Page 1 Series User’s Guide If you need assistance: ❖ Toshiba’s Support Website pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 281 in this guide.
Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Website at pcsupport.toshiba.com ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1) il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à...
Page 10 Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Page 11 Caution: Exposure to Radio Frequency Radiation The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 12 Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range. FCC requires this product to be used indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems.
Page 13: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 14: Radio Approvals For Wireless Devices
Approval Number: D01-1128JP TELECOM ENGINEERING CENTER Approval Number: 03NY.A0018, 03GZDA0017 The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio approvals for wireless devices NOTE The following information is dependent on what type of wireless device is in...
Page 15 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 17 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 18 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 19 Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 20: Bluetooth Wireless Technology Interoperability
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 21: Bluetooth Wireless Technology And Your Health
Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Page 22 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 23 Taiwan Article 14 Unless approved, for any model accredited low power radio frequency electric machinery, any company, trader or user shall not change the frequency, increase the power or change the features and functions of the original design. Article 17 Any use of low power radio frequency electric machinery shall not affect aviation safety and interfere with legal communications.
Page 24 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 25 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 26 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 27 ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Page 28: Table Of Contents
Other precautions ...47 Important information on your computer’s Setting up your computer ...49 Setting up your software...50 Registering your computer with Toshiba ...51 Adding external devices ...51 Connecting to a power source ...52 Using the main battery...55 cooling fan ...49...
Page 29 Using the computer for the first time ...56 Opening the display panel ...56 Your computer’s features and specifications ...57 Turning on the power ...57 Using the TouchPad™...59 Scrolling with the TouchPad™ ...59 Using the Control buttons ...60 Disabling or enabling the TouchPad ...60 Installing additional memory (optional) ...61 Removing a memory module...65 Using an external keyboard...67...
Page 30 Powering down the computer ...108 Using the Turn off command ...108 Using Hibernation Mode ...110 Using Stand By Mode ...113 Toshiba’s online resources ...116 Chapter 3: Mobile Computing... 117 Toshiba’s energy-saver design...117 Running the computer on battery power ...118 Battery Notice ...118 Power management ...119...
Page 31 Using additional batteries ...120 Charging the batteries...120 Charging the main battery...121 Charging the RTC battery...121 Monitoring battery power ...123 Determining remaining battery power...123 What to do when the battery runs low ...125 Setting battery alarms...125 Conserving battery power ...126 Power profiles...127 Using a hot key to set the power profile...127 Changing the main battery ...128 Removing the battery from the computer ...129...
Page 32 Playing an audio CD...160 Playing a DVD ...161 Watching television...163 Connecting an External Device...164 Toshiba Qosmio Remote Control ...165 Installing the QosmioPlayer Recovery media ...170 Chapter 5: Getting to Know the Windows Media Center Edition 2005... 171 Media Center Setup...172 Connecting to a Television ...172...
Page 33 Selecting a Program from the TV Guide...193 Watching a Recorded TV Program...195 Changing a scheduled recording...195 Searching for a TV Program to Watch ...196 Recording TV ...197 Recording TV tips ...199 Recording from the Guide...200 Recording from Search...200 Recording Manually ...201 Changing Your Settings ...202 Changing recording priorities ...203 Watching and Recording Movies ...203...
Page 34 Contents Changing the Media Center Settings ...220 More Programs...229 Online Spotlight ...230 Getting Help for Media Center...231 Chapter 6: Toshiba Utilities... 232 Fn-esse Starting Fn-esse Using the keyboard or pointing device to Viewing existing key assignments...236 Changing or removing existing key Hotkey Utility ...237...
Page 35 RAID-0 ...257 RAID-1 ...258 When you first start your computer ...259 Creating a new RAID-0 array...261 TOSHIBA RAID Console Utility...263 Defining options for RAID-0 or RAID-1...266 Viewing the status of an array...269 Viewing the status of a hard disk drive ...271 Performing a media check on a RAID-1 array .273...
Page 36 Modem problems...306 Develop good computing habits ...306 If you need further assistance...307 Before you contact Toshiba ...308 Contacting Toshiba ...308 Other Toshiba Internet Web sites ...309 Toshiba’s worldwide offices...310 Appendix A: Hot Keys... 312 Volume Mute ...312 Instant password security...313 Power usage profile ...313...
Page 37 Appendix C: Using ConfigFree™ with your Toshiba Computer... 320 Getting Started...321 Starting ConfigFree ...321 ConfigFree Utilities...323 Connectivity Doctor ...323 Search for Wireless Devices ...326 Profile Settings ...331 ConfigFree SUMMIT...334 Quick Connect...339 Using the Automatic Switch...342 Semi-Automatic Switch Feature ...343 Glossary... 344 Index...
Page 38: Introduction
Toshiba's Web site at While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 39: This Guide
This guide This guide introduces the computer’s features. You can: ❖ Read the entire guide from beginning to end ❖ Skim through and stop when a topic interests you ❖ Use the table of contents and the index to find specific information Safety icons This manual contains safety instructions that must be...
Page 40: Other Icons Used
Other documentation Your computer comes with the following documentation: ❖ An electronic version of the user’s guide ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com.
Page 41: Service Options
Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see “If Something Goes Wrong” on page...
Page 42: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, describes how to connect components, and explains what to do the first time you use your computer. Selecting a place to work Your computer is designed to be used in a variety of locations and situations.
Page 43: Keeping Yourself Comfortable
To keep your computer in prime operating condition, protect your work area from: ❖ Dust, moisture, and direct sunlight ❖ Equipment that generates a strong electromagnetic field, such as stereo speakers (other than the speakers that are connected to the computer) or speakerphones ❖...
Page 44 Getting Started Selecting a place to work This section provides hints on avoiding strain and stress injuries. For more information, consult books on ergonomics, repetitive-motion injury, and repetitive-stress syndrome. Using the computer keyboard incorrectly may result in discomfort and possible injury. If your hands, wrists, and/or arms bother you while typing, stop using the computer and rest.
Page 45 Below eye level Footrest Correct posture and positioning of the computer ❖ Position your chair so that the keyboard is at or slightly lower than the level of your elbow. You should be able to type comfortably with your shoulders relaxed and your forearms parallel to the floor.
Page 46 Getting Started Selecting a place to work ❖ Avoid placing your computer in front of a bright light that shines directly into your eyes. ❖ If possible, use soft, indirect lighting in your computer work area. Your LCD display has a brightness approaching that of a TV device.
Page 47: Other Precautions
Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes. Other precautions Your notebook computer is designed to provide optimum safety and ease of use, and to withstand the rigors of travel.
Page 48 Getting Started Selecting a place to work Some PC Cards can become hot with prolonged use. Overheating of a PC Card can result in errors or instability in its operation. Be careful when you remove a PC Card that has been used for a long period.
Page 49: Important Information On Your Computer's Cooling Fan
computer virus. You need a special program to check for viruses. Ask your dealer to help you. Important information on your computer’s cooling fan Your computer may have a CPU cooling fan that cools the CPU by drawing outside air into the computer. The cooling fan may be located on the bottom of the computer.
Page 50: Setting Up Your Software
Getting Started Setting up your computer To use external power or to charge the battery, you must attach the AC adapter. See on page Setting up your software The names of windows displayed, and the order in which NOTE windows appear, may vary according to your software setup choices.
Page 51: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 52: Connecting To A Power Source
Getting Started Connecting to a power source ❖ Connect external speakers or headphones (see external speakers or headphones” on page ❖ Connect a microphone (there is also an internal microphone) (see ❖ Connect a digital or plasma TV (see digital or plasma television or VCR/DVD player” on page ❖...
Page 53 Use only the AC adapter supplied with your computer or an equivalent adapter that is compatible. Use of any incompatible adapter could damage your computer. Toshiba assumes no liability for any damage caused by use of an incompatible adapter.
Page 54 Getting Started Connecting to a power source Plug the AC adapter cord into the DC-IN on the back of the computer. Sample connecting the AC adapter cord to the computer Connect the power cord/cable to a live electrical outlet. Damaged power cords/cables can cause fire or electric shock. Never modify, forcibly bend, place heavy objects on top of, or apply heat to the power cord/cable.
Page 55: Using The Main Battery
❖ Is off (no illumination) when the computer is not connected to an external power source (for information on determining battery power, see power” on page 123 If the battery light flashes amber during charging, either the battery pack is malfunctioning, or it is not receiving correct input from the AC power supply.
Page 56: Using The Computer For The First Time
Getting Started Using the computer for the first time TECHNICAL NOTE: The RTC battery does not charge while the computer is turned off, even when AC power is attached. The RTC battery charges when the computer is powered on. Battery life and charge time may vary depending on the NOTE applications, power management settings, and features used.
Page 57: Your Computer's Features And Specifications
Over a period of time, and depending on the usage of the NOTE computer, the brightness of the LCD screen will deteriorate. This is an intrinsic characteristic of LCD technology. The screen may be dimmer when the computer is operated on battery power.
Page 58 Getting Started Using the computer for the first time Check to ensure that all disc drives are empty. Press and hold the power button until the on/off light on the system indicator panel glows blue—approximately one second. An indicator light on the front of your computer lets you know the system indicator status when the display is closed.
Page 59: Using The Touchpad
Using the TouchPad The TouchPad, the small square cutout located in front of the keyboard, is sensitive to touch. To move the cursor, simply move your finger on the TouchPad in the direction you would like to move the cursor: ❖...
Page 60: Using The Control Buttons
Getting Started Using the TouchPad™ Using the Control buttons When a step instructs you to click or choose an item, move the cursor to the item, then press and release the primary (left-hand) button. To double-click, press the primary button twice in rapid succession.
Page 61: Installing Additional Memory (Optional)
Toshiba Web site at accessories.toshiba.com). There are two memory slots. Your system may have both slots occupied.
