hit counter script
Sony Ipela SNC-CH115 User Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Security Camera
  5. SNC-CH115
  6. User manual

Sony Ipela SNC-CH115 User Manual

Hide thumbs Also See for Ipela SNC-CH115:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
4-199-270-17 (1)

Network Camera

User's Guide
Software Version 1.7
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
SNC-CH115/CH120/CH160/CH220/CH260
SNC-DH120/DH120T/DH160/DH220/DH220T/DH260
SNC-EB520/EM520/EM521
SNC-ZB550/ZM550/ZM551
© 2010 Sony Corporation

Advertisement

Table of Contents
loading

Related Manuals for Sony Ipela SNC-CH115

Summary of Contents for Sony Ipela SNC-CH115

  • Page 1: Network Camera

    4-199-270-17 (1) Network Camera User’s Guide Software Version 1.7 Before operating the unit, please read this manual thoroughly and retain it for future reference. SNC-CH115/CH120/CH160/CH220/CH260 SNC-DH120/DH120T/DH160/DH220/DH220T/DH260 SNC-EB520/EM520/EM521 SNC-ZB550/ZM550/ZM551 © 2010 Sony Corporation...

  • Page 2: Table Of Contents

    Setting the Camera Image — Camera Basic Configuration by the Administrator ..18 Menu ..............39 Common Tab ............39 Focus tab — Adjusting the Focus (SNC-CH115/ Operating the Camera CH120/CH220/EB520/ZB550) ......39 Administrator and User ........19 Focus/Zoom tab — Adjusting the focus/zoom Logging in to System ...........
  • Page 3 ..... 73 Periodical sending Tab — Setting the periodical FTP client activity .......... 74 Setting the Alarm Output — Alarm output Menu (SNC-CH115/CH120/CH160/CH220/CH260/ DH120T/DH160/DH220T/DH260/EB520/EM521/ ZB550/ZM551) ............. 75 Alarm out 1 Tab ..........75 Setting the Operations from the Viewer —...

  • Page 4: Overview

    Overview NOTICE TO USERS © 2010 Sony Corporation. All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to Features any machine readable form without prior written approval from Sony Corporation.

  • Page 5: How To Use This User's Guide

    Printing the User’s Guide Google Chrome Ver.4.0 (Plug-in free viewer only) Depending on your system, certain displays or illustrations in the User’s Guide, when printed out, may SNC-CH115/CH120/CH160/DH120/ differ from those that appear on your screen. DH120T/DH160/EB520/EM520/EM521/ ZB550/ZM550/ZM551 Installation Manual (printed matter)

  • Page 6: Preparation

    Click the Setup icon of SNC toolbox. Preparation The “File Download” dialog opens. When you are using Windows XP Service Pack 2 or The Preparation section explains what the administrator later, Windows Vista or Windows 7, a message regarding the active contents may appear. For has to prepare for monitoring images after installation details, see “Installing software”...
  • Page 7 Select a camera you want to assign an IP address Set the DNS server address. from the list and click Network. The account settings screen is displayed. To obtain the DNS server addresses automatically: Select Obtain DNS server address automatically. To specify the DNS server addresses manually: Select Use the following DNS server address, and type the Primary DNS server address and...

  • Page 8: When Using Windows Xp Service Pack 2 Or Later

    Display sample If the message “File Download – Security Warning” appears, click Run. Program name Note If you select Save in the “File Download – Security Warning” dialog, you will not be able to perform the Note installation correctly. Delete the downloaded file, and If the IP address is not set correctly, the viewer does not click the Setup icon again.
  • Page 9 If the information bar appears, click on the bar and select Select Off in the Windows Firewall dialog. Install ActiveX Control…. If “Internet Explorer – Security Warning” appears, click Install. Program name The installation of ActiveX Control starts. When installation is completed, the main viewer or the Motion detection menu appears.

  • Page 10: When Using Windows Vista

    In the Add Program dialog, select SNC toolbox and When using Windows Vista click OK. Installing software SNC toolbox is added to the Programs and Services list. A warning message regarding the active contents may appear when you install software such as SNC toolbox Click OK.

