Related Manuals for Sealey BSCU170
Summary of Contents for Sealey BSCU170
- Page 1 BATTERY CHARGER/POWER SUPPLY BSCU170 MODEL NO: Original Language Version BSCU170 Issue:1 - 25/10/18 © Jack Sealey Limited 0099002050-00...
-
Page 2: Safety Symbols
10 minutes and get medical attention right away. If battery acid is accidentally swallowed, drink milk, the whites of eggs or water. DO NOT induce vomiting. Seek medical attention immediately. Original Language Version BSCU170 Issue:1 - 25/10/18 © Jack Sealey Limited... -
Page 3: Preparing To Charge
6.7. A marine (boat) battery must be removed and charged on shore. To charge it onboard requires equipment specially designed for marine use. Original Language Version BSCU170 Issue:1 - 25/10/18 © Jack Sealey Limited... -
Page 4: Grounding And Ac Power Cord Connections
Over 100 feet (30.5 meters) long – use an 8 gauge (8.36 mm²) extension cord. 8. MOUNTING INSTRUCTIONS NOTE: The BSCU170 is non-portable equipment. Suitable for mounting only on concrete or other non-combustible surfaces. To permanently mount the charger, use the following instructions: 8.1. - Page 5 CHARGING (yellow/orange) LED will go out and the digital display will show « bAd bAt ». The charger ignores all buttons except ● in that state. Press ● to reset after an aborted charge. Original Language Version BSCU170 Issue:1 - 25/10/18 © Jack Sealey Limited...
- Page 6 Find your battery’s rating on the following chart and note the charge time given for each charger setting. The times given are for batteries with a 50 percent charge prior to recharging. Add more time for severely discharged batteries. Original Language Version BSCU170 Issue:1 - 25/10/18 © Jack Sealey Limited...
- Page 7 Input....................220-240V~ 50/60Hz 10A Output: Charging mode..................12V 4A / 20A / 70A Desulfation mode....................15.8V max. Reprogram mode..........13-14.8V 0-70A, 100A for three minutes Weight........................9.56kg Operating temperature.............-20 °C – +40 °C (-4 °F–+104 °F) Operating humidity..............0 – 90% RH non-condensing Working life (MTBF)..................85,000 hours Original Language Version BSCU170 Issue:1 - 25/10/18 © Jack Sealey Limited...
-
Page 8: Troubleshooting
Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk... -
Page 9: Ec Declaration Of Conformity
2011/65/EU RoHS Directive This declaration of conformity is issued under the sole responsibility of the manufacturer: Jack Sealey Ltd, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR Declaration of Conformity in accordance with the above Directive(s)� References to harmonised standard(s) EN 61000-3-2:2014 ����������������������������������������������������������������������...