Table of Contents
Advertisement
8.5
SIMOTION CompactFlash card
8.5.1
Changing the CompactFlash card
Requirement
NOTICE
Damage to the CompactFlash card from electrical fields or electrostatic discharge
The CompactFlash card is an ESD-sensitive component.
De-energize the SIMOTION D410‑2 device before inserting or removing the CompactFlash
card. The SIMOTION D410‑2 is in a de-energized state when all the LEDs are OFF.
Comply with the ESD rules.
Procedure
To change the CF card, proceed as follows:
1. Switch off the power supply.
2. Remove the CF card from the plug-in slot on the SIMOTION D410-2.
To do this, grasp the gripping cavity between your thumb and forefinger and pull the card
out.
3. Gently insert the new CF card into the empty plug-in slot until it clicks into place. The
direction of insertion of the CF card is indicated by an arrow located on both the plug-in slot
and the CF card.
The properly inserted card does not protrude from the SIMOTION D410-2 housing.
4. Switch the power supply on again.
SIMOTION D410-2
Commissioning and Hardware Installation Manual, 01/2015
Service and maintenance
8.5 SIMOTION CompactFlash card
291
- Quick Links:
- I/O Integration
- Diagnostics Via Led Displays
Hide quick links:
Advertisement
Table of Contents