  • Page 11: Starting The Software

    If the message “File Download – Security Warning” If the message “Information Bar” appears, click Close. appears, click Run. Program name If the information bar appears, click on the bar and select Install ActiveX Control…. Note If you select Save in the “File Download – Security Warning”...
  • Page 12 Click OK to complete the setting. To turn Windows Firewall on Restart Internet Explorer when the above procedure is Select Control Panel from the Start menu of completed and access the camera. Windows. Note Click Windows Firewall. The model on sale in China does not support the SSL function.

  • Page 13: When Using Windows 7

    Click OK. When using Windows 7 Installing software A warning message regarding the active contents may appear when you install software such as SNC toolbox from the CD-ROM. In this case, operate as follows: Example: In case of SNC toolbox If the pop-up “AutoPlay”...
  • Page 14 If the message “File Download - Security Warning” When accessing with Windows 7 in SSL appears, click Run. communications ActiveX control may not function properly. In such a case, change the Internet Explorer settings. For details, refer to “When accessing with Windows Vista in SSL communications”...
  • Page 15 Select Disable Windows Firewall. Select Allow another program..The cameras will be displayed in the list. Add program. To turn Windows Firewall on Select Control Panel from the Start menu of Windows. Click Windows Firewall. Select Allow a program or feature through Windows Firewall.

  • Page 16: Accessing The Camera Using The Web Browser

    When Internet Explorer 6 is used Accessing the Camera “Security Alert” dialog may appear according to the status of the certificate. In this case, click Yes to Using the Web Browser continue. The viewer window is displayed (in SSL communication). After the IP address has been assigned to the camera, check that you can actually access the camera using the Web browser installed on your computer.
  • Page 17 When the viewer of the camera is When using antivirus software, etc., on displayed for the first time the computer “Security Warning” is displayed. When you click Yes, • When you use antivirus software, security software, ActiveX control is installed and the viewer is displayed. personal firewall or pop-up blocker on your computer, the camera performance may be reduced, for example, the frame rate for displaying the image may be lower.

  • Page 18: Basic Configuration By The Administrator

    Basic Configuration by the Administrator You can monitor the camera image by logging in with the initial conditions set for this network camera. You can also set various functions according to the installing position, network conditions or purpose of the camera. We recommend you configure the following items before monitoring images from the camera.

  • Page 19: Operating The Camera

    Operating the Camera Administrator and User This network camera identifies those who log in as the Administrator or User. This section explains how to monitor the image from the The Administrator can use all the functions of this camera using your Web browser (Internet Explorer). network camera, including camera settings.

  • Page 20: Logging In To System

    When you display the main viewer of the Logging in to System camera for the first time When you access the network camera using ActiveX viewer for the first time, the Security Warning appears. Click Yes and install ActiveX Control. You can use all Logging in as a user the functions of the viewer with ActiveX Control.

  • Page 21: Configuration Of Main Viewer

    Control panel section Configuration of Main You can drag the panels to the monitor screen and Viewer configure them. To return to the operation panel, drag the panel and This section explains the functions of the parts and configure the operation panel. controls of the main viewer.

  • Page 22: Camera Control Panel

    Frame rate Zoom control (Displayed only when the camera image is in JPEG.) Press to zoom out, and press to zoom in. Selects the frame rate to transmit images. Zooming continues while the button remains pressed. (Capture) Exclusive control Click this button to display the time remaining for Click to capture a still image shot by the camera and to operation authority.

  • Page 23: Monitor Image

    Click the function button you want to use on the Trigger Monitor image panel. The selected function is activated. The selectable functions are as follows: • send still image files attached to an e-mail (page 27) • send still image files to an FTP server (page 27) •...

  • Page 24: Using Solidptz Function

    Monitor screen Camera list There are two modes for on-screen pan/tilt/zoom The camera list is displayed when Camera list is set to operation using a mouse: Area zoom mode and Vector On in the viewer menu, and at least one camera is dragging mode.

  • Page 25: Controlling Via The Control Panel (Operation Common To Area Zoom Mode And Vector Dragging Mode)

    Controlling via the control panel Panning, tilting and zooming by (Operation common to Area zoom specifying the area (Area zoom mode and Vector dragging mode) mode only) You can operate the camera direction, zoom, and focus Click and hold the left button of the mouse on the by using the control panel for the monitor image monitor image, and drag the mouse diagonally to draw a currently displayed.

  • Page 26: Moving The Camera To A Preset Position (Common Operations In Area Zoom And Vector Dragging Modes)

    Moving the camera to a preset Controlling the Camera on a Full position (Common operations in Image Area zoom and Vector dragging When the camera is in controllable condition, the full image appears on the panorama panel. modes) The full image is the still image of entire area to be shot Select a preset position name from the Preset position by the camera in reduced-sized image.

