Appendix; Precautions; Error Messages - Sony HDC2500 Operation Manual
Hd color camera
Hide thumbs
Also See for HDC2500:
- Brochure (4 pages) ,
- Technical information (73 pages) ,
- Operation manual (79 pages)
Table of Contents
Advertisement
Appendix
Precautions
Note on laser beams
Laser beams may damage the CCDs. If you shoot a scene
that includes a laser beam, be careful not to let a laser beam
become directed into the lens of the camera.
Do not subject to severe shocks
Damage to the case or internal components may result.
When finished using
Set the power switch to OFF.
Operation and storage environment
Store in a level place with air conditioning.
If the unit gets wet, make sure it is completely dry before
storage.
Avoid use or storage in the following places:
• Extremely hot or cold places
• Places with high humidity
• Places with strong vibration
• Near strong magnetic fields
• In places where it receives much direct sunlight, or near
heating equipment
Condensation
If you move the camera from a very cold place to a warm
place, or use it in a damp location, condensation may form on
the lens or inside the camera.
The camera has no built-in condensation indicator. If you find
condensation on the body or lens, switch the camera off and
wait for the condensation to disappear for about one hour.
Phenomena Specific to CCD Image Sensors
The