Table of Contents
Advertisement
Available languages
Available languages
External unit (continued)
USB operations
MP3
The USB connectivity enables you to connect and play MP3 tracks from
USB mass storage class. Typically, USB memory devices (Bulk only
transfer).
Preparation:
Before connecting any USB mass storage device to the unit, ensure that
the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The device
connected via the cable will not be recognised by this unit.
Reduce the volume and connect the USB mass storage device.
USB enabled device (not included)
DEMO
Press [USB q/h] or [OK] to start play.
To
Action
pause play
Press [USB q/h].
Press again to resume play.
stop play
Press [g].
"RESUME" is displayed. The position is
memorized.
Press [USB q/h] to resume play.
OR
Press [g] again to clear the position.
skip track
Press [u/t] or [y/i].
skip album
Press [e, r, ALBUM] in the play mode.
Press [e, r, ALBUM] once and then the
numeric buttons in the stop mode.
direct access play
Press [e, r, ALBUM] to select the album.
(Play starts with the
Press [y/i] once and then press the
track you select.)
numeric buttons to select the desired track.
Display function
Press [DISPLAY] repeatedly during play or pause.
Elapsed play
Remaining play
time
time
Press [MP3 INFO] repeatedly during play or pause.
ID3 (Album)
MP3
Elapsed play time
For other operating functions, they are similar as those described in "Disc
operations" (➡ page 8 and 9).
To remove the USB mass storage device
Select a source other than "USB".
Removing the USB mass storage device with it selected as a source can
damage the data stored in the device.
VOLUME
Album name
Track name
ID3 (Track)
ID3 (Artist)
Compatible devices
Devices which are defined as USB mass storage class:
•
USB devices that support bulk only transfer.
•
USB devices that support USB 2.0 full speed.
Supported format
Files must have the extension ".mp3" or ".MP3".
Note
•
CBI (Control/Bulk/Interrupt) is not supported.
•
A device using NTFS file system is not supported
[Only FAT 12/16/32 (File Allocation Table 12/16/32) file system is
supported].
•
Depending on the sector size, some files may not work.
•
This unit can access up to 255 albums and 2500 tracks.
•
The maximum number of tracks in a folder are 999 tracks.
•
Only one memory card will be selected when connecting a
multiport USB card reader. Typically the first memory card inserted.
•
Disconnect the USB card reader from the unit when you remove
the memory card. Failure to do so may cause malfunction to the
device.
•
When you connect your digital audio player to the USB port, it
charges all the time when the unit is on.
Changing the main unit and remote
control mode
The remote control and main unit are factory-set to "REMOTE 1" mode.
If you find the remote control unintentionally also controls other
equipment, you can switch to operate in "REMOTE 2" mode.
To switch to "REMOTE 2" mode
Press [FM/AM/AUX] to enter AUX mode.
(While pressing [FM/AM/AUX] on the main unit)
Press and hold [2] until "REMOTE 2" appears on the main unit
display.
MP3
Press and hold [OK] followed by [2] for at least 2 seconds.
INFO
The main unit and remote control are now set to operate in
"REMOTE 2" mode.
To return to "REMOTE 1" mode
Perform steps 1 to 3 but use [1] instead of [2] for steps 2 and 3.
("REMOTE 1" appears on the main unit during step 2.)
The remote control cannot work with the main unit if their modes
are different.
"REMOTE 1" or "REMOTE 2" appears on the main unit when you
operate the remote control.*
* If "REMOTE 1" appears (The main unit is in "REMOTE 1" mode.)
Press and hold [OK] followed by [1] on the remote control for at least
2 seconds.
If "REMOTE 2" appears (The main unit is in "REMOTE 2" mode.)
Press and hold [OK] followed by [2] on the remote control for at least
2 seconds.
13
13
Hide quick links:
Advertisement
Chapters
Table of Contents