  • Page 27: Using The Trigger Button

    Controlling Alarm out 1 Using the Trigger Button You can control Alarm out 1. To use this function, you need to make Alarm out 1 You can execute various functions by clicking their active in the Trigger menu of the Administrator menu respective buttons on the Trigger panel.

  • Page 28: Switching Transmission Mode

    Multicast: This protocol is selectable when Switching Transmission Multicast streaming (page 48) is On. When Multicast is selected, RTP (Real-time Transport Mode Protocol) and UDP multicast techniques are adopted for video transmission. By selecting it, the network transmission load of the camera can be You can select the Transmission mode for video/audio reduced.

  • Page 29: Using The System Utility

    Connection tab Using the System Utility You can download system utility from the tools tab on the main menu. You can set the connection method. Select the start-up connection from: TCP, Unicast, and Multicast. If TCP connection is selected, you can configure proxy To use the utility, click Download to begin download.

  • Page 30: Snc Desktop Viewer

    Save tab The operation mode of Solid PTZ have been changed for this device. Audio tab Specify a folder to save the still images and movies to. Note When using the operating system of Windows VISTA or Windows 7, you can not save video if “Enable Protected Mode”...
  • Page 31 Installing the SNC desktop viewer Frame rate Select the frame rate for the image to display on the Click Download. Gadget. When the license agreement policies are displayed on the SNC desktop viewer download screen, agree Image size after reading them carefully and download the SNC Select the image size for the image to display on the desktop viewer.

  • Page 32: Administrating The Camera

    Click the menu name (example: System) on the left Administrating the Camera side of the Administrator menu. The clicked menu appears. This section explains how to set the functions of the Example: “System” menu camera by the Administrator. For details about monitoring the camera image, see “Operating the Camera”...

  • Page 33: Configuration Of The Administrator Menu

    Displays the Alarm output menu for setting the alarm Displays the System menu. (“Configuring the System — output terminal of the camera. (“Setting the Alarm System Menu” on page 34). Output — Alarm output Menu (SNC-CH115/CH120/ CH160/CH220/CH260/DH120T/DH160/DH220T/ DH260/EB520/EM521/ZB550/ZM551)” on page 75) Camera Displays the Camera menu for setting the camera image.

  • Page 34: Configuring The System - System Menu

    Maximum wait number Configuring the System Sets the number of users who are permitted to wait for their turn for control authority during operation by one — System Menu user. The selectable number is from 0 to 5. This is effective when Exclusive control mode is set to On.

  • Page 35: Date & Time Tab

    NTP server 3: Enter the third choice for NTP server Date & time Tab address. DHCP server: Select DHCP server when you need to get NTP server information from DHCP server. Multicast: Select Multicast when you search for an NTP server with Multicast. Time zone Set the time difference from Greenwich Mean Time in the area where the camera is installed.

  • Page 36: Installation Tab

    The maximum image size is 800 × 600. This maximum setting cannot be changed. Image Select whether to superimpose on Image 1 and Image 2 SNC-CH115/CH120/CH160/DH120/ or not, set the font size and configure each item that display position is assigned. DH120T/ZB550/ZM550/ZM551 1280 ×...
  • Page 37 To return to the optimum aspect ratio, capture the full image again in Initialize tab - Capture full image. Camera operating mode (SNC-CH115/ CH120/CH160/CH220/CH260/DH120/ DH120T/DH160/DH220/DH220T/DH260/ ZB550/ZM550/ZM551) You can switch the operating modes of the camera.

  • Page 38: Initialize Tab

    Click Browse and select the file in which the setting data Initialize Tab is stored. Click OK, and the camera is adjusted according to the loaded data, and restarted. Display sample: SNC-CH120 Restore preset position and Privacy Masking settings If you select this, the stored setting data of the camera, the preset position data and the data of the Privacy Masking setting are loaded.

  • Page 39: System Log Tab

    Administrator menu, the Camera menu appears. System log Tab Use this menu to set the functions of the camera. The Camera menu consists of the following tabs. SNC-CH115/CH120/CH220/EB520/ZB550: Common, Focus, Picture, Privacy Masking, Day/ Night, Video codec, and Streaming. SNC-CH160/CH260/DH120/DH120T/DH160/ DH220/DH220T/DH260/EM520/EM521/ZM550/ ZM551: Common, Focus/Zoom, Picture, Privacy Masking, Day/Night, Video codec, and Streaming.

