply Module The following sections describe how to install a DC power supply in the Cisco NCS 560-4 Router: Note This equipment is suitable for installation in Network Telecommunications Facilities and locations where the NEC applies.
  • Page 77 Attach the lugs on the terminal block, as shown in the figure below. Figure 37: Wiring Sequence and Attaching the Lugs Caution Do not over torque the fasteners of the terminal block. The recommended maximum torque is 25 in.-lb (2.82 N-m). Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 78: Installing The A900-Pwr1200-D Dc Power Supply Module

    Step 2 Slip on the ESD-preventive wrist strap that was included in the accessory kit. Step 3 Locate the T-shaped terminal block plug on the DC power supply unit. See the figure below. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 79 Identify the ground, positive, and negative feed positions for the terminal block connection. The recommended wiring sequence is: • Negative (-) lead wire (top) • Ground lead wire (left) • Positive (+) lead wire (right) Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 80: Activating The Dc Power Supply

    If you are installing a redundant DC power supply, repeat these steps for the second power source. Removing and Replacing the DC Power Supply This section provides information about removing and replacing the DC power supply in the Cisco NCS 560-4 Router.
  • Page 81 Warning Installation of the equipment must comply with local and national electrical codes. Statement 1074 Follow these steps to remove and replace the DC power supply on the Cisco NCS 560-4 Router: Before you begin See the table below for OIR parameters for the power supply.

  • Page 82: Installing The Ac Power Supply Module For A900-Pwr1200-A (1200 W)

    Step 5 Tighten the captive installation screws of the power supply. The recommended maximum torque is 5.5 in.-lb (.62 N-m). Warning Power supply captive installation screws must be tight to ensure protective grounding continuity. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 83: Recommended Power Cables

    Recommended Power Cables Table 11: Power Cable PIDs for A900-PWR1200-A (1200 W) Description PWR-CAB-AC-USA520 US AC Power Cord for Cisco ASR 900, NEMA 5-20 PWR-CAB-AC-USA Power Cord for AC V2 Power Module (USA), NEMA L6-20P PWR-CAB-AC-AUS Power Cord for AC V2 Power Module (Australia), AS 3112...

  • Page 84: Removing And Replacing The Ac Power Supply

    This section describes how to remove and replace the AC power supply. Note The Cisco NCS 560-4 Router power supplies are hot-swappable. If you have installed redundant power supply modules, you can replace a single power supply without interrupting power to the router.

  • Page 85: Installing The Fan Trays

    Step 5 If the power supply bay is to remain empty, install a blank filler plate (Cisco part number N560-PWR-BLANK) over the opening, and secure it with the captive installation screws.
  • Page 86 Secure the master fan tray to the chassis using the attached captive installation screws. The recommended maximum torque is 5.5 in.-lb (.62 N-m). Step 5 Orient the slave fan tray (N560-4-FAN-H) so that the fan tray is upright. See the figure below. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 87: Removing And Replacing The Dust Filter

    Repeat steps 4 and 5 for the second slave fan tray. This completes the procedure for installing the fan trays in a Cisco NCS 560-4 Router. For a summary of the LEDs on the fan tray, see the Pinout and LED Details section. For more information about air flow guidelines, see the Air Flow Guidelines section.

  • Page 88: Dust Filter Maintenance

    This section describes the removal and replacement of both, the master fan tray and the slave fan trays. When any fan tray is removed, the other fans run at maximum speed. When a fan tray is re-inserted in the chassis, all fans run at normal speed within two minutes. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 89 Always handle the fan tray by the handle. Step 4 Pull the fan tray toward you no more than 1 inch to disengage it from the power receptacle on the midplane. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 90: Rsp Installation

    Step 4 Position the module in the slot. Make sure that you align the sides of the module with the guides on each side of the slot, as shown in the figure below. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 91 Blank module filler plates (Cisco part number N560-4-RSP-BLANK) should be installed in any Caution empty chassis slots to keep dust out of the chassis and to maintain consistent airflow through the chassis.

  • Page 92: Removing An Rsp Module

    If the captive installation screws are loose, the EMI gaskets on the installed modules will push the modules toward the open slot, which in turn reduces the size of the opening and makes it difficult to remove the module. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 93: Removing The Im Center Brackets

    Place the module on an antistatic mat or antistatic foam, or immediately reinstall the module in another slot. Step 8 Install blank module filler plates (Cisco part number N560-4-RSP-BLANK) in empty slots, if any. Blank faceplates and cover panels serve three important functions: they prevent exposure to hazardous Warning voltages and currents inside the chassis;...

