Related Manuals for Eachine E011C
Summary of Contents for Eachine E011C
- Page 1 AGE 14+ E011C DRONE X BRICK 2 IN 1 *Please read this manual carefully before operation and keep it properly for future reference.
- Page 2 KNOW YOUR E011C E011C Drone applies building blocks into the drone construction and uses 2.4GHz to enable multiple players compete without any risk of interference. It is easy to operate via remote control to control functions such as flying, 3D flips and rolls, return to home, headless mode and other features.
- Page 3 ACCESSORIES E011C x1 Remote Control x1 (Battery Included) Backup Propeller x4 USB Charging Cable x1 AGE 14+ E011C DRONE X BRICK 2 IN 1 *Please read this manual carefully before operation and keep it properly for future reference. User Manual x1...
- Page 4 PRE-FLIGHT PREPARATION 1.Flight Environment Indoor: Spacious spaces away from barriers, crowds or pets are preferred. Outdoor: Sunny, windless and breezy weathers are preferred. Please keep the drone in sight during the flight and keep it away from barriers, high-tension cables, trees and people.
- Page 5 2.Propellers Installation FRONT Hold onto the hat of the A corresponds to A blades, align the hat to B corresponds to B the motor shaft and press until fixed. 3.Block-man Installation ①Fix Block-man onto ②Block-man stands the drone. still above the drone. Notes: When installing or dismantling the propeller, please do not exert force on the propeller to avoid distortion.
- Page 6 4.Battery Charging for Drone A.Remove the battery from drone bottom. B.Connect USB charging cable with lithium battery and the USB charging interface to charge up. Notes: LED lights on when charging, LED lights off when finish charging. Charging time is about 30-50 minutes.
- Page 7 Battery lnstructions There is a certain risk when using lithium battery. It may cause fire, body injury or property loss. Users must be aware of the risks and take full responsibility of using battery improperly. If battery leakage occurs, please avoid contacting your eyes or skin with electrolyte.
- Page 8 KNOW YOUR REMOTE CONTROL Operation Board of Remote Control Left/Right Turn Throttle Joystick/ Fine-tuning Press for Return to Indicator Light Home/Push the Rubber Rubber Joystick/Short Joystick to Enter Headless Press for Flips&Rolls/ Mode During Return Long Press for Three Forward/Backward Seconds to Enter Fine-Tuning Flight Mode...
- Page 9 1.Battery Assembling for Remote Control ①Open the Remote Control Battery Cover Open the battery cover by sliding the cover downward (as shown in figure). ②Battery Assembling for Remote Control AAA batteries *3 1.5V“AAA” 1.5V“AAA” 1.5V“AAA” 1.5V“AAA” Open the cover of battery compartment, insert three AAA batteries (not included).
- Page 10 2.Pairing Remote Control with Drone ①Turn on the power of the drone; put the drone on plain ground; check whether the indicator lights of remote control and LED lights of drone flash. ②Push the accelerator joystick to the top and then pull back to the bottom.
- Page 11 FLY WITH REMOTE CONTROL 1.Flying The left joystick is used to control flying height and left and right turning, while the right joystick is used to control forward, backward and sideward flights. Left Joystick Ascend Descend Turn Left Turn Right...
- Page 12 Right Joystick Forward Backward Left Sideward Right Sideward...
- Page 13 Flips and Rolls Till the drone flies over 3 meters, press the button of flips and rolls and move the right joystick to certain direction to finalize flips and rolls. (Please disassemble the block-man) Right Joystick Front Flips and Rolls Left Flips and Rolls Right Flips...
- Page 14 2.Fine-Tuning Touch the accelerator joystick to let the drone take off and fly in the air. Calibrate the orientation when the drone yaws or spins. ① ①Forward Fine-tuning ③ ④ ②Backward Fine-tuning ③Left Sideward Fine-tuning ④Right Sideward Fine-tuning Notes: When the drone is within 30cm from the ground, it will be affected by the blade vortex made by itself and become unstable.
- Page 15 3.Headless Mode/Return to Home Press “Return to Home” and the drone would return automatically along the original route. When the drone flies far away and beyond your vision, press “Return to Home” and push the joystick to enter “Headless Mode” , and the drone would return home without worrying about the orientation.
- Page 16 PROBLEMS CAUSES SOLUTIONS Not connect with Connect the drone the drone battery. battery in right way. Control Do not fly in windy failure days. The Too strong wind performance and the force. control of the drone will be affected by the strong winds.