40" DUAL FUEL RANGE INSTALLATION INSTRUCTIONS
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
OBSERVE ALL GOVERNING CODES AND ORDINANCES.
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death.
FOR YOUR SAFETY:
— Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
— WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance.
•
Do not touch any electrical switch; do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
instructions.
•
If you cannot reach your gas supplier, call the fire department.
— Installation and service must be performed by a qualified installer, service agency or the gas supplier.
40 1/8" Min.
(101.9 cm Min.)
2 ¾" Min.
(7 cm Min.) for
open door.
On left side
only, if there is a
wall
E
F
Grounded
Wall Outlet
Do not pinch the power supply cord between the range
and the wall.
Do not seal the range to the side cabinets.
NOTE: 24" (61 cm) minimum clearance between the
cooktop and the bottom of the cabinet when the bottom
of wood or metal cabinet is protected by not less than
A. HEIGHT
B. WIDTH
48 1/8" (122.2 cm)
40 1/8" (101.9 cm)
Printed in United States
(Models with Electric Ovens and Gas Cooktop)
See
note
18" Min.
13" Max.
(45.7 cm Min.)
(33 cm Max.)
If there is a wall:
2 ½" Min.
(6.4 cm Min.)
Right side
24" Min.
(61 cm Min.)
24 1/2" Max.
(62.2 cm Max.)
C. DEPTH TO FRONT
OF RANGE
26¼" (66.7 cm)
with handle 28½" (72.4)
36 3/8"
(92.4 cm)
¼" (0.64 cm) flame retardant millboard covered with
not less than No. 28 MSG sheet metal, 0.015" (0.4 mm)
stainless steel, 0.024" (0.6 mm) aluminum, or 0.020" (0.5
mm) copper.
30" (76.2 cm) minimum clearance when the cabinet is
unprotected.
D. DEPTH WITH
E. MINIMUM
DOOR OPEN
CUTOUT WIDTH
44 5/8" (113.3 cm)
40 1/4" (102.2 cm)
1
36"
(91.4 cm)
with feet
extended
F. HEIGHT OF
COUNTERTOP
36" (91.4 cm) standard
35 7/8" (91.1 cm) min.
P/N 318201764 (0907) Rev. A
English - pages 1-8;
Wiring Diagram - page 9-10