  • Page 94: Interface Module Installation

    Figure 44: Removing the IM Center Bracket from the IM Slot This completes the removal of the IM center brackets. Interface Module Installation The following sections describe the various tasks associated with interface module installation on the Cisco NCS 560-4 Router: Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 95: Installing An Interface Module

    Close all unused RJ-45, SFP, XFP, and QSFP ports on the interface module using the appropriate Note dust caps to prevent dust from accumulating inside the cage. For information on dust caps, see Installing Dust Caps . Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 96: Removing An Interface Module

    Hot-Swapping an RSP or Interface Module The Cisco NCS 560-4 Router provides a feature that allows you to remove and replace a redundant RSP module without powering down the router. This feature, called hot-swapping or OIR, allows you to remove and replace a redundant module without disrupting router operation.

  • Page 97: Installing Dust Caps

    Repeat this process with the IMs s on the right side, the cables from the RSPs and the cables from the power supply units. Step 2 Secure the cables around the cable management brackets as shown in the figures below. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 98 Securing the Cables Around the Cable Management Brackets Figure 46: Gathering and Securing the Cables - Front View Point A Point B Curved cable length 95mm from point A to point Curved cable length 120mm from point A to point Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 99 Cables from the interface modules on the right side Cables from the interface modules on the left side of chassis of chassis Cables from the active and standby RSPs Cables from the active and standby RSPs Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 100: Connecting The Router To The Network

    This section describes the various ways to connect the router to the network. Connecting Console Cables Note You cannot use the USB and RS232 console ports at the same time; if you insert the USB cable into the router, the RS232 port is disabled. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 101: Connecting To The Serial Port Using Microsoft Windows

    You cannot use the USB port and the EIA port concurrently. See Connecting to the Auxiliary Port Note section. When the USB port is used it takes priority over the RJ45 EIA port. The USB Type A-to-Type A cable is not included with the Cisco NCS 560-4 Router; it is ordered Note separately.

  • Page 102: Connecting To The Console Port Using Mac Os X

    Installing the Cisco NCS 560-4 Router Connecting to the Console Port using Mac OS X Figure 48: Connecting the USB Console Cable to the Cisco NCS 560-4 Router USB Type-A console port USB 5-pin mini USB Type-B to USB Type-A console cable USB Type-A —...

  • Page 103: Connecting To The Console Port Using Linux

    To disconnect the Linux USB console from the Terminal window enter Ctrl-a followed by : then quit Installing the Cisco Microsoft Windows USB Device Driver A USB device driver must be installed the first time a Microsoft Windows-based PC is connected to the USB serial port on the router.

  • Page 104: Installing The Cisco Microsoft Windows Xp Usb Driver

    Installing the Cisco Microsoft Windows 2000 USB Driver This procedure shows how to install the Microsoft Windows 2000 USB driver. Procedure Step 1 Obtain the file Cisco_usbconsole_driver.zip from the Cisco.com web site and unzip it. Step 2 Double-click the file setup.exe. Step 3 The Cisco Virtual Com InstallShield Wizard begins.

  • Page 105: Uninstalling The Cisco Microsoft Windows Usb Driver

    The USB console is ready for use. Uninstalling the Cisco Microsoft Windows USB Driver This section provides instructions for how to uninstall the Cisco Microsoft Windows USB device driver. Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver Using the Setup.exe Program Disconnect the router console terminal before uninstalling the driver.

  • Page 106: Uninstalling The Cisco Microsoft Windows Vista Usb Driver

    DB-9-to-DB-25 connector adapter. Note The console cable and DB-9-to-DB-25 connector are not included with the Cisco NCS 560-4 Router; they are ordered separately. To connect a modem to the router, follow these steps:...

  • Page 107: Connecting A Management Ethernet Cable

    Installing the Cisco NCS 560-4 Router Connecting a Management Ethernet Cable Figure 49: Connecting a Modem to the Cisco NCS 560-4 Router RJ45 AUX port RJ45 to DB-9 DB-9 to DB-25 adapter Modem Step 2 Connect the DB-9 end of the console cable to the DB-9 end of the modem adapter.

  • Page 108: Installing And Removing Sfp Modules

    Connecting a USB Flash Device To connect a USB flash device to the Cisco NCS 560-4 Router, insert the memory stick in the USB port labeled MEM. The Flash memory module can be inserted in only one way, and can be inserted or removed regardless of whether the router is powered up or not.

  • Page 109: Connecting Timing Cables

    Connecting Timing Cables Connecting Timing Cables The following sections describe how to connect timing cables to the Cisco NCS 560-4 Router: Note When installing the cabling to the RSPs, we recommend that you leave a service loop of extra cabling sufficient to allow for fan tray removal.