Page 62 Getting Started Installing additional memory (optional) You need a standard Phillips no.1 screwdriver for this procedure. To avoid damaging the computer’s screws, use a standard Phillips no. 1 screwdriver that is in good condition. The computer has two memory module slots—Slot A and Slot B.
Page 63 Installing additional memory (optional) Remove the battery (see page 128). Using a standard Phillips no. 1 screwdriver, loosen the captive screw that secures the memory module slot cover, then remove the memory module slot cover. Sample removing the memory module slot cover Place the memory module slot cover in a safe place so that you can retrieve it later.
Page 64 Getting Started Installing additional memory (optional) Holding the memory module by its edges so that the gold connector bar faces the slot, fit the memory module into the socket. Gently press down on the memory module connector until the clips snap into place. Do not force the memory module into position.
Page 65: Removing A Memory Module
You can now continue setting up the computer. When the operating system has loaded, you can verify that the computer has recognized the additional memory. If you are adding extra memory after setting up the computer, verify that the computer has recognized it correctly as described in Removing a memory module To remove the memory module:...
Page 66 Getting Started Installing additional memory (optional) Place the screw and the cover in a safe place so that you can retrieve them later. Pull the clips away from the memory module. The memory module pops partially out of the slot. Carefully remove the module from the slot.
Page 67: Using An External Keyboard
Click System. The General tab view automatically appears and shows total memory. If the computer does not recognize the memory configuration, turn off the computer, remove the memory slot cover, and make sure the memory module is seated properly, as described in step memory (optional).”...
Page 68 Getting Started Connecting a local printer Your printer documentation may require you to install the printer software before physically connecting the printer to your computer. If you do not install the software as instructed by the printer manufacturer, the printer may not function correctly.
Page 69: Setting Up Your Printer
Setting up your printer Setting up a printer involves selecting a printer driver. This special program acts as a translator that turns your document into a form the printer can understand. If you are using any non-Windows driver for each of those programs. Refer to your program’s documentation for more information.
Page 70: Using The Optional External Usb Diskette Drive
Getting Started Using the optional external USB diskette drive Follow the on-screen instructions to set up your printer. TECHNICAL NOTE: Some printers require a specific installation process. Refer to your printer installation guide for instructions. Using the optional external USB diskette drive The optional external USB diskette drive allows you to use diskettes and is useful for installing software on the hard disk, exchanging information with other systems, and making...
Page 71: Connecting External Display Devices
Sample connecting an optional external USB diskette drive Connecting external display devices Your computer comes with a built-in LCD display, but you can also connect the following types of external display devices to the video ports described below: ❖ A plasma or digital television or VCR/DVD player via the Component Video Out port ❖...
Page 72: Connecting The Display Device
To connect a device to the S-video port, you must purchase an S-video cable. For the best video quality, always use a properly shielded cable. HINT: Toshiba recommends using a cable no longer than 20 feet (approximately 6 meters). Using a poor-quality cable may result in a dull or fuzzy picture, poor color, ghosting, video noise, or loss of video.
Page 73: Dvd Player
Connecting a digital or plasma television or VCR/ DVD player TECHNICAL NOTE: You must have digital TV service to watch digital TV on your computer. See your TV service provider for more information. You can watch digital television by connecting to the Component Video Out port on your computer.
Page 74 Getting Started Connecting external display devices Adjusting the Component Video Out Modes Your computer supports the following Component Video Out modes: ❖ 525p (480p, D2) ❖ 750p (720p, D4) ❖ 1125 (1080i, D3) ❖ 525i (480i, D1) Follow these steps to adjust the Component Video Out modes.
Page 75 Connecting external display devices Sample selecting Clone display mode Click the Primary display / Secondary display pull- down arrow and choose Digital Flat Panel/TV. Sample selecting digital flat panel/TV Click the TV icon to select the TV device. Click Device Settings/Select TV Format, then select 750p (720p, D4).
Page 76 Getting Started Connecting external display devices Most HDTVs currently on the market can handle this NOTE resolution. Further refinements of the Display Properties may be needed. Click Apply, then OK. Your system’s Component Video Out port is now activated. You can now toggle between the internal display and HDTV using the Fn+F5 hot key combination, or the TV Out button.
Page 77: Adjusting The Display Properties
Out button is located above and to the right of the keyboard.) If you do not see the image transfer from your computer screen NOTE to the external video device, modify the Display Properties as described in “Adjusting the Display Properties” on page 77. Adjusting the Display Properties When using the S-Video display port, the desktop shown on your TV may be larger than the screen can show.
Page 78: Directing The Display Output When You Turn On The Computer
Getting Started Connecting external display devices TECHNICAL NOTE: Most televisions use or support an 800 x 600 standard resolution. Click Apply, then click OK to close the Display Properties window. The screen is now displayed correctly on your TV. For more information, see you turn on the computer”...
Page 79: Adjusting The Quality Of The External Display
While holding down between each press, until the setting you want takes effect. This hot key cycles through the settings in the following order: ❖ Built-in display only ❖ Built-in display and external monitor simultaneously ❖ External monitor only ❖ Built-in display and TV (or other external video device) simultaneously ❖...
Page 80: Connecting External Av Input Devices
Getting Started Connecting External AV Input Devices settings. See the video device documentation for additional configuration steps. TECHNICAL NOTE: To use one of the simultaneous modes, you must set the resolution of the internal display panel to match the resolution of the external display device. The external display device must support a resolution of 640 X 480 or higher.
Page 81 Connecting External AV Input Devices Connecting to the S-video In port You can connect an external input device such as a VCR/ DVD player or game console to the S-video In port on the back of your computer. S-video cables are not included with your computer. To NOTE connect a device to the S-video In port, you will need to purchase an S-video cable.
Page 82: Powering Off The Computer
Getting Started Powering off the computer To connect the device: Connect one end of the video cable to the external video device. Refer to the documentation provided with the device for the location of its Video Out port. Connect the other end of the video cable to the S-video In port on the back of the computer.
Page 83: Caring For Your Computer
Never use harsh or caustic chemical products to clean the computer. To keep your computer clean, gently wipe the display panel and exterior case with a lightly dampened cloth. Ask your Toshiba dealer for suggestions for appropriate cleaning products. Caring for your computer ®...
Page 84: Closing The Display Panel
Although your notebook computer is built to withstand reasonable shock and vibration, transport it in a carrying case for long trips. You can purchase a carrying case from your Toshiba dealer, through the accessories information packaged with your system, or visit “Accessing TOSHIBA 245.
Page 85: Using A Computer Lock
Using a computer lock For your own peace of mind, you may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional PORT-Noteworthy Computer Lock Cable. Sample PORT-Noteworthy To secure the computer: Loop the cable through or around some part of a heavy object.
Page 86: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the hard disk. You will lose all unsaved work, if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 87 ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 88: Using The Keyboard
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 89: Ctrl, Fn, And Alt Keys
of the specially marked keys allows you to emulate a full-size keyboard. The emulation Fn key and the Wake up on Keyboard while in NOTE Stand By are only functional when using the internal keyboard; they are not supported when using a USB keyboard. Your computer’s keyboard has only one Most of the time, this does not matter.
Page 90: Windows® Special Keys
Learning the Basics Using the keyboard through programmed functions when pressed. Used in combination with the specific functions on the computer. For example, off the TouchPad. For more information, see page 233 ® Windows special keys Sample Windows Your computer’s keyboard has two keys that have special functions in Windows: ❖...
Page 91: Using The Overlay To Type Numeric Data
The keys with gray numbers and symbols on the front of them form the numeric and cursor overlay. This overlay lets you enter numeric data or control the cursor as you would using the 10-key keypad on a desktop computer’s keyboard. Using the overlay to type numeric data To turn the numeric overlay on, press simultaneously.
Page 92: Starting A Program
Learning the Basics Starting a program To use the numeric keypad overlay when the cursor control overlay is on, hold down overlay keys. To return to the cursor control overlay, release Shift To turn off the cursor control overlay, hold down the and press keyboard indicator panel goes out.
Page 93: Starting A Program From Windows Explorer
Point to the program group, in this example, Accessories. The Accessories menu displays. Click the program, in this example, WordPad. WordPad opens. To close the program, click the Close button in the upper-right corner of the program’s window. Starting a program from Windows If a program is not listed in the Programs menu, you can start it from Windows view of your computer’s contents as a hierarchy or “tree.”...
Page 94: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program In the left pane of the window, click Accessories. Windows folder on the right side of the window. In the right pane of the window, double-click WordPad.exe. WordPad opens. To close the program, click the Close button in the upper-right corner of the program’s window.
Page 95: Saving Your Work
HINT: To run the same program again, click the arrow to the right of the text box and select the command line from the drop-down list. Saving your work Before you turn off the computer, save your work to the hard disk drive.
Page 96: File Names
Learning the Basics Saving your work HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name. Sample Save As dialog box The Windows up to 255 characters;...
Page 97: Printing Your Work
Using a file extension Most programs assign an extension to the file name that identifies the file as being created in the program with a particular format. For example, Microsoft with a .doc extension. Any file name with an extension of “.doc”...
Page 98: Backing Up Your Files
Learning the Basics Backing up your files The program displays a Print dialog box. Sample Print dialog box Specify the print parameters. For example, the range of pages and number of copies to print. Click Print. Backing up your files Backing up your files means copying individual files to media, such as a writable CD, or copying entire sections of your hard disk to another device, such as a tape drive.
Page 99: Restoring Your Work
Double-click the folder that contains the file, then click the file you want to copy. HINT: You can use the Ctrl or Shift keys to select more than one file. Click File, then click Send To and select the drive from the list.
Page 100: Using The Dvd-Rom Or Multi-Function Drive
Learning the Basics Using the DVD-ROM or multi-function drive Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform.
Page 101: Drive Components And Control Buttons
Using the DVD-ROM or multi-function drive Drive components and control buttons The DVD-ROM or multi-function drive is located on the front of the computer. The Media control buttons are located above the keyboard and can be accessed when the display panel is open.