  • Page 40: Focus/Zoom Tab - Adjusting The Focus/Zoom

    Preview screen Preview screen Preview the image and adjust the focus. Preview the image and adjust the focus/zoom. The current image focus position is superimposed when The current image focus/zoom position is superimposed adjusting the focus. when adjusting the focus/zoom. For the details on each button, refer to the Control bar of For the details of each button, please refer to the Control the Plug-in free viewer (page 24).

  • Page 41: Picture Tab

    Picture Tab Select the maximum gain value of the automatic You can set the color conditions, exposure, etc., of the exposure setting as follows. camera. 42, 36, 30, 24, 18, 12, 6, Off (db) If you select Off, the automatic exposure setting by gain control is not performed.

  • Page 42: Privacy Masking Tab

    Gamma setting Privacy masking tab Set the gamma curve in the camera. Depending on Using the privacy masking enables you to hide images subject or recording conditions, the following settings by masking specified parts of the images when will be available: streaming.

  • Page 43: Day/Night Tab

    For details on Easy Focus, refer to the “Focus tab — For details on each button, refer to the Control bar of the Adjusting the Focus (SNC-CH115/CH120/CH220/ Plug-in free viewer (page 24). EB520/ZB550)” (page 39) and “Focus/Zoom tab —...

  • Page 44: Video Codec Tab

    • SNC-EB520/EM520/EM521 do not support this Maximum Strength: From low to high, Maximum function. strength for IR illuminator is graded from level1 to level6. Cropping (SNC-CH115/CH120/CH160/CH220/ Washed-out image control (SNC-CH160/CH260/ CH260/DH120/DH120T/DH160/DH220/DH220T/ DH160/DH260) DH260/ZB550/ZM550/ZM551) Setting to prevent image wash-out by the IR You can crop a portion of the image and display the illuminator when using night mode.
  • Page 45 Notes (Maximum image size selection is not available.) • This function is not available if Letterbox or Cropping Image 1 Image 2 are set to On (SNC-CH115/CH120/CH160/CH220/ 800 × 600 CH260/DH120/DH120T/DH160/DH220/DH220T/ 720 × 576 DH260). • This function is not available if Letterbox, Cropping, 720 ×...
  • Page 46 × × 320 × 240 704 × 576 × × 720 × 480 × × SNC-CH115/CH120/CH160/DH120/DH120T/ DH160/ZB550/ZM550/ZM551 640 × 480 × Maximum image size [1280 × 720], [1280 × 1024] 640 × 368 Image 1 Image 2 384 × 288 ×...
  • Page 47 MPEG4 JPEG image size of image 2 is “640 × 480” JPEG JPEG Image 1 Image 2 Codec Frame rate Codec Frame rate SNC-CH115/CH120/CH160/DH120/DH120T/ (fps) (fps) DH160/ZB550/ZM550/ZM551 H.264 Image size [1280 × 720] Single MPEG4 codec Image 1 Image 2...

  • Page 48: Streaming Tab

    Selectable bit rates are as follows: Video port number 1, 2 64, 128, 256, 384, 512, 768, 1024, 1536, 2048, 3072, Specify the transmission port number of the MPEG4/ 4096, 5120, 6144, 7168, 8192 (kbps) H.264 video data. It is initially set to 50000. Specify an even number from 1024 to 65534.

  • Page 49: Configuring The Network - Network Menu

    Network type (SNC-ZB550/ZM550/ZM551) Configuring the Network Displays the network type. SLOC is displayed when the network change selection — Network Menu switch is set to SLOC, and LAN is displayed when the network change selection switch is set to LAN. When you click Network in the Administrator menu, the...

  • Page 50: Qos Tab

    Primary DNS server Prefix Type the IP address of the primary DNS server. Enter the Prefix value. (0 to 128) Secondary DNS server IPv6 MTU Type the IP address of the secondary DNS server, if Enter the MTU value for IPv6. (1280 -1500) necessary.
  • Page 51 Subnet Enter the subnet mask values of the target on which to Select the number to use when registering on the QoS perform QoS. table. When you select a registered number, the registered QoS information is displayed. The subnet mask value represents the number of bits Network address from the left side of the network address.