  • Page 110: Connecting Cables To The Output 10Mhz Or 1Pps Interface

    For more information about GPS port pinouts, see the LED Details section. Note Connecting Cables to a GNSS Interface The following sections describe how to connect cables from the Cisco NCS 560-4 Router to a GPS unit for input or output timing of frequency. Note A Y-cable is required to connect to a primary and backup RSP in order to ensure that the router continues to transmit timing signals in the event of a network failure.

  • Page 111: Connecting A Cable To The Gnss Antenna Interface

    Ethernet SFP ports, see Connecting Cables to SFP Modules. The RJ45 port supports standard straight-through and crossover Category 5 unshielded twisted-pair (UTP) cables. Cisco Systems does not supply Category 5 UTP cables; these cables are available commercially. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 112: Connecting Cables To Sfp Modules

    Installing and Removing SFP Modules The Cisco NCS 560-4 Router supports a variety of SFP modules, including optical and Ethernet modules. For information on how to install and remove SFP modules, see the documentation for the SFP module at http://www.cisco.com/en/US/partner/products/hw/modules/ps5455/prod_installation_guides_list.html...

  • Page 113: Cisco Router Initial Configuration

    C H A P T E R Cisco Router Initial Configuration For information on setting up your router, see the System Setup and Software Installation Guide for Cisco NCS 560 Series Router. Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 114 Cisco Router Initial Configuration Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 115: Appendix A Pinout And Led Details

    A P P E N D I X Pinout and LED Details The following sections provide information for troubleshooting problems on the Cisco NCS 560-4 Router. • Pinouts, on page 107 • Fiber-Optic Specifications, on page 112 • Alarm Conditions, on page 112 •...

  • Page 116: Gps Port Pinout

    — — — — 1PPS RS422 signal 1PPS_P Input TOD_N Output or input Time of Day R422 output or input signal TOD_P Output or input Time of Day R422 output or input signal Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 117: Alarm Port Pinout

    COMMON Alarm common Console/Aux RJ45 RS232 Serial Port Pinout The table below summarizes the console/aux RJ45 RS232 serial port pinout. Table 20: Console/Aux RJ45 RS232 serial port Signal Direction Description Name — Used Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 118: Management Ethernet Port Pinout

    This is not a data plane port. The table below summarizes the Management Ethernet port pinout. Table 21: Management Ethernet Port Pinout Signal Description Name TRP0+ TRP0- TRP1+ TRP1- TRP2+ TRP2- TRP3+ TRP3- Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 119: Usb Console Port Pinout

    The USB Console port +5VDC is input and operates as an USB peripheral device. USB Flash/MEM Port Pinout Table 22: Single USB Flash/MEM Port Signal Direction Description Name +5VDC (500mA) Data - Data + Ground Note USB TYPE-A receptacle used. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 120: Fiber-Optic Specifications

    IM OIR IM crash Standby RSP in ROMmon mode Major RSP removed RSP failure Port administratively shut down Info LED Summary The following sections describe the meanings of the LEDs on the router. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 121: Rsp Leds

    The PWR and STAT LEDs are available on the front panel. These LEDs provide power on the board (PWR) and overall router health (STAT) status. During power up state, these LEDs provide booting status and report errors. Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 122: Interface Module Leds

    No power to IM (PWR) Green Enabled and power Enabled and power Enabled and power All power rails are rails on IM in range rails on IM in range rails on IM in range in range Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 123 Laser Off – CFP0 — — — Controller down/shutdown Yellow — — — Link Down – Controller/HuGig SubPort 0 is “Operational Down” Green — — — Link Up – Controller/HuGig SubPort 0 is “Operational Up” Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 124: Fan Tray Leds

    In the event that a single fan fails, the router software adjusts the fan speed to prevent excessive heat within the chassis. Table 27: Master Fan Tray LED Details Color/State Description Status Disabled/power down (TEMP) Amber Over temperature Green Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 125: Power Supply Leds

    Input voltage out of range Green Input voltage within acceptable operating range Disabled/Forced Shut down/No input power Output Fail Power supply fault (internal failure such as over temperature) Green Operational Blinking Output ORING FET Failed Cisco NCS 560-4 Router Hardware Installation Guide...
  • Page 126 Pinout and LED Details Power Supply LEDs Cisco NCS 560-4 Router Hardware Installation Guide...

  • Page 127: Appendix B Site Logs And Manufacturers

    Checklist (see the Preparing for Installation chapter) to verify the steps in the installation and maintenance of your router. Site Log entries might include the following: • Installation progress—Make a copy of the Cisco NCS 560-4 Router Installation Checklist, and insert it into the Site Log. Make entries as you complete each task.
  • Page 128 Site Logs and Manufacturers Site Logs and Manufacturers Cisco NCS 560-4 Router Hardware Installation Guide...

Table of Contents