Page 102 Learning the Basics Using the DVD-ROM or multi-function drive The TV button: ❖ Launches Windows Media Center and activates the TV interface, when the computer is powered on and Windows is running. For more information, see “Watching Television Programs” on page ❖...
Page 103: Inserting A Disc
Using the DVD-ROM or multi-function drive Inserting a disc Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears. To turn the volume down, use the Volume Control switch or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control).
Page 104: Playing An Audio Cd
Learning the Basics Using the DVD-ROM or multi-function drive Playing an audio CD Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears. To turn the volume down, use the Volume Control switch or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control).
Page 105: Playing Cds Using Auto-Run
Using the DVD-ROM or multi-function drive Sample Windows Media The CD Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/pause button on the CD Player control panel. ❖...
Page 106: Creating A Cd Or Dvd
Learning the Basics Using the DVD-ROM or multi-function drive and point it to play the CD. For other types of media, use the associated software to open the files on the disk. Creating a CD or DVD Depending on your computer’s configuration, your computer may come with a multi-function drive that allows you to: ❖...
Page 107: Removing A Disc
Using the DVD-ROM or multi-function drive Removing a disc Never press the eject button or turn off the computer while the drive-in-use light is glowing. Doing so could damage the disk or the drive. The computer must be powered on to eject a disc. NOTE Locate and press the eject button.
Page 108: Powering Down The Computer
Learning the Basics Powering down the computer Powering down the computer Pushing the power button before shutting down the Windows operating system could cause you to lose your work. Make sure the system indicator panel’s disk light and the drive-in- use light are off.
Page 109 To use either of these methods, you first need to turn it on in Toshiba’s Power Saver utility. Open the Start menu, click Control Panel, then Performance and Maintenance. Click the Toshiba Power Saver icon. Click on the Setup Action tab. Select the following from the drop-down lists. ❖...
Page 110: Using Hibernation Mode
Learning the Basics Powering down the computer Click OK. Sample Toshiba Power Saver Properties dialog box For more information about the Power Saver utility, see NOTE “Power Management” on page Starting again after Turn off To start the computer up again, press the power button until the on/off light changes to blue.
Page 111 again, the computer runs a self-test, loads the operating system, and then returns to the mode in which you left it. Factors to consider when choosing Hibernation: ❖ While in Hibernation mode, the computer uses no battery power. ❖ Because the mode of the system is held on the hard disk, no data is lost if the main battery discharges.
Page 112 Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click to select a profile. Click the Setup Action tab. Select Hibernate for the options you want.
Page 113: Using Stand By Mode
Hibernation mode when you close the display panel. Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Once the computer is configured, place the computer into Hibernation mode by either pressing the power button or closing the display panel, depending on the hibernation options selected.
Page 114 Learning the Basics Powering down the computer ❖ When starting up again, the computer returns to the state in which you left it, and opens all the programs and files you were using. If you power down using the Stand By command and the battery discharges fully, your unsaved information will be lost.
Page 115 The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click to select a profile. Click the Setup Action tab. Select Stand By for the options you want.
Page 116: Toshiba's Online Resources
The computer returns to the screen you were previously using. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 117: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods of time...
Page 118: Running The Computer On Battery Power
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. current on the most recent software and hardware options for your computer, and for other product information.
Page 119: Power Management
For optimum DVD performance, Toshiba recommends that you NOTE play DVDs while running on AC power rather than on battery power. The QosmioPlayer is not a Windows-based application. Battery life is less than when using similar applications in the Windows Operating System.
Page 120: Using Additional Batteries
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 121: Charging The Main Battery
Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adapter to run applications, features, and devices, the recharging of the battery cannot occur.
Page 122 Mobile Computing Charging the batteries The RTC battery may have become completely discharged while your computer was shipped, resulting in the following error message during startup: BAD RTC BATTERY BAD CHECKSUM (CMOS) CHECK SYSTEM The above error message may vary by computer model. NOTE The RTC battery does not charge while the computer is turned off even when the AC adapter is charging the...
Page 123: Monitoring Battery Power
Monitoring battery power The computer’s main battery light gives you an indication of the main battery’s current charge: ❖ Blue means the battery is fully charged. ❖ Amber means the battery is charging (AC Adapter connected). ❖ Off (no illumination) indicates one of the following conditions: the battery is dead, the battery is not charging, the battery is not fully charged, or the AC adapter is not plugged in to the computer or AC outlet.
Page 124 The value displays as a percentage of remaining battery charge. Sample Toshiba Power Saver Properties Dialog Box The remaining battery charge is indicated on the top-left side of the dialog box.
Page 125: What To Do When The Battery Runs Low
TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 126: Conserving Battery Power
These power-saving options control the way in which the computer is configured. By using them, you can greatly increase the length of time you can use the computer before you need to recharge the battery. Toshiba has combined these options into preset power usage modes or profiles.
Page 127: Power Profiles
Toshiba Power Saver instead. Open the Start menu, click Control Panel, then Performance and Maintenance. Click on the Toshiba Power Saver icon. Select an appropriate profile for your work environment or create your own custom profile. For more information, see page 242.
Page 128: Changing The Main Battery
Mobile Computing Changing the main battery While continuing to press desired power profile. The power profile options are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Release the The pop-up window disappears. You are now in the selected mode.
Page 129: Removing The Battery From The Computer
Removing the battery from the computer When handling batteries, do not drop or knock them. Also, be careful not to damage the casing or short-circuit the terminals. Save your work. Turn off the computer. Remove all cables connected to the computer. Turn the computer over.
Page 130: Inserting A Charged Battery
Mobile Computing Changing the main battery Slide the battery release latch to the unlocked position while lifting up on the battery pack to remove the discharged battery out of the computer. Sample removing the discharged battery pack If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately following the advice in Inserting a charged battery...
Page 131 Sample inserting a new battery pack If the battery does not slide into the slot easily, move the battery release lock to the unlocked position and try again. Do not force the battery into position. Ensure the battery release latch clicks into place. Slide the battery release lock to the locked position.
Page 132: Taking Care Of Your Battery
❖ If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com.
Page 133: Maximizing Battery Life
❖ A reverse polarity condition should be avoided with all batteries. The main battery is designed so that it cannot be installed in reverse polarity. ❖ Charge the battery only in the computer or in a battery charger designated as an approved option. ❖...
Page 134: Disposing Of Used Batteries
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. After repeated use, the batteries will finally lose their ability to hold a charge and you will need to replace them. Under federal, state, and local laws, it may be illegal to dispose of old batteries by placing them in the trash.
Page 135: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cables, and compact discs. Contact your authorized Toshiba representative for more information.
Page 136: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in ® the Windows system. You use its features to start programs, find documents, set up system components, and perform most other computing tasks.
Page 137: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, taskbar, system tray, and background pattern. Icons Taskbar Start button System tray ® Sample Windows XP Media Center Edition operating system desktop Icons An icon represents a folder, file, or program that can be...
Page 138 Exploring Your Computer’s Features Exploring the desktop The icons initially displayed on your system desktop include: Recycle Bin—Holds files you have deleted. You may be able to retrieve these files until you empty the Recycle Bin. TECHNICAL NOTE: If you delete a file from a diskette, it does not go into the Recycle Bin.
Page 139: System Tray
Exploring Your Computer’s Features Taskbar Each time you open a program, a button associated with that program appears on the taskbar. With some programs, a button appears on the taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 140: Setting Up For Communications
To stay current on the most recent software and hardware NOTE options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com. Determining the COM port Your modem is connected to one of the computer’s COM (communications) ports.
Page 141 Exploring Your Computer’s Features To find out which port your modem is connected to: Open the Start menu, and click Control Panel. Click Printers and Other Hardware. Click Phone and Modem Options. The Phone and Modem Options Properties dialog box displays.
Page 142: Connecting The Modem To A Telephone Line
Exploring Your Computer’s Features Setting up for communications Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 143: Connecting To A Network
Now you are ready to send a fax or use the modem to connect to an online service or the Internet. For more information on using a modem, see communications” on page Connecting to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports.
Page 144 Windows to disable the LAN port. TECHNICAL NOTE: You can also use ConfigFree to reconfigure Windows to disable the LAN port. For procedures, “Using ConfigFree™ with your Toshiba Computer” on page To disable the LAN port: Click Start, click Control Panel, then Performance and Maintenance.
Page 145 Your computer may have an integrated Wi-Fi Wireless LAN Mini PCI module. It is recommended that you do not remove the module from your computer. For assistance, contact a Toshiba Wireless Authorized Service Provider. Exploring Your Computer’s Features Setting up for communications ®...
Page 146 Exploring Your Computer’s Features Setting up for communications For systems equipped with Wi-Fi, slide the wireless on/off switch to the On position. You can use Wi-Fi NOTE To enable a wireless device, use the “Enabling a wireless device” on page 317 information).
Page 147: An Overview Of Using The Internet
An overview of using the Internet The following sections give a quick introduction to the Internet and some of its exciting features. ❖ The Internet ❖ The World Wide Web ❖ Internet Service Providers ❖ Connecting to the Internet ❖ Surfing the Internet ❖...
Page 148: Connecting To The Internet
Exploring Your Computer’s Features An overview of using the Internet is a company that has the equipment and the telecommunication lines necessary to maintain an Internet connection. You can connect to the Internet by using a telephone and modem or through other higher-speed communication methods such as Digital Subscriber Lines (DSL), cable, and satellite links.
Page 149: Surfing The Internet
Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type the Web address. The Web address, or Uniform Resource Locator (URL), is a unique identifier for that computer system linked to the Internet.
Page 150: Uploading To, And Downloading Files From, The Internet
Exploring Your Computer’s Features Exploring audio features ❖ Online shopping Many Web sites offer products and services for sale. Uploading to, and downloading files from, the Internet Transferring files from one computer to another is termed uploading (transferring data from your computer to a site on the Web), or downloading (transferring data from a site on the Web to your computer).
