Related Manuals for Sony KV-PG21
Summary of Contents for Sony KV-PG21
- Page 1 4-085-612-12 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-PG21 KV-PG14 © 2001 Sony Corporation...
-
Page 2: Getting Started
Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old batteries nor use different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. •... - Page 3 WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 4: Securing The Tv
TV. Securing the TV KV-PG21 only To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm... -
Page 5: Tv Front And Rear Panels
TV front and rear panels TV rear panel AUDIO VIDEO VIDEO MONITOR TV front panel STANDBY/ WAKE UP VIDEO AUDIO SELECT VIDEO VOLUME CHANNEL VIDEO INPUT Button Function Turn off or turn on the TV. Remote control sensor. STANDBY Standby indicator. WAKE UP Wake Up indicator. -
Page 6: Connecting Optional Components
Connecting optional components Connecting to the video input terminal TV front panel VIDEO AUDIO Audio/Video cable (not supplied) Camcorder VIDEO INPUT TV rear panel Video game equipment AUDIO VIDEO Antenna cable (not supplied) VIDEO Audio/Video cable MONITOR (not supplied) Note •... -
Page 7: Troubleshooting
TV. • Count the number of times the STANDBY indicator flashes. Press ! The STANDBY (main power) to turn off your TV. Contact your nearest Sony service indicator on your TV center. flashes red several times after every three seconds. -
Page 8: Specifications
Specifications Note KV-PG21N70 KV-PG14N70 Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system Color system NTSC3.58, PAL*, PAL 60*, NTSC4.43* * AV IN only Channel coverage VHF: 2 to 13 UHF: 14 to 69 CATV: 1 to 125 8 (Antenna) -
Page 9: Remote Control
Remote control Button Function MUTING DISPLAY POWER – POWER Turn off temporarily or turn on the TV. VIDEO – Display the TV program. – Confirm input number – CH +/– Select channel number. +/– Adjust volume. – SELECT Select the desired items. –... -
Page 10: Setting The Sleep Timer
I Setting the timers You can turn on and off your TV by using the WAKE UP and SLEEP buttons respectively. Setting the Wake Up timer MUTING DISPLAY POWER POWER Press WAKE UP until the desired period of time VIDEO appears on the screen. -
Page 11: Presetting Channels Automatically
J Presetting channels You can automatically preset cable TV, VHF or UHF broadcast channels, or manually preset the channels to receive new channels or channels with a weak signal. Presetting channels automatically MUTING DISPLAY POWER Press ! on the TV to turn on the TV. VIDEO Press CABLE to select “CABLE: ON”. - Page 12 Presetting channels (continued) To change the color system setting If the color is abnormal when receiving programs through the video input terminal. (1) Press SELECT until “COLOR SYS” appears on the screen. (2) Press + or – to select the appropriate color system until the color is optimal. AUTO NTSC3.58 NTSC4.43...
-
Page 13: Customizing The Picture
Customizing the picture You can customize the picture by selecting the picture mode or by adjusting its settings. Selecting the picture mode MUTING DISPLAY POWER Press PIC MODE to select the desired picture mode. VIDEO Select “DYNAMIC” view high contrast pictures. “STANDARD”...