Mounting Remote Indicator; Mounting Dimensions; Bracket Mounting Procedure; Figure 5: Typical Pipe Mounted Installations - Honeywell RMA801 User Manual
Remote indicator
Hide thumbs
Also See for RMA801:
- Quick start installation manual (6 pages) ,
- User manual (144 pages) ,
- Quick start installation manual (6 pages)
Table of Contents
Advertisement
2.3
Mounting Remote Indicator
Remote Indicator models can be attached to a two-inch (50.8 millimeter) vertical or horizontal pipe
using Honeywell's optional pipe mounting bracket. The Remote Indicator can also be wall mounted
using Honeywell's optional wall mounint bracket as shown in Figure
2.3.1
Mounting Dimensions
Refer to Honeywell drawing number 51455045
Honeywell drawing numbers 32306827
Detailed Pipe Angle mounting dimenisons and 32306828
Abbreviated overall dimensions are also shown on the Specification Sheets for the Remote Indicator
models. Its assumed that the mounting dimensions have already been considered and the mounting area
can accommodate the Remote Indicator.
2.3.2
Bracket Mounting Procedure
1. Pipe Mount Option -Refer to Figure
Remote Indicator with the two slots in the mounting bracket and assemble the (2) M8 hex cap
screws, (2) lockwashers and (2) flat washers provided.
2. Rotate the Remote Indicator assembly to the desired position and torque the M8 hex cap screws
to 27,0 Nm/20,0 Lb-ft maximum
* Honeywell drawings can be supplied on request.
7
*
for detailed electronic housing dimensions. Refer to
*
for detailed pipe mounting dimensions, 50124813
6.
Align the two mounting holes at the bottom of the
Figure 5: Typical Pipe Mounted Installations
RMA803 Remote Indicator User's Guide
5.
*
for detailed wall mounting dimensions.
*
for
Revision 2
Hide quick links:
Advertisement
Table of Contents