Page 151: Using A Microphone
DEFINITION: A .wav (pronounced “wave”) file is a Windows format for storing sound. TECHNICAL NOTE: If you record MP3 files, you can only play them on a device capable of playing MP3 files. Using a microphone To record high-quality sounds, you can use the internal microphone or attach an external microphone: If you are using the internal microphone, which is located below the keyboard in the left side of the palm rest, go to...
Page 152 Exploring Your Computer’s Features Exploring audio features Positioning Sample Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform.
Page 153: Using External Speakers Or Headphones
Using external speakers or headphones Your computer is equipped with a full stereo sound system with internal speakers. Instead of using the internal speakers, you can connect headphones or a pair of external stereo speakers. SP/DIF and headphone jack This jack lets you connect either an optical digital audio-out cable (optional) directly to your digital stereo receiver port or a stereo headphone (16 Ohm minimum).
Page 154: Using The I.link® Port
Exploring Your Computer’s Features Using the i.LINK Using the i.LINK The i.LINK an extremely fast data transfer rate. In addition to high speed, the i.LINK isochronous data (the delivery of data at a guaranteed rate.) This makes it ideal for devices that transfer high levels of data in real-time, such as video devices.
Page 155: Removing A Pc Card
To insert a PC Card: Turn off the computer. You may also hot swap a PC Card. Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray. After the PC Card is stopped, it is safe to remove. Locate the PC Card slot on the right side of the computer.
Page 156: Setting Up A Pc Card For Your Computer
Exploring Your Computer’s Features Inserting an ExpressCard™ Sample ejecting a PC card The PC Card ejects slightly from the slot. Grasp the edges of the PC Card and slide it out of the slot. Setting up a PC Card for your computer Some PC Cards are ready to use as soon as you install them.
Page 157: Removing An Expresscard
To insert an ExpressCard: Turn off the computer. You may also hot swap an ExpressCard. Stop the ExpressCard by clicking the Safely Remove Hardware icon on the System tray. After the ExpressCard is stopped, it is safe to remove. Locate the ExpressCard slot just above the PC Card slot on the right side of the computer.
Page 158: Inserting Media
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Inserting media The following instructions apply to all media devices. Turn the media so that the contacts (metal areas) are face down. Push the media into the adapter slot until it locks in place. Sample inserting media When inserting memory media, do not touch the metal contacts.
Page 159: Using Qosmioplayer
Using QosmioPlayer Your computer includes the QosmioPlayer software, allowing you to watch television (if the computer is connected to a television or video source), play audio CDs, or watch DVD- video without having to launch the operating system. When using QosmioPlayer, some MCE Remote Control NOTE options will not function.
Page 160: Using The Media Control Buttons
Exploring Your Computer’s Features Using QosmioPlayer Using the Media Control Buttons The Media Control buttons above the computer keyboard allow you to reverse to the previous song, skip to the next song, play or pause the CD, or stop the CD. Play/ Pause Sample CD Player Media Control buttons...
Page 161: Playing A Dvd
When playing a supported audio CD, you also have the following keyboard options: Press a number on your keyboard to play a specific track on the Press this key to hide the audio CD option guide. Press again to re-display the guide. CTRL + S Press the CTRL+S keys to shuffle the CD currently playing.
Page 162 Exploring Your Computer’s Features Using QosmioPlayer The Media Control buttons above the computer keyboard allow you to move to the previous chapter or next chapter, play or pause the movie, or stop the DVD. The following options must be supported by the DVD you are NOTE playing or they will not be available for use.
Page 163: Watching Television
Duplicated DVD discs may not play with QosmioPlayer. In NOTE addition, if any of the media are scratched or dirty, or not in compliance with standards, they may not play properly. In these cases, power on your computer and use the WinDVD™ software to play DVDs.
Page 164: Connecting An External Device
Exploring Your Computer’s Features Using QosmioPlayer Sample Setup menu When viewing television programs, you have the following options: Press a number on your keyboard to watch a specific channel. PAGE UP/ Press the PAGE UP key to scroll backward through channels, DOWN press the PAGE DOWN key to scroll forward through channels.
Page 165: Toshiba Qosmio Remote Control
Windows or the QosmioPlayer. Toshiba Qosmio Remote Control You can use your Toshiba Qosmio Remote Control to play CDs, DVDs, and videos; to view pictures; and to watch television programs through QosmioPlayer. The remote control helps you navigate the QosmioPlayer...
Page 166 Exploring Your Computer’s Features Using QosmioPlayer Remote Control Buttons Overview Stop Record Rewind Replay Back Arrows Volume Control Recorded Guide Sample Remote Control Power Pause Play Forward Skip More OK Button Start Channel/ Page Control Mute DVD Menu Live TV...
Page 167 Exploring Your Computer’s Features The remote control has the following buttons/functions depending on which mode you are using: Button TV Mode Power Turns the computer’s power on and off Play None Pause None Stop None Record Displays the message, “This function is not supported”...
Page 168 Exploring Your Computer’s Features Using QosmioPlayer Button Down Moves the cursor down one selection within QosmioPlayer menu Left Moves the cursor left one selection within QosmioPlayer menu Right Moves the cursor right one selection within QosmioPlayer menu Accepts the current selection within QosmioPlayer menu Start...
Page 169: Hibernation Mode
None Displays the Menu QosmioPlayer menu Using the Toshiba Qosmio Remote Control To begin using your remote control: Point the remote control at the remote sensor. The remote sensor is located on the front of your computer. Make sure there is nothing blocking the path between your remote control and the remote sensor.
Page 170: Installing The Qosmioplayer Recovery Media
Exploring Your Computer’s Features Installing the QosmioPlayer Recovery media QosmioPlayer Setup menu. Then use the arrow keys to select the desired options and press OK to accept them. The Setup menu is important when configuring television for the first time, because you can use it to scan the available channels.
Page 171: Chapter 5: Getting To Know The Windows Xp Media Center Edition 2005
Chapter 5 Getting to Know the Windows Center Edition 2005 This section introduces you to the Windows Center Edition 2005, a complete multimedia center where you can play your entire library of audio, video, and picture media on your computer, using either your computer’s keyboard, mouse, or the remote control.
Page 172: Media Center Setup
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup Media Center Setup This section shows you how to set up your computer to use the Media Center. There are many different methods you can use to connect your television and computer which are covered in the following sections.
Page 173 Getting to Know the Windows ® XP Media Center Edition 2005 Some stations may not come in clearly if the signal is not NOTE strong enough. If you do not have a Set-top box, you may need to purchase a signal amplifier which may help boost and improve the cable signal.
Page 174: Connecting The Tv Signal Source When You Have An Existing Setup
Getting to Know the Windows ® XP Media Center Edition 2005 Media Center Setup Connecting the TV Signal Source When You Have an Existing Setup This section describes how to connect the signal source from the wall to a VCR/DVD player to a TV using two coaxial cables (not shipped with your computer or system).
Page 175: Connecting The External Remote Sensor
Getting to Know the Windows ® XP Media Center Edition 2005 ❖ For those VCR/DVD players or Set-top boxes that support S-video out, connect an S-video cable from the VCR/DVD player or Set-top box to the S-video in port on the back of the computer.
Page 176: Starting The Media Center
Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center Connect the IR receiver cable USB connector to an available USB port on your computer. Connect the IR remote sensor cable (small 3.5 mm) connector to one of the ports on the IR receiver. Sample IR receiver with cables attached Position the end of the IR receiver cable over the remote IR receiver window on your cable TV Set-top box or...
Page 177 Getting to Know the Windows ® XP Media Center Edition 2005 The first time you open Media Center, the program displays a NOTE setup wizard. You will use the wizard to test your remote control and configure your Internet connection, TV signal, Television Program Guide, and speakers.
Page 178 Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center Sample Media Center Setup Wizard: Welcome screen Click Next. The wizard displays the Media Center Setup screen. Click Next. The wizard displays the Media Center Privacy Policy screen.
Page 179 Getting to Know the Windows ® XP Media Center Edition 2005 Click Test to verify that your computer is connected to the Internet. ❖ If the connection is not working, the wizard displays an error message. Recheck both ends of your connection and click Test.
Page 180 Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center When you set up the TV Signal and identify the Set-top box NOTE remote, you may receive a “Remote Not Recognized” message. When this occurs, you must select the Have Media Cen- ter Learn My Remote Again From Scratch option.
Page 181 Getting to Know the Windows ® XP Media Center Edition 2005 Use the numeric keys on your keyboard to enter your ZIP code, then click Next. The wizard displays the Download Provider Information screen. The Media Center connects to the internet and begins to download information about your local TV provider.
Page 182 Getting to Know the Windows ® XP Media Center Edition 2005 Starting the Media Center Click Keep my current settings and continue, then click Next. The wizard displays the Adjust Your Display Settings screen. Click Finish this wizard, then click Next. The wizard displays the You Are Done! screen.
Page 183: Using Media Center
Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center You can run Media Center side by side with other Windows NOTE software programs. It is possible to browse through your pictures, watch videos, play music, and even record TV while using other Windows programs.
Page 184 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center ❖ Watch a DVD movie ❖ Change your Media Center Settings When enjoying the Media Center, use the icons on the Title Bar to return to the Media Center main screen, go back to the previous screen, or to display the Media Center’s online help.
Page 185 OK. Using the Toshiba Qosmio Remote Control with Media Center You can use your remote control with Media Center to play CDs, DVDs, and videos;...
Page 186 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Remote Control Buttons Overview Stop Record Rewind Replay Back Arrows Volume Control Recorded Guide Sample Remote Control Power Pause Play Forward Skip More OK Button Start Channel/ Page Control Mute...
Page 187 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center The remote control has the following buttons/functions: Power — Turns the computer on and starts Windows if the computer is off or in Hibernation mode. If the computer is running Windows or Media Center, pressing Power turns off the computer.
Page 188 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center OK — Selects the desired action or window option. It acts like the Enter back to the previously viewed channel. Press again to toggle back. OK acts the same way as a Jump button on some TV remote controls.