  • Page 52: Dynamic Ip Address Notification Tab - Notifying The Ip Address

    QoS table Note Displays the list of registered QoS information. If multiple conditions match, the rule with the smallest The model on sale in China does not support the TLS number has priority. function. STARTTLS To attain QoS of data traffic, the target device must be To use the encryption function by STARTTLS, set to connected to a router or switch that supports the QoS function.

  • Page 53: Http Notification

    The standard port number is 110. If TLS is enabled, the http:// [IPv6 address] standard port number for POP3s is 995. http:// [IPv6 address]: port [:port]: Specify the port number to which you want to connect. If you want to use the established port Authentication mode number 80, you do not need to input a value.

  • Page 54: Setting The Ssl Function - Ssl Menu

    When you use SSL connection for the first time Setting the SSL function When you use SSL connection only with the SSL function On, you cannot access the camera if the SSL — SSL Menu function does not work properly. In this case, you must reset the camera to the factory settings.

  • Page 55: Private Key Password

    Use a self-signed certificate (For test use): This mode To display certificate information uses the certificate and private key pair generated by When the certificate has been set in the camera correctly, “Generating a self-signed certificate” on page 55. its information appears on Status, Issuer DN, Subject Private key information corresponding to the DN, Validity Period and Extended Key Usage.

  • Page 56: Ca Certificate Tab - Adding The Ca Certificate For Client Authentication

    To import the CA certificate Note Click Cancel at the bottom of the menu if you want to Click Browse… to select the CA certificate to be cancel changing the private key password after clicking saved in the camera. Reset. Doing so restores the other setting items in the Client certificate tab to the previous settings.

  • Page 57: How To Install The Ca Certificate

    Click Next. How to install the CA certificate The camera may not be connected because the browser (Internet Explorer) does not display whether the certificate will be accepted or not due to the type of certificate. In this case, install the CA certificate as follows.

  • Page 58: To Remove An Installed Ca Certificate

    Select Certificates from the list, then click Add. To remove an installed CA Certificate Snap-in is displayed. certificate Select Computer account as the certificate administrated in this Snap-in, then click Next. In Internet Explorer, click in the order Tools, Internet options, Content tab and Certificates. Select Local Computer as the computer The Certificates dialog appears.

  • Page 59: Using The 802.1X Authentication Function - 802.1X Menu

    Supplicant Using the 802.1X A supplicant is a device that connects to the authentication server to join the network. This unit Authentication Function serves as a supplicant in the 802.1X network. The supplicant can enter the 802.1X network after — 802.1X Menu appropriate authentication by the authentication server.

  • Page 60: Client Certificate Tab

    Wired interface status Client certificate Tab Shows the authentication status of the 802.1X authentication function for wired ports. When TLS is selected as the EAP method, client Click Refresh to update the status. certificate is imported for authentication at the camera. EAP identity Type the user name to identify the client in the 802.1X authentication server using 3 to 253 characters.

  • Page 61: Ca Certificate Tab

    CA certificate Tab Note When the client certificate to be imported is of You can import a trusted CA certificate (server PKCS#12 format and the private key password is not set certificate or route certificate) to the camera. Up to four correctly, “<Put correct private key password>”...

  • Page 62: Setting The 802.1X Authentication Function - Example Of Windows Server 2003

    Select New from the context menu, then select Setting the 802.1X authentication Group and configure the group for 802.1X function — Example of Windows connection. For example, the group “Wired_802.1X_Group” is Server 2003 assumed for explanation purposes. This section explains how to configure the authentication server and CA using Microsoft Windows Configuring the Internet Authentication Server 2003.
  • Page 63 Set the following items: The “Microsoft Certificate Services” page opens. Friendly name: Type “authenticator” as an example. Client address (IP or DNS): IP address of the authenticator Client-Vender: RADIUS Standard Shared secret: Specify the shared secret to be set in the authenticator. Adding a user Open Active Directory Users and Computers from Administrative Tools of Windows menu.
  • Page 64 Type the log-in user name and password correctly. Click Next and select as follows. The “Microsoft Certificate Services” page opens. Do you want to export the private key with the certificate?: Select Yes, export the private key. Click Request a certificate, advanced certificate Select the format you want to use: Select request and Create and submit a request to this Personal Information Exchange –...

