Table of Contents Overview ............3 Usage Notes..........3 Parts Identification ........4 Attaching the Viewfinder to a Camera..5 Detaching the Viewfinder ......5 Adjusting the Position ........6 Adjusting the Left/Right Position ....6 Adjusting the Forward/Backward Position and Height ........6 Adjusting the Angle ........7 Raising the VF Barrel and Eyepiece ..7 Raising the VF Barrel........7 Removing the VF Barrel ......8...
Overview Usage Notes The DVF-L350 is a 3.5-inch color LCD viewfinder. Place of use This unit has the following features. When using the viewfinder in low temperature environments, dynamic resolution levels may decrease High resolution and wide visual angle during the period immediately after you turn on the The viewfinder uses a high-resolution LCD for a power.
i MIRROR switch Parts Identification Inverts the right and left of the image. Set this to ON when viewing the image with the VF barrel and eyepiece removed. ON: Inverts the right and left of the image. OFF: The image is not inverted. j CONTRAST adjustment knob Turn the knob to adjust the contrast on the screen.
Connect the viewfinder connector to the VF Attaching the Viewfinder connector on the camera. Verify the orientation of the connector, and insert to a Camera it until it clicks into place. Secure the cable with the clamp if necessary. CAUTION Notes Do not leave the eyepiece lens facing toward the sun •...
Adjusting the Forward/Backward Adjusting the Position Position and Height Note Rotating the viewfinder too much in a single direction while adjusting its position and angle may pull the viewfinder cable and result in disconnection. Adjusting the Left/Right Position Fixing ring Arm lock knob Loosen the fixing ring on the camera’s viewfinder shoe, and slide the viewfinder left or right to adjust its position.
Adjusting the Angle Raising the VF Barrel and Eyepiece You can view the LCD screen inside the viewfinder or its mirror image by raising the VF barrel or eyepiece. This section describes how to raise or remove the VF barrel. The eyepiece can be raised or removed in the same way.
Raise the VF barrel. Cleaning the LCD Screen The VF barrel locks at 120 degrees. Use the viewfinder in this lock position under normal When cleaning the viewfinder’s LCD screen, remove the circumstances. viewfinder from the camera, and take care not to damage You can also open the VF barrel beyond this lock the components.
–20 °C to +60 °C (–4 °F to +140 °F) ANY OTHER REASON WHATSOEVER. Mass • SONY WILL NOT BE LIABLE FOR CLAIMS OF Approx. 660 g (1 lb 7.3 oz) ANY KIND MADE BY USERS OF THIS UNIT OR Dimensions MADE BY THIRD PARTIES.