Page 189 Getting to Know the Windows ® XP Media Center Edition 2005 Direct Access Buttons The direct access buttons place Media Center in Recorded TV, live TV, TV program guide, or the DVD menu mode. ❖ Recorded TV launches Media Center into Recorded TV mode when the computer is powered off or in Hibernation mode.
Page 190 Getting to Know the Windows ® XP Media Center Edition 2005 Using Media Center Use Forward to move selected video or picture media forward. Press Forward up to three times to increase the fast forwarding speed. Pressing the Forward button: ❖...
Page 191 Getting to Know the Windows ® XP Media Center Edition 2005 Use Next to move forward in the selected audio or video file. ❖ For music, Next moves to the next track. ❖ For DVDs, Next moves to the next chapter. ❖...
Page 192: Watching Television Programs
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs Watching Television Programs Before you can watch TV using Media Center, make sure your NOTE computer is set up correctly for your TV signal source and that you have completed the Media Center setup wizard.
Page 193: Selecting A Program From The Tv Guide
Getting to Know the Windows ® XP Media Center Edition 2005 ❖ Record a single TV show or an entire series (my TV will manage the recordings for you and give advanced warning if there are any recording conflicts) ❖ Create a recorded TV library ❖...
Page 194 Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs Use the arrows on the remote to scroll through the list of current television programs and channels available from your television service provider. The TV Guide displays the channel and network, as well as the show title and scheduled time block.
Page 195: Watching A Recorded Tv Program
Getting to Know the Windows ® XP Media Center Edition 2005 Watching a Recorded TV Program Recorded TV is the storage place for all your recorded programs. In the Recorded TV window, you can sort your shows by name, date, or status. You can also delete a recorded program or series of programs and check for any recording errors.
Page 196: Searching For A Tv Program To Watch
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Television Programs Select Scheduled to view a list of all programs scheduled to be recorded. Use the Sort by Date and Title options to sort the scheduled programs, if needed. Use the arrow buttons to move through the list, select a program, and then press OK on the remote control.
Page 197: Recording Tv
Getting to Know the Windows ® XP Media Center Edition 2005 ❖ Select Keyword. Use the keys on your keyboard to enter a descriptive word that would appear in a program title or program description, and then press OK on the remote control.
Page 198 Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV Sample My TV screen with recorded notation If a show is currently being recorded, the Record icon also appears in the taskbar on the desktop. If you move your mouse over the icon, the Media Center displays which show is currently being recorded.
Page 199: Recording Tv Tips
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV tips ❖ If you are watching live TV during a scheduled recording time, you can watch only the show being recorded. If you change channels, the recording stops. ❖...
Page 200: Recording From The Guide
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV Recording from the Guide To record a current or future show or series from the Guide: Press the Start button on the remote control to start the Media Center and to open the Media Center main window.
Page 201: Recording Manually
Getting to Know the Windows ® XP Media Center Edition 2005 Use the arrow buttons to scroll through the search results to select the show you want to record, select the show, and then press OK. Select Record or Record Series in the window, and then press OK.
Page 202: Changing Your Settings
Getting to Know the Windows ® XP Media Center Edition 2005 Recording TV Under the Create a custom recording with area, select Channel and Time. If the channel is incorrect, enter the correct channel with the numeric keys on your keyboard. Use the arrow buttons on the remote and +/- buttons on the screen to select the correct settings.
Page 203: Changing Recording Priorities
Getting to Know the Windows ® XP Media Center Edition 2005 Changing recording priorities If Media Center encounters a recording conflict between two series, then Media Center uses the series priorities list to decide which show to record. You can place the series you most want recorded high on the series priorities list to help ensure it is successfully recorded in the case of conflicts.
Page 204: Listening To Music
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Listening to Music The My Music window in the Media Center works with Windows Media CDs. You can use Windows Media Player to create your music library and then use Media Center to find and play your music using your remote control.
Page 205: Adding Music From Your Hard Drive To Windows Media Player Library
Getting to Know the Windows ® XP Media Center Edition 2005 Click the Library tab at the top of the window. The first time you select the media Library, a message tells you that Windows Media Player needs to search your computer for your music files.
Page 206 Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music You may have already copied and organized your music files on your hard drive. If so, you need to add them to the Windows Media Player Library to access them with the Media Center.
Page 207: Playing Digital Music Files
Getting to Know the Windows ® XP Media Center Edition 2005 Your music files can now be found and played in the My Music window in the Media Center. You may need to close and open Media Center for the added music files to appear in My Music.
Page 208: Finding Music Files In My Music
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Media Center asks you if you want to play the CD. Select Yes to begin playing the CD. Media Center cannot be used to record music files. Use NOTE Windows Media Player to record music files.
Page 209: Playing A Song
Getting to Know the Windows ® XP Media Center Edition 2005 Use the arrow keys to select a music file, press OK on the remote, and then press Play on the remote control to begin playing that music file. If you back up music files from a CD using Windows Media NOTE Player, you must log the files into the Media Player’s play list before you can play them using the Media Center.
Page 210: Setting Up An Automatic Disc Jockey
Getting to Know the Windows ® XP Media Center Edition 2005 Listening to Music Setting Up an Automatic Disc Jockey You can select to have Media Center randomly play all the available songs in one genre: Press the Start button on the remote control to start the Media Center and to open the Media Center main window Select My Music.
Page 211: Creating A Playlist
Getting to Know the Windows ® XP Media Center Edition 2005 ❖ Repeat (play the album again) ❖ Play (play the selected album) When you select Play, the Now Playing window opens, and the album starts playing. ❖ Buy Music (connect to the Internet, find CD information, and buy music CDs) To go back to Media Center, press Start on the remote control.
Page 212: Displaying Your Pictures
Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures Left click the Now Playing list menu on the right side of the screen. Select New List, then Playlist. Drag the music files to the right side of the Media Player window.
Page 213 Getting to Know the Windows ® XP Media Center Edition 2005 In My Pictures, you can: ❖ View pictures individually or as a slide show ❖ Change transition time and display order of the pictures in your slide show ❖ Sort pictures by name or date ❖...
Page 214: Viewing A Slide Show
Getting to Know the Windows ® XP Media Center Edition 2005 Displaying Your Pictures Use the arrow buttons on the remote control to move through your picture files and folder files and select a picture. Press OK to select a picture or folder to view. The selected picture opens in full screen mode.
Page 215: Watching Your Digital Movies
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies The My Videos window in the Media Center makes it easy to play home video files you created or video files you downloaded from the Internet. Sample Media Center main screen In My Videos you can: ❖...
Page 216: Playing Digital Videos
Getting to Know the Windows ® XP Media Center Edition 2005 Watching Your Digital Movies If not, move your videos into the My Videos or Shared Videos folder in Windows Explorer for Media Center to be able to find and play them. Once you have placed all your videos into the My Videos or Shared Videos folder, you can rename, add, delete, and organize them into folders.
Page 217: Playing A Video In Full Screen Mode
Getting to Know the Windows ® XP Media Center Edition 2005 Press the OK button on the remote control. The selected video plays in full screen mode, or the folder opens displaying a list of video files. Use the mouse to resize the window if you want to watch your video while doing something else on your desktop.
Page 218: Watching A Dvd
Getting to Know the Windows ® XP Media Center Edition 2005 Watching a DVD Watching a DVD Watching DVDs in the Media Center allows you to control the playback with your remote control. If you select to play your DVD in another program, the use of some of the remote control buttons is not supported.
Page 219: Stopping A Dvd Movie
Getting to Know the Windows ® XP Media Center Edition 2005 Stopping a DVD Movie Press the Stop button on the remote control to stop the movie. Use the arrow buttons on the remote control to select an item on the Stopped menu, and then press OK. ❖...
Page 220: Changing The Media Center Settings
Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Changing the Media Center Settings In the Media Center Settings window, you can change settings for watching television, for viewing your pictures and slide shows, and for controlling sound and the display of all the Media Center windows.
Page 221 Getting to Know the Windows ® XP Media Center Edition 2005 Select General. The General Settings screen includes the following options: ❖ Select Startup and Window Behavior to change Media Centers startup and window behavior, for example, you can elect to start Media Center when Windows starts. ❖...
Page 222 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Changing TV Recorder Settings The TV Recorder settings allow you to control your recording priorities and options in Media Center. Press the Start button on the remote control to start the Media Center and to open the Media Center main window.
Page 223 Getting to Know the Windows ® XP Media Center Edition 2005 About Recorded TV Storage Space Settings The space available for recording TV programs depends on your hard disk allocation, drive size, and default recording quality selections. Your computer requires a certain amount of space to run your Windows XP operating system, run software programs, and store data files.
Page 224 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Change TV Guide Settings In the Guide Settings, you can select which channels to display and you can manually update your Guide from the Internet.
Page 225 Getting to Know the Windows ® XP Media Center Edition 2005 Use the arrow buttons to select an option, and then press OK on the remote control. Make required changes, if any. Press the Back button on the remote control to return to the TV Settings window.
Page 226 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Use the arrow buttons to select Turn on movie blocking, and then press OK. Use the arrow buttons to select Block unrated movies, and then press OK. Use the arrow buttons to select the + or - area.
Page 227 Getting to Know the Windows ® XP Media Center Edition 2005 Selecting Close Captioning The audio settings window allows you to select closed captioning. Close captioning displays the TV’s spoken audio in text format for those who are unable to hear the audio. To select close captioning: Press the Start button on the remote control to start the Media Center and to open the Media Center main...
Page 228 Getting to Know the Windows ® XP Media Center Edition 2005 Changing the Media Center Settings Changing Picture Settings Each user can set his or her own picture settings. Press the Start button on the remote control to start the Media Center and to open the Media Center main window.
