Connecting Lan Cable; Disconnecting Lan Cable - Toshiba Qosmio G30 User Manual
Portable personal computer
Hide thumbs
Also See for Qosmio G30:
- User manual (302 pages) ,
- User manual (272 pages) ,
- Maintenance manual (460 pages)
Table of Contents
Advertisement
Operating Basics
Connecting LAN cable
To connect the LAN cable, follow the steps below.
■
Connect the AC adaptor before connecting the LAN cable. The AC
adaptor must remain connected during LAN use. If you disconnect the
AC Adaptor while the computer is accessing a LAN, the system may
hang up.
■
Do not connect any other cable to the LAN jack except the LAN cable.
Otherwise, malfunctions or damage may occur.
■
Do not connect any power supplying device to the LAN cable that is
connected to the LAN jack. Otherwise, malfunctions or damage may
occur.
1. Turn off the power to the computer and to all external devices
connected to the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.
3. Plug the other end of the cable into a LAN hub connector.
Check with your LAN administrator before connecting to a hub.
When the computer is exchanging data with the LAN, the LAN Active
indicator glows orange. When the computer is connected to a LAN hub but
is not exchanging data, the Link indicator glows green.
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
Make sure the LAN Active indicator (orange LED) is out before you
disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer's LAN jack and pull
out the connector.
2. Disconnect the cable from the LAN hub in the same manner.
Check with your LAN administrator before disconnecting from the hub.
4-34
Figure 4-10 Connecting the LAN cable
LAN jack
User's Manual
- Quick Links:
- Key Operation
- Hardware
Hide quick links:
Advertisement
Table of Contents
