Caution for safety Any electrical installation work must be carried out by a qualified electrician or competent person. This electric appliance must be installed according to the instructions in order to avoid a damage. This oven should be disconnected from the power supply before installation or maintenance. This oven should always be earthed.
Page 3
The work in the high cabinet Oven dimensions and kichen cabinet dimensions are shown in the fig-2A, 2B. A gap must be minimum 10mm between the rear of the installed oven and the connecting wall. To Lift oven, use side holes of the oven (refer to arrow, Fig-2A). Kitchen cabinet in contact with the oven must be heat resistant up to 90 °C, and close units fronts up to at least 70 °C.
Page 4
For Ventilation For correct ventilation, the ventilation opening of 50mm should be required between the back wall and the floor of the installation cabinet (See “Q ” fig--1D, 2B & 3A), the ventilation gap of 5mm is required between the oven top rim and the cooktop lower rim, and between the oven both sides rim and the cabinet (fig-3B, 3C), these openings must not be closed by any way.