Page 229: More Programs
Getting to Know the Windows ® XP Media Center Edition 2005 More Programs Sample Media Center main screen Use the options on the More Programs screen, available from the Media Center’s main menu, to perform the following tasks: ❖ Select Create CD/DVD to create a CD or DVD. ❖...
Page 230: Online Spotlight
Getting to Know the Windows ® XP Media Center Edition 2005 Online Spotlight Sample More Programs main screen Online Spotlight Use the Online Spotlight screen, available from Media Center’s main screen, to purchase and download music, DVDs, and movies, and read news and sports stories. Tips on Media Center are also available for viewing from this screen.
Page 231: Getting Help For Media Center
Getting to Know the Windows ® XP Media Center Edition 2005 Getting Help for Media Center Getting Help for Media Center Click the Help icon at the top left of the screen to access Media Center’s Help screen, which includes a number of links to helpful information on Media Center, as well as help for hardware problems.
Page 232: Chapter 6: Toshiba Utilities
Your computer includes several utilities designed to help you to reconfigure your system to best meet your individual needs. Together, these allow you to determine certain system details, set additional options, or change default options. This chapter describes the utilities supplied by Toshiba: ❖ Fn-esse® ❖...
Page 233: Fn-Esse
You can assign any key that is not associated with a hot key or a keyboard overlay. ® Starting Fn-esse Click Start, point to All Programs, Toshiba, then Utilities, then click Fn-esse. The Fn-esse keyboard appears. Sample Fn-esse screen Toshiba Utilities ®...
Page 234 Toshiba Utilities Fn-esse The keys are color-coded as follows: ❖ Available keys are dark gray with white letters. ❖ Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. ❖ Unavailable keys are light gray.
Page 235: Using The Keyboard Or Pointing Device To Assign Keys
The Assignment Type dialog box appears. Sample Fn-esse assignment type dialog box Follow the instructions in the assignment” on page 236 on page 236. Toshiba Utilities Fn-esse “Making a direct key “Making a popup assignment” ® key, then press...
Page 236: Viewing Existing Key Assignments
Toshiba Utilities Fn-esse Making a direct key assignment To make a direct key assignment, select Direct to display the Add/Edit Command dialog box, then complete these steps: Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click the Browse button to specify this information.
Page 237: Changing Or Removing Existing Key Assignments
Stand By ] and Hibernation [ Fn+F3 To activate: Click Start, All Programs, Toshiba, Utilities, then click the Hotkey utility. The Toshiba Hotkey window appears. Sample Toshiba Hotkey utility window Put a check mark next to the desired option.
Page 238: Toshiba Assist
Toshiba Utilities TOSHIBA Assist TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access this utility: Click Start, All Programs, Toshiba, Utilities, then click Assist. The TOSHIBA Assist window appears.
Page 239: Connect
The options in this category are: ❖ Supervisor password (see page 251) ❖ User password (see Sample TOSHIBA Assist window, Secure tab Toshiba Utilities TOSHIBA Assist “Using ConfigFree™ with your Toshiba 320) “Using the optional Bluetooth™ 146) “Setting passwords” on “Setting passwords”...
Page 240: Protect & Fix
Toshiba Utilities TOSHIBA Assist Protect & Fix The option available in this category is the Tool. Sample TOSHIBA Assist window, Protect & Fix tab Optimize ❖ Hotkey Utility ❖ Power Management ❖ SD Memory Card Format ❖ Mouse Utility ❖...
Page 241: Sd Memory Card Format
Toshiba Utilities SD Memory Card Format Sample TOSHIBA Assist window, Optimize tab SD Memory Card Format This utility is used to format SD cards used with the Bridge Media Adapter Slot. Sample SD Memory Card Format screen...
Page 242: Pc Diagnostic Tool
This utility can help diagnose problems with devices in your computer. Refer to the online help documentation within the application for any additional help. To start the utility, click Start, All Programs, Toshiba, Utilities, and click PC Diagnostic Tool. Sample PC Diagnostic Tool screen...
Page 243: Power Usage Profiles
The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties screen The Profile panel on the left of the TOSHIBA Power Saver Properties screen shows the power usage for both AC power and battery power. You can either use one of the preset profiles or create and use your own customized mode.
Page 244: Quickly Creating A New Power Mode
Make the desired changes to settings on the Basic Setup page and the Setup Action page. Click Apply. Click OK. Mouse Utility The Mouse utility allows you to change your TouchPad or mouse settings. To access the Mouse utility through the TOSHIBA Assist, click the Mouse icon.
Page 245: Accessing Toshiba Hw Setup
Accessing TOSHIBA HW Setup TOSHIBA HW Setup is the Toshiba configuration management tool. To access it, press the TOSHIBA Assist button above the left side of the keyboard. The TOSHIBA Assist screen appears. Click Optimize and double-click on the HW Setup icon to open the HW Setup dialog box.
Page 246: Toshiba Zooming Utility
All applications with icons on the desktop ❖ Microsoft Windows select one or more of these programs) To access the utility, click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Zooming Utility. The TOSHIBA Zooming Utility screen appears. function key and access the ®...
Page 247: Toshiba Picture Enhancement Utility
Toshiba Utilities Toshiba Picture Enhancement Utility Sample TOSHIBA Zooming Utility screen For more information about how to use the TOSHIBA Zooming Utility, right click on the icon in the taskbar and click on Help. Toshiba Picture Enhancement Utility The Toshiba Picture Enhancement utility allows you to adjust your computer screen to maximize the ambient surrounding light.
Page 248 Toshiba Utilities Toshiba Picture Enhancement Utility Sample Toshiba Picture Enhancement Utility Clicking the Monitor Input Settings button displays a screen for selecting external input settings for devices such as video cameras and games. Sample Monitor Input Settings screen...
Page 249: Cd/Dvd Drive Acoustic Silencer
CD/DVD Drive Acoustic Silencer Sample CD/DVD Drive Acoustic Silencer screen This utility, available on Toshiba Assist, can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more enjoyable.
Page 250: Toshiba Accessibility
TOSHIBA Accessibility The Toshiba Accessibility window The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Page 251: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password—Secures your open programs and files when leaving the computer temporarily (the user password supports this function).
Page 252: Using An Instant Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 253 Click Set. Click OK. Deleting a supervisor password To cancel the power-on password function: Click the TOSHIBA Assist icon on the desktop. On the left side, select Secure. Select the Supervisor Password icon. Select Verify by Password. Select the Supervisor Password tab.
Page 254 Make sure you use a password you can remember easily. If you forget the User and Supervisor passwords, you will not be able to use the computer. Contact a TOSHIBA Authorized Service Provider for assistance. To register a password for the power-on password functions: Click the TOSHIBA Assist icon on the desktop.
Page 255 Disabling a user password To cancel the power-on password function: Click the TOSHIBA Assist icon on the desktop. On the left side, select Secure. Select the User Password icon. Select Verify by Password. Type the correct password. Click Delete. Click OK.
Page 256: Chapter 7: Using The Raid-0 Or Raid-1 Utility
Chapter 7 Using the RAID-0 or RAID-1 Utility Using RAID RAID (Redundant Array of Independent Disks) is a utility that allows you to configure your computer to provide either improved performance in reading and writing data on the computer’s internal hard disks or greater reliability in storing data on the computer’s internal hard disks.
Page 257: Raid-0
Using the RAID-0 or RAID-1 Utility Using RAID RAID-0 RAID-0 provides improved performance in writing data to or reading data from your computer’s internal hard disks. RAID-0 is configured by creating an array which specifies the hard disks which striped data will be written to or read from.
Page 258: Raid-1
Using the RAID-0 or RAID-1 Utility Using RAID RAID-1 RAID-1 improves reliability in storing data by automatically copying all data from your computer’s primary internal hard disk to your computer’s secondary internal hard disk. If your computer’s primary hard disk fails, you can replace the failed primary hard disk with the secondary hard disk that contains the mirrored data.
Page 259: When You First Start Your Computer
When configuring the secondary hard disk for RAID-1 support, all existing data on the secondary hard disk will be permanently erased and will not be recoverable. Toshiba is not responsible for any loss of data on the hard disk. Your computer can only be configured for one type of RAID at NOTE a time.
Page 260 Using the RAID-0 or RAID-1 Utility Using RAID Sample New HDD detected window To create a RAID-1 array, click Enable RAID. The Confirm disk mirroring window appears. Sample Confirm disk mirroring window Click OK. The computer begins creating the array by copying data from the primary internal hard disk to the secondary internal hard disk.
Page 261: Creating A New Raid-0 Array
When a RAID-0 array is created, all data on both your primary and secondary hard disks is erased and cannot be recovered. Toshiba is not responsible for any loss of data on your hard disks. Your computer can only be configured for one type of RAID at NOTE a time.
Page 262 When a RAID-0 array is created, all data on both your primary and secondary hard disks is erased and cannot be recovered. Toshiba is not responsible for any loss of data on your hard disks.
Page 263: Toshiba Raid Console Utility
NOTE complete. TOSHIBA RAID Console Utility The TOSHIBA RAID Console utility provides a way to view and manage the RAID configuration on your computer and to check the status of the RAID array and physical drives. It also allows you to: ❖...
Page 264 Using the RAID-0 or RAID-1 Utility TOSHIBA RAID Console Utility Sample TOSHIBA RAID Console Utility with no RAID configured An icon is shown for each RAID-1 array configured on the computer. On each array icon, an icon is displayed for each physical drive belonging to the array.
Page 265 Using the RAID-0 or RAID-1 Utility TOSHIBA RAID Console Utility Sample TOSHIBA RAID Console Utility with RAID-0 configured RAID-1 When RAID-1 (mirroring) is configured, a single array icon and two physical drive icons are shown to represent the array and the physical drives associated with the array. The equal sign indicates that the data is mirrored (copied) from the internal hard disk to the secondary internal hard disk.
Page 266: Defining Options For Raid-0 Or Raid-1
MBR protection, see page 9. For more information on S.M.A.R.T., see page 10. To define options for RAID: Start the TOSHIBA RAID Console utility by clicking Start, All Programs. Then select TOSHIBA, RAID, RAID Console. Click Options.