  • Page 65: Setting The User - User Menu

    Viewer authentication Setting the User Set whether the user is authenticated or not when the main viewer is displayed. — User Menu On: The main viewer is displayed in accordance with the viewer mode of the authenticated user. When you click User in the Administrator menu, the Off: Select the viewer mode of the main viewer which is...

  • Page 66: Setting The Security - Security Menu

    Setting the Security Saving the Camera Position and Action — Security Menu — Preset position Menu When you click Security in the Administrator menu, the Security menu appears. When you click Preset position in the Administrator This allows you to control which computers can have menu, the Preset position menu appears.

  • Page 67: Home Position Setting

    Home position setting Click the Set button. The camera position is saved. Set the current camera position as the home position. Call Click to move the camera to the preset position. Click to save the current pan, tilt and zoom positions as the home position.

  • Page 68: Preset Tour Tab - Setting A Position Tour

    On: The tour operates. Preset tour Tab — Setting a Off: The tour does not operate. position tour Note The camera moves to the programmed positions sequentially (Tour). If nothing is added to the Sequence list and you click Up to five programs can be set as Tours A to E. OK when On is selected, the tour function will fail.

  • Page 69: Sending An Image Via E-Mail - E-Mail (Smtp) Menu

    OK/Cancel Sending an Image via See “Buttons common to every menu” on page 32. E-mail — e-Mail (SMTP) Menu e-Mail (SMTP) When you click in the Administrator menu, the e-Mail (SMTP) menu appears. Using the e-Mail (SMTP) function, you can send an e-mail with an attached image file that has been shot linked with an external sensor input or with the built-in detection functions.

  • Page 70: Pop Server Name

    POP port number Note Enter a port number from 110 to 65535. The model on sale in China does not support the TLS The standard port number is 110. If TLS is enabled, the function. standard port number for POP3s is 995. STARTTLS Authentication mode Select Login or CRAM-MD5 as the authentication...

  • Page 71: Alarm Sending Tab - Setting The E-Mail Sending Mode When Detecting The Alarm

    File attachment Alarm sending Tab — Setting the Set whether an image file (JPEG file) is to be attached to e-mail sending mode when the e-mail or not. detecting the alarm When On is selected, the image file made using the settings below is attached.

  • Page 72: Periodical Sending Tab - Setting The Periodical E-Mail Sending Mode

    Effective period Image file name Set the period during which alarm detection is effective. Type the file name of the image attached to the e-mail using up to 10 alphanumeric characters, – (hyphen) and Always: Alarm detection is always effective. _ (under score).

  • Page 73: Sending Images To Ftp Server - Ftp Client Menu

    Passive mode Sending Images to FTP Set whether you use the passive mode of FTP server or not when connecting to the FTP server. Select On to Server — FTP client Menu connect to the FTP server using the passive mode. When you click FTP client in the Administrator menu,...

  • Page 74: Periodical Sending Tab - Setting The Periodical Ftp Client Activity

    Remote path Effective period Type the path to the destination using up to 64 Set the period during which alarm detection is effective. characters. Always: Alarm detection is always effective. Schedule: You can specify the period during which Image file name alarm detection is effective.

  • Page 75: Setting The Alarm Output - Alarm Output Menu (Snc-Ch115/Ch120/Ch160/Ch220/Ch260/ Dh120T/Dh160/Dh220T/Dh260/Eb520/Em521/ Zb550/Zm551)

    Click Schedule and the menu for the effective period on page 78) is displayed. (“Setting the Schedule — Schedule Menu” on page 78) OK/Cancel See “Buttons common to every menu” on page 32. Setting the Alarm Output — Alarm output Menu (SNC-CH115/CH120/CH160/CH220/CH260/DH120T/DH160/DH220T/DH260/EB520/EM521/ ZB550/ZM551)

  • Page 76: Setting The Operations From The Viewer - Trigger Menu

    Day/Night: Controls the alarm output linked to the day/ Setting the Operations night function. from the Viewer — Trigger Sensor input 1 Select this option when you link the alarm output to an Menu external sensor that is connected to sensor input of the camera I/O port.

  • Page 77: Alarm Output

    FTP client When you click Day/Night, the Trigger-Day/Night menu is displayed. You can set the necessary options Checking this box allows you to select FTP client on the here. The setting options and setting procedures are the Trigger panel in the main viewer. same as those in the Day/Night tab of the Camera menu By clicking FTP client a still image of the moment you (page 43).

