Tacacs-Server Host - Cisco Nexus 5500 Series Command Reference Manual
Nx-os security command reference
Hide thumbs
Also See for Nexus 5500 Series:
- Hardware installation manual (142 pages) ,
- Command reference manual (460 pages) ,
- Configuration manual (160 pages)
Table of Contents
Advertisement
tacacs-server host
tacacs-server host
To configure TACACS+ server host parameters, use the tacacs-server host command. To revert to the
defaults, use the no form of this command.
Syntax Description
hostname
ipv4-address
ipv6-address
key
0
7
shared-secret
port port-number
test
idle-time time
password password
username name
timeout seconds
Cisco Nexus 5500 Series NX-OS Security Command Reference
344
tacacs-server host {hostname | ipv4-address | ipv6-address} [key [0 | 7] shared-secret]
[port port-number] [test {idle-time time | password password | username name}]
[timeout seconds]
no tacacs-server host {hostname | ipv4-address | ipv6-address} [key [0 | 7] shared-secret]
[port port-number] [test {idle-time time | password password | username name}]
[timeout seconds]
TACACS+ server Domain Name Server (DNS) name. The name is
alphanumeric, case sensitive, and has a maximum of 256 characters.
TACACS+ server IPv4 address in the A.B.C.D format.
TACACS+ server IPv6 address in the X:X:X::X format.
(Optional) Configures the TACACS+ server's shared secret key.
(Optional) Configures a preshared key specified in clear text (indicated by 0)
to authenticate communication between the TACACS+ client and server.
This is the default.
(Optional) Configures a preshared key specified in encrypted text (indicated
by 7) to authenticate communication between the TACACS+ client and
server.
Preshared key to authenticate communication between the TACACS+ client
and server. The preshared key is alphanumeric, case sensitive, and has a
maximum of 63 characters.
(Optional) Configures a TACACS+ server port for authentication. The range
is from 1 to 65535.
(Optional) Configures parameters to send test packets to the TACACS+
server.
(Optional) Specifies the time interval (in minutes) for monitoring the server.
The time range is 1 to 1440 minutes.
(Optional) Specifies a user password in the test packets. The password is
alphanumeric, case sensitive, and has a maximum of 32 characters.
(Optional) Specifies a user name in the test packets. The username is
alphanumeric, case sensitive, and has a maximum of 32 characters.
(Optional) Configures a TACACS+ server timeout period (in seconds)
between retransmissions to the TACACS+ server. The range is from 1 to 60
seconds.
Chapter
T Commands
OL-27883-02
- Quick Links:
- Aaa Accounting Default
- Show Ip Arp
Hide quick links:
Advertisement
Table of Contents