Page 267 ❖ Alert configuration—Specifies whether RAID event messages are written to an event log (within the TOSHIBA RAID Console utility) or displayed on your computer’s screen. ❖ Array configuration—Allows you to enable or disable a write cache, MBR protection, and S.M.A.R.T.
Page 268 Contact a Toshiba Authorized Service Provider or Toshiba Global Support Centre for assistance. Within the United States call (800) 457-7777. Outside of the United States call (949) 859-4273.
Page 269: Viewing The Status Of An Array
S.M.A.R.T. To avoid loss of data, it is recommended that the hard drive be replaced immediately after receipt of a S.M.A.R.T. warning. You can view the status of a hard disk drive on the TOSHIBA NOTE RAID Console. See page 271 Make the appropriate selections.
Page 270 Using the RAID-0 or RAID-1 Utility TOSHIBA RAID Console Utility Sample Array information window ❖ Array No. Identification number of array. ❖ Status—Indicates the status of the array. The contents which will be displayed are as follows: ❖ ❖ ❖...
Page 271: Viewing The Status Of A Hard Disk Drive
Viewing the status of a hard disk drive To view the status of a hard disk drive: Start the TOSHIBA RAID Console utility by clicking Start, All Programs. Then select TOSHIBA, RAID, RAID Console. Double-click the hard disk icon.
Page 272 Using the RAID-0 or RAID-1 Utility TOSHIBA RAID Console Utility Sample hard disk drive information window ❖ Status—Displays the status of the physical drive. ❖ ❖ ❖ ❖ ❖ ❖ ❖ Capacity—Displays the drive capacity in gigabytes. ❖ Model number—Displays the drive model number.
Page 273: Performing A Media Check On A Raid-1 Array
If the computer is performing a media check and the computer is restarted, the media check will resume when the computer is restarted. By default the TOSHIBA RAID Utility is set up to perform a NOTE media check on the 3rd Wednesday of each month at 12:00 noon.
Page 274: Breaking A Raid-0 Array (Striping)
When a RAID-0 array is broken, all data on both your primary and secondary hard disks is erased and cannot be recovered. Toshiba is not responsible for any loss of data on your hard disks. To break the RAID-0 array: Plug in the AC adapter and power on the computer.
Page 275 WARNING: IF ONE HARD DISK FAILS, ALL DATA IS LOST. Enter selection:" Sample Toshiba Recovery DVD RAID Menu Press 1 and then press Enter to break the RAID-0 array. Using the RAID-0 or RAID-1 Utility TOSHIBA RAID Console Utility...
Page 276: Breaking A Raid-1 Array (Mirror)
(mirror). When you break the RAID-1 array, all data is permanently erased from the secondary internal hard disk. To break the RAID-1 array: Click Start, All Programs. Then, select TOSHIBA, RAID, RAID Console. The TOSHIBA RAID Console is displayed. Click Disable RAID.
Page 277: Rebuilding The Data On The Secondary Disk In A Raid-1 Array
When rebuilding the RAID-1 array, all existing data on the secondary hard disk will be permanently erased and cannot be recovered. Toshiba is not responsible for any loss of data on the hard disk. If a hard disk password has previously been assigned, the NOTE password entry window will display.
Page 278 It may take several minutes or up to one hour to rebuild the array depending on the amount of data to be copied. The progress of the rebuilding process can be viewed on the TOSHIBA RAID Console window.
Page 279: Restoring A Failed Drive In A Raid-1 Array
Contact Toshiba Global Support Centre or a Toshiba Authorized Service Provider for assistance. Removing the failed primary hard disk and replacing it with the seconary hard disk improperly could damage your computer or result in the loss of data.
Page 280: Error Message Examples
Another user is logged onto the computer as an administrator and using the TOSHIBA RAID Console utility. Only one administrator can use the TOSHIBA RAID Console utility on your computer at one time. The number of connectable units has been exceeded.
Page 281: Chapter 8: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter.
Page 282 If Something Goes Wrong Problems that are easy to fix To close a program that has stopped responding: Press Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 283: Problems When You Turn On The Computer
Open Notepad (click Start, point to All Programs, then point to Accessories and click Notepad). Press Ctrl Notepad. Add a paragraph break and type some notes describing what you were doing when you received the message, and how the error can be reproduced. Save the file and refer to it when you contact the software manufacturer.
Page 284 If Something Goes Wrong Problems when you turn on the computer returns you to the problem instead of restarting the system. To clear the condition, press Clearing the condition may get the computer running, but it will not solve a resource conflict. Read both the documentation that came with the conflicting device and “Resolving a hardware conflict”...
Page 285: The Windows Operating System Is Not Working
The Windows The computer displays the Make sure there is no diskette in the optional external diskette drive. If there is one, remove it and press any key to continue. If pressing any key does not work, press restart the computer. For more information, see computer is not accessing the hard disk or the external diskette drive.”...
Page 286 If Something Goes Wrong The Windows To open the Startup menu: Restart your computer. Press starts loading. The Windows options: ❖ Safe Mode ❖ Safe Mode (with Networking) ❖ Safe Mode (with Command Prompt) ❖ Enable Boot Logging ❖ Enable VGA Mode ❖...
Page 287: Internet Problems
Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu or by going to If Something Goes Wrong ® operating system is not working ® XP Help and Support: pcsupport.toshiba.com...
Page 288: Resolving A Hardware Conflict
If Something Goes Wrong Resolving a hardware conflict Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ® Windows Help and Support to troubleshoot the problem first.
Page 289: Resolving Hardware Conflicts On Your Own
Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 290: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 291 Checking device properties Device Manager provides a way to view the properties of a device. Properties include the name of the manufacturer, the type of device, the drivers installed, and the system resources assigned to the device. To check a device’s properties: Open the Start menu, then click Control Panel.
Page 292: Memory Problems
If Something Goes Wrong Resolving a hardware conflict Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, then click Turn off computer. Click Turn Off. The operating system shuts down and turns off the computer automatically.
Page 293: Power And The Batteries
Power and the batteries Your computer receives its power through the AC adapter and power cord/cable or from the system batteries (main battery and real-time clock (RTC) battery). Power problems are interrelated. For example, a faulty AC adapter or power cord/ cable will neither power the computer nor recharge the batteries.
Page 294 This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. current on the most recent software and hardware options for your computer, and for other product information.
Page 295: Keyboard Problems
Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself. The keyboard produces unexpected characters. A keypad overlay may be on. If the numeric keypad or cursor control light is on, press the cursor control light or press turn off the numeric keypad light.
Page 296 If Something Goes Wrong Resolving a hardware conflict problem, press display priority to its previous setting. HINT: Holding the Fn key and pressing the F5 key several times will advance you through the display options. If you are using an external monitor: ❖...
Page 297 A message tells you that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display.
Page 298: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict Over a period of time, and depending on the usage of the NOTE computer, the brightness of the LCD Screen will deteriorate. This is an intrinsic characteristic of LCD technology. The screen may be dimmer when the computer is operated on battery power, and you may not be able to increase the brightness of the screen until you plug the computer into AC power again.
Page 299 You can choose one or both options: ❖ Automatically fix file system errors ❖ Scan for and attempt recovery of bad sectors Click Start. Error-checking runs the test. Your hard disk seems very slow. If you have been using your computer for some time, your files may have become fragmented.
Page 300: Dvd-Rom Or Multi-Function Drive Problems
If Something Goes Wrong Resolving a hardware conflict The computer displays the message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette.
Page 301: Sound System Problems
Some discs run correctly, but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVD- ROM, DVD-R (read-only), plus CD-ROM, CD-R (read- only), and CD-RW (read-only). If the problem is with an application CD-ROM, refer to the software’s documentation and check that the hardware configuration meets the program’s needs.
Page 302 If Something Goes Wrong Resolving a hardware conflict these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. “Inserting and removing PC Cards” on page 154 more information. Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS).
Page 303 ❖ Occasionally a defective PC Card slips through quality control. If another PCMCIA-equipped computer is available, try the card in that machine. If the card malfunctions again, it may be defective. Resolving PC Card problems Here are some common problems and their solutions: The slots appear to be dead.
Page 304 If Something Goes Wrong Resolving a hardware conflict Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Double-click the PC Card icon on the taskbar. Click Safely remove xxxx, where xxxx is the identifier for your PC Card.
Page 305: Printer Problems
Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on, and ready (online). Check that the printer has plenty of paper. Some printers will not start printing when there are just two or three sheets of paper left in the tray.
Page 306: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba web site at Develop good computing habits Make sure you are prepared.
Page 307: If You Need Further Assistance
On a regular basis, back up the information stored on your hard disk. Here are some ways you can do this: ❖ Copy files to diskette, following the steps in work” on page ❖ Connect a tape drive to the system and use specialized software to copy everything on the hard disk to a tape.
Page 308: Before You Contact Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 309: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 310: Toshiba's Worldwide Offices
Germany Toshiba Europe GmbH Leibnizstraße 2 D-93055 Regensburg Germany Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A. de C.V. Sierra Candela No.111, 6to. Piso Col. Lomas de Chapultepec. CP 11000 Mexico, DF.
Page 311 United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. If Something Goes Wrong Toshiba’s worldwide offices United Kingdom Toshiba Information Systems (U.K) Ltd.
Page 312: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on or above the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 313: Instant Password Security
The power usage profiles are: Full Power, High Power, Normal, DVD Playback, Presentation, and Long Life. Sample power usage modes The properties of each mode are set in the Toshiba Power Saver utility. For more information, see Computing” on page Hot Keys Instant password security 117.
Page 314: Stand By Mode
Hot Keys Stand By mode Stand By mode This hot key places the computer into Stand By mode. A message box is displayed, by default, to confirm that the computer is going into Stand By mode. You can choose not to display this message box. Sample Stand By confirmation box For more information about Stand By mode, please see “Using Stand By Mode”...