  • Page 78: Setting The Schedule - Schedule Menu

    Setting the Schedule Setting the Sensor input/ Camera tampering — Schedule Menu detection/Motion When you click Schedule in the Administrator menu, the Schedule menu appears. detection The Schedule menu consists of 6 tabs. This is the same menu as the Schedule menu that is —...

  • Page 79: Motion Detection Tab - Set The Motion Detection

    • The Motion detection menu may not be displayed depending on the function settings. To display the Motion detection menu, configure as follows. System menu- Installation tab (page 36) – Monitor out: Off. (SNC-CH115/CH120/CH160/ CH220/CH260/DH120/DH120T/DH160/DH220/ DH220T/DH260/EB520/EM520/EM521) – Video Out: Off (SNC-ZB550/ZM550/ZM551) Camera menu-Video codec tab (page 44) –...
  • Page 80 VMD settings (VMD: Motion detection) Delete Area Clicking this button will change the cursor to a Set detection area, detection response, detection button. While the cursor is a button, click on a part response speed and detection size for Motion detection. of the area to delete that area.

  • Page 81: Configuring The Viewer - Viewer Menu

    Detection size Configuring the Viewer Specify the minimum detection size and maximum detection size of motion detection. To specify the — Viewer Menu detection size, you can either enter values or drag the vertexes of the area. Click Viewer in the Administrator menu to display the Viewer menu.
  • Page 82 ActiveX viewer: Displays the ActiveX viewer at time of Logo access. To set the logo image, click Browse and specify the Plug-in free viewer: Displays the Plug-in free viewer at image to display. The image file format that can be used time of access.
  • Page 83 Text1 text, Text2 text and Text3 text PTZ control bar: Display the PTZ operation bar when Enter the text to be displayed on the viewer screen. streaming starts. Vector dragging: Vector drag is available when streaming starts. Text1 link, Text2 link and Text3 link Specify the URL of the link to assign a link to the text.

  • Page 84: Html Output Tab

    Note This unit is not equipped with audio functions. Capture image: Displays the Capture image button, if it is checked. Image codec: Displays the setting menu of Image codec, if it is checked. OK/Cancel See “Buttons common to every menu” on page 32. HTML output tab If the monitor is for personal use, this tab can be used to output sample source for HTML and script.

  • Page 85: Using The Snc Toolbox

    How to use SNC toolbox Others Menu bar Function buttons This section explains how to use the application software and commands, including the supplied CD- ROM. Using the SNC toolbox Explains the functions except those of the Network tab in SNC toolbox. To install SNC toolbox, to assign an IP address and to set the network, see “Assigning the IP Address to the Device tree display...

  • Page 86: Device List

    Privacy Masking: Displays the Privacy Masking Setting screen. Displays the settings screen for the device. Panorama Creator: Displays the Panorama Creator screen. Task Not available with this product. Displays the Task List dialog. Custom Homepage: Displays the Custom Homepage screen. Device tree view Firmware Upgrade: Displays the Firmware Upgrade This function allows you to customize folders.

  • Page 87: Registering In My Device

    Model Registering a device Displays the model name. To register a device, follow the procedure below: • Registering by Add Device Entry dialog Serial No. • Registering by drag & drop Displays the serial number. • Registering by copy & paste Version No.

  • Page 88: Changing The Device List Display Method

    Click OK to finish registration. Changing the Device list display method Registering by drag & drop To add a device, select a device from the Device list in the Search result folder, and drag & drop to the folder to Details display register it in.

  • Page 89: Setting Snc Toolbox Options

    Modifying the items to show on list Firmware Upgrade Make settings related to firmware upgrades. Select Column setting from the View menu to display the “Column Setting” dialog. Device setting backup folder: Set the backup folder for the setting file when an upgrade is performed. Click Browse to display the folder selection dialog and specify the folder in which to save the file.

  • Page 90: Using Privacy Masking - Masking A Camera Image

    – SolidPTZ (page 44) is On. Notes Viewer • When you have changed the SSL setting, restart the Privacy Masking screen SNC toolbox. • The model on sale in China does not support the SSL function. Log tab Overwrite the oldest log file Viewer To set the size of the log file, check Enable and specify A live image of the camera is displayed.

