Page 2
Please read this manual first! Dear Customer, We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you with effective service. For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future references.
1 Important instructions for safety and 6 Maintenance and cleaning environment 7 Troubleshooting 2 Your Refrigerator 3 Installation 3.1 Appropriate location for installation ..8 3.2 Installing the plastic wedges ... . .8 3.3 Adjusting the feet .
Page 4
• Do not dispose of the • On delivery, check to make appliance on a fire. At Beko, sure that the product is not the care and protection of our damaged and that all the parts...
Important instructions regarding safety and environment Pressure for cold water inlet • Do not use mechanical devices • shall be maximum 90 psi (6.2 or other means to accelerate bar). If your water pressure the defrosting process, other exceeds 80 psi (5.5 bar), use a than those recommended by the pressure limiting valve in your manufacturer.
Page 6
Beko authorised service (See diagram). agent. 1. Connect the green-yellow or green (Earth) wire to the terminal in the plug marked ‘E’ or with the symbol Warning! This appliance or coloured green and yellow or green.
Important instructions regarding safety and environment Energy saving tips Package information Packaging materials of the product are 1. Ensure your appliance is installed in a well ventilated manufactured from recyclable materials in area. accordance with our National Environment 2. Ensure the time between buying chilled/frozen Regulations.
Your Refrigerator 1- Control and indicator panel 7- Chiller compartment 2- Butter & Cheese section 8- Icebox drawer 3- 70 mm moving door shelf 9- Multizone compartment glass shelf 4- Fridge compartment glass shelf 10- Freezer compartment drawers 5- Fridge compartment crisper 11- Multizone Compartment's drawer 6- Gallon door shelf Figures in this user manual are schematic and may not match the product exactly.
Installation 1. To install the wedges, remove the screws on the 3.1 Appropriate location product and use the screws supplied together with the for installation wedges. Contact an Authorized Service for the installation of the product. In order to prepare the product for use, refer the information in the user manual and ensure that electrical installation and water installation are appropriate.
Installation adjusting nut fixing nut fixing nut adjusting nut To adjust the doors vertically, 3.4 Electric connection Loosen the fixing nut located at the bottom. Rotate the adjusting nut according to the position WARNING: Do not make connections via of the door (clockwise/counter-clockwise). extension cables or multi-plugs.
Preparation 4.1 Things to be done for If two coolers are to be installed side saving energy by side, there should be at least 4 cm distance between them. Connecting your refrigerator to systems that save energy is dangerous as they may 4.2 Recommendations about the cause damage on the product.
Preparation 4.3 Initial use Before using the product, make sure that all preparations have been made in accordance with the instructions given in the "Important instructions regarding safety and environment" and "Installation" chapters. • Clean the interior of the refrigerator as recommended in the “Maintenance and cleaning”...
Operating the product 5.1 Indicator panel Touch-controlled indicator panel allows you to set the temperature and control the other functions related to the refrigerator without opening the door of the product. Just press the relevant buttons for function settings. 10 11 Quick Cool Quick Freeze 3 “...
Page 14
Operating the product 1. Quick cooling function indicator 8. Joker freezer icon It turns on when the quick fridge function is Hover over the Joker freezer icon using the FN button; the activated. icon will start to flash. When you press the OK key, joker 2.
Page 15
Operating the product 21. Setting the Celsius and Fahrenheit 14. FN button indicator Using this key, you can switch between the Hover over this key using the FN key and select functions that you want to select. Upon pressing Fahrenheit and Celsius via the OK key. When this key, the icon, whose function is required to be the relevant temperature type is selected, the activated or deactivated, and this icon's indicator...
Page 16
Operating the product 29. Temperature change cabin icon hover over the icon and the indicator again and press the OK key. Thus, both the eco fuzzy function Indicates the cabin whose temperature is to be icon and the indicator will start flashing. If you do changed.
Operating the product 5.3 Recommendations for Use quick cooling function when you preserving the frozen food want to quickly cool the food placed Compartment shall be set to -18°C at least. in the fridge compartment. If you want 1. Put packages in the freezer as quickly as to cool large amounts of fresh food, possible after purchase without allowing the activate this function before putting the...
Operating the product Freezer Fridge Compartment Compartment Remarks Setting Setting -18°C 4°C This is the normal recommended setting. -20, -22 or These settings are recommended when the ambient temperature 4°C -24°C exceeds 30°C. Use when you wish to freeze your food in a short time. Your product Quick Freeze 4°C will return to its previous mode when the process is over.
Operating the product 5.7 Chiller compartment 5.9 Humidity-controlled crisper Chiller compartments allow you to prepare the food (FreSHelf) for freezing. You can also use these compartments (This feature is optional) to store your food at a temperature a few degrees below the fridge compartment.
Operating the product 5.11 Movable Middle Section degrees is used to keep the meats up to 2 weeks Movable middle section is intended to prevent in an easily sliceable condition. the cold air inside your refrigerator from escaping The feature of switching to a Fridge or Freezer outside.
Maintenance and cleaning 6.1. Preventing malodour The product is manufactured free of any Cleaning the product regularly will prolong its odorous materials. However, keeping the food in service life. inappropriate sections and improper cleaning of WARNING: Disconnect the power before internal surfaces may lead to malodour.
Troubleshooting vivo Check this list before contacting the service. Doing so will save you time and money. This list includes frequent complaints that are not related to faulty workmanship or materials. Certain features mentioned herein may not apply to your product. The refrigerator is not working.
Page 23
Troubleshooting The freezer temperature is very low, but the cooler temperature is adequate. • The freezer compartment temperature is set to a very low degree. >>> Set the freezer compartment temperature to a higher degree and check again. The cooler temperature is very low, but the freezer temperature is adequate. • The cooler compartment temperature is set to a very low degree.
Page 24
Troubleshooting • The product is not cleaned regularly. >>> Clean the interior regularly using sponge, warm water and carbonated water. • Certain holders and packaging materials may cause odour. >>> Use holders and packaging materials without free of odour. • The foods were placed in unsealed holders. >>> Keep the foods in sealed holders. Micro-organisms may spread out of unsealed food items and cause malodour.
. • The cost of functional replacement parts, but excluding consumable items. • The labour costs of a Beko approved repairer to carry out the repair. What is not covered? • Transit, delivery or accidental damage or misuse and abuse.
Page 26
Otherwise please call the appropriate number above where service can be obtained at a charge. Should you experience any di culty in obtaining service please contact the Beko Customer Help-Line. Tel: 0845 6004911 e-mail: service@beko.co.uk...