Page 315: Hibernation Mode
Hibernation mode This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default), a message box is displayed by default to confirm the computer is going into Hibernation mode. The message box can be set so it does not display. Sample Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond.
Page 316: Display Modes
Hot Keys Display modes Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 317: Enabling A Wireless Device
Enabling a wireless device This hot key enables/disables the optional wireless devices in your computer (for systems with Wi-Fi or Bluetooth The wireless modes are: Bluetooth Bluetooth Wi-Fi enabled—This enables only the Wi-Fi module. Enable all devices—This enables all devices. Disable all devices—This disables all devices.
Page 318: Disabling Or Enabling The Touchpad
This hot key turns the Zooming utility to zoom-in. For more information, see on page This hot key turns the Zooming utility to zoom-out. For more information, see Utility” on page “Disabling or enabling the “TOSHIBA Zooming Utility” 246. “TOSHIBA Zooming 246.
Page 319: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors The computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved United Kingdom...
Page 320: Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 321: Getting Started
All Programs, TOSHIBA, Networking, ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. 334. ® ® Windows XP or 2000) Click the Start Getting Started 331.
Page 322 Using ConfigFree™ with your Toshiba Computer Getting Started ❖ Click the ConfigFree icon click the desired utility. If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop.
Page 323: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer Sample ConfigFree Launcher Auto-hide mode setting Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 324 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ Routers, hubs, and bridges ❖ Access points The Connectivity Doctor displays the following information: ❖ WEP (Used, not Used) ❖ Wired connection line (link speed) ❖ Wireless connection line (signal strength and link speed) ❖...
Page 325 Using ConfigFree™ with your Toshiba Computer Sample viewing device information If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 326: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Options About Help Close Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth devices currently used in the neighborhood, and displays information about them on a virtual map.
Page 327 Using ConfigFree™ with your Toshiba Computer connection. Placing the pointer over the displayed “point of light” shows detailed information about the wireless device. The wireless device shown near the center of the map is not NOTE necessarily near your notebook computer. If a wireless device located a distance away also has a strong signal, it appears near the center of the map as well.
Page 328 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Drag and drop the device you want to connect to the PC icon at the center of the map.The Wireless Settings screen appears. Sample dragging a device to the Access Point Sample Wireless settings screen...
Page 329 Using ConfigFree™ with your Toshiba Computer Enter the SSID/WEP information and connect to the device. After the Access Point is setup and added to the connection NOTE list, the system displays the Connection screen rather than the Wireless settings screen.
Page 330 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Transferring files using Bluetooth There are several ways to use Bluetooth to send files to other devices. To select the device using the Bluetooth radar screen: ❖ Open the Bluetooth radar screen, and drag and drop the file directly onto the icon for that Bluetooth device.
Page 331: Profile Settings
Using ConfigFree™ with your Toshiba Computer Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth device To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 332 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities office and at home can set up profiles to handle these networking environments. A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: ❖...
Page 333 Using ConfigFree™ with your Toshiba Computer Click the icon at the bottom of the screen to display more capture options. Under Captured Items, select the items you want to capture for this profile. If connecting with a wireless network, select the desired Auto Switch Settings.
Page 334: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 335 Using ConfigFree™ with your Toshiba Computer ❖ Wireless LAN via Access Point ❖ Wireless LAN via Ad-Hoc ❖ LAN (same subnet) ❖ Bluetooth PAN/LAP ❖ Cross cable (Ethernet or Gbit Ethernet) To host a ConfigFree SUMMIT, click the SUMMIT icon on the ConfigFree Launcher, select the users that you want to attend the SUMMIT meeting, and send them an invitation.
Page 336 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon.
Page 337 Using ConfigFree™ with your Toshiba Computer ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center...
Page 338 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Using ConfigFree SUMMIT To host a ConfigFree SUMMIT: Click the Click SUMMIT. Other users appear on the SUMMIT main window. SUMMIT can also be started from the ConfigFree Launcher. NOTE Select the appropriate users and invite them to the SUMMIT meeting.
Page 339: Quick Connect
(DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 340 Click OK. The default connection setting is for Ad hoc mode, therefore, if NOTE the setting on the Toshiba Wireless Projector is in Infrastructure mode, it will not connect, however; you can change the settings to Infrastructure mode to match the settings on the projector.
Page 341 Using ConfigFree™ with your Toshiba Computer ❖ If you select Toshiba Wireless Projector (DPJ) from the ConfigFree tray menu (this disconnects the wireless LAN connection) ❖ If you select a profile from the ConfigFree tray menu or when you disable a wireless device ❖...
Page 342: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 343: Semi-Automatic Switch Feature
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears. You can then click this window to connect using the settings specified in the profile.
Page 344: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms These acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory complementary metal-oxide semiconductor...
Page 345 direct current direct memory access DIMM dual inline memory module disk operating system dots per inch DSTN dual supertwist nematic digital versatile (or video) disc DVD-ROM digital versatile (or video) disc read-only memory enhanced capabilities port EPROM erasable programmable read-only memory file allocation table Federal Communications Commission fast infrared...
Page 346 Glossary SCSI DDRAM SRAM SVGA Terms These terms may appear in this user’s guide. active-matrix display—A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 347 application—A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup—A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged. basic input/output system (BIOS)—See BIOS.
Page 348 Glossary byte—A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache—A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory.
Page 349 controller—A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU—See central processing unit (CPU). CPU cache—A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 350 Glossary disk—A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive—The device that reads and writes information and programs on a diskette or hard disk.
Page 351 emulation—A technique in which a device or program imitates another device or program. enable—To turn on a computer option. See also disable. executable file—A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension.
Page 352 Compare software. Hibernation—A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was in when the computer was turned off.
Page 353 interlaced—A method of refreshing a computer screen, in which only every other line of pixels is refreshed. Interlaced monitors take two passes to create a complete screen image. Compare non-interlaced. internal device—See device. Internet—The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services.
Page 354 Glossary megabyte (MB)—A unit of data equal to 1,048,576 bytes (1024 x 1024 bytes). See also bytes. memory—Typically refers to the computer’s main memory, where programs are run and data is temporarily stored and processed. Memory can be volatile and hold data temporarily, such as RAM, or it can be nonvolatile and hold data permanently, such as ROM.
Page 355 online—Available through the computer. Online may refer to information being read from your own computer’s hard disk, such as online documentation or online help, or to information coming from another company on a company network or the Internet. operating system—A set of programs that controls how the computer works.
Page 356 Glossary program—A set of instructions that can be executed by a computer. The general classes of programs (also called software) are operating system, application, and utility. See also operating system, application, utility. properties—The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date.
Page 357 serial—Processes that occur one at a time. In communications, it means the transmission of one bit at a time sequentially over a single channel. On your computer, the serial port provides a serial interface between a computer and an appropriate device. Compare parallel. shortcut—See keyboard shortcut.
Page 358 Glossary Web—See World Wide Web. Wi-Fi—A registered trademark owned by the Wireless Capability Ethernet Alliance which stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www)—The worldwide network of Web sites linked together over the Internet.
Page 359: Index
Index Numerics 101-key keyboard 88 AC adapter 52 AC power cable connectors 319 accessories carrying cases 84 memory 61 Alt keys 89 antenna connecting 80 arm/wrist strain 46 audio .wav files 150 features 150 Auto-Run 105 avoiding injury 44 backing up files 87 battery alarms 125 changing 128...
Page 360 Index CD/DVD creating 106 inserting 103 problem solving 301 channels DMA 289 IRQ 289 character keys 88 charging the battery 55 checking device properties 291 click 60 communications network connection 143 system resources 289 compact discs inserting 103 problem solving 301 removing 107 computer non-system disk or disk error...
Page 361 screen is blank 295 display device connecting 72 display modes hot key 316 display panel closing 84 opening 56 disposal information 27 disposing of used batteries 134 DMA (Direct Memory Access) 289 double-click 60 DVD-ROM or multi-function drive cannot access disc 300 drive tray will not open 300 inserting discs 103 problems 300...
Page 362 Index using 153 Help Windows XP Media Center Edition 287 Hibernation mode 110 configuring 112 methods 111 starting again from 113 Hibernation mode hot key 315 hot key display modes 316 functions 312 Hibernation mode 315 keyboard 318 keyboard overlays 318 power usage mode 313 Stand By mode 314 volume mute 312...
Page 363 LCD power-saver 84 lighting 45 main battery changing 128 removing 129 memory expansion slots 62 problem solving 292 removing expansion slot cover memory module inserting 64 removing 66 microphone 151 built-in 151 Microsoft Support Online Web site modem determining COM port 140 problem solving 306 resetting port to default settings upgrading 140...
Page 364 301 computer hangs when PC Card inserted 303 computer will not power up 283 contacting Toshiba 308 corrupted/damaged data files Device Manager 290 disabling a device 290 disk drive is slow 299 display is blank 295...
Page 365 PC Card 301 checklist 302 error occurs 304 hot swapping fails 304 not recognized 304 slots appear dead 303 power and batteries 293 printer 305 program not responding 281 program not working properly screen does not look right/ flickers 296 system resources 289 trouble prevention 306 URL address not found 287...
Page 366 139 television connecting 72 Toshiba Internet Web sites 309 Toshiba Assist 238 Toshiba Hardware Setup 245 Toshiba online resources 116 Toshiba utilities 232 traveling tips 135 turning off the computer 82 turning on the power 57 TV antenna port 80...
Page 367 Index xD-Picture Card 157...

This manual is also suitable for:

Qosmio g25 Pqg20u-10k00e Qosmio g25 series

Toshiba G25-AV513 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Getting to Know the Windows XP Media Center Edition 2005

Chapter 6: Toshiba Utilities

Chapter 7: Using the RAID-0 or RAID-1 Utility

Chapter 8: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba G25-AV513

Summary of Contents for Toshiba G25-AV513