  • Page 91: Using The Custom Homepage - Setting The Customized Homepage

    Color Note Specify the color or mosaic of privacy masks. This setting is common to every privacy mask. If you cannot establish communications with the The selectable colors are as follows: camera using the proxy server being used, connect Black, Gray1, Gray2, Gray3, Gray4, Gray5, Gray6, the camera to the local network and run the Custom White, Red, Green, Blue, Cyan, Yellow, Magenta Homepage without using the proxy server.

  • Page 92: Using The Schedule Task

    Click Start upgrading. Upgrading starts. Notes • To stop upgrading, click Stop upgrading. To protect some devices, during the process of upgrading, upgrading cannot be canceled. • Do not turn off the power until the device restarts after upgrading. Using the Schedule Task You can specify the time or interval to change the Device setting or perform Firmware upgrade.
  • Page 93 Creating a task Select Device Setting or Firmware Upgrade. Click Add. Displays Task Wizard. Click Next. For Device Setting: Edit the value for the setting you wish to change. Click Next. See “Device Setting” on page 94 for changing the values.

  • Page 94: Configuring The Device Setting

    Recurrence pattern Setting tree Specify the operation interval. All settings are sorted into categories. Click + to display Onetime: Runs the task once. the subcategories under a category. Click – to hide the Hourly: Specify the operation frequency in units of subcategories.
  • Page 95 74 Adding the CA certificate for client authentication” on Alarm Output “Setting the Alarm Output page 56 — Alarm output Menu (SNC-CH115/CH120/ 802.1X “Using the 802.1X CH160/CH220/CH260/ Authentication Function — DH120T/DH160/DH220T/ 802.1X Menu” on page 59...

  • Page 96: Device Restart And Initialization

    Device restart and initialization Using the SNMP You can restart and initialize (restore factory default) a selected device. Multiple devices can be selected This unit supports SNMP (Simple Network simultaneously for restart and initialization. Management Protocol). You can read MIB-2 objects using software such as SNMP manager software.

  • Page 97: Setting Commands

    4 Describes the case of “mib-2.system. sysName=<string> sysContact.0”. This field is used to describe Set the case of “mib-2.system.sysName.0” in the information on the administrator of this camera. <string> position. The maximum length of <string> Nothing is set at the factory. is 255 characters.

  • Page 98: Glossary

    DHCP server Glossary Acronym for Dynamic Host Configuration Protocol server. The IP address of a terminal without an individual IP address can be automatically distributed by ActiveX control the Dynamic Host Configuration Protocol (DHCP). The A component program object that can be used with web DHCP server assigns the IP addresses to the terminals.

  • Page 99: Proxy Server

    H.264 Primary DNS server An image compression format. The standard written by One of the DNS servers that can first reply to a request the JVT (Joint Video Team) a joint organization for by connected devices or other DNS servers. standardization (composed of ISO and ITU-T.

  • Page 100: Subnet Mask

    SMTP server 802.1X A server for sending or relaying e-mail messages A standard that performs user authentication and between servers. dynamic key generation and traffic on a LAN. SNMP A protocol for monitoring and managing network devices. Acronym for Secure Sockets Layer. This is a protocol developed by Netscape Communications Corporation to be used for communications of encrypted data on the Internet.

  • Page 101: Index

    Color ..........39 FTP client function......73 Index Common......39 FTP client Menu......73 Common name ....... 98 FTP server ........73 control authority......34 FTP server name ......73 Numerics control panel........25 Cropping ........44 802.1X........59 Current date & time ....... 35 Glossary .........
  • Page 102 Preset tour........68 SNMP ..........96 Primary DNS server .......50 Software version......34 MAC address........49 Privacy Masking tab .......42 SolidPTZ ........24 Main viewer........21 Private key password ......61 special tags ........53 Masking..........90 Proxy port number......53 Speed ..........68 Maximum wait number ....34 proxy server........53 SSL Menu........54 Message........
  • Page 103 Viewer authentication ....65 Viewer Menu........81 Viewer mode ......19 welcome page ........ 16 Windows Firewall ......9 Windows Vista ....... 10 Windows XP Service Pack 2.... 8 WPA ..........100 WPA2 ........... 100 Zoom ........22 Sony Corporation Index...

This manual is also suitable for:

Ipela snc-ch220Ipela snc-ch260Ipela snc-dh120Ipela snc-dh120tIpela snc-dh160Ipela snc-dh220 ... Show all

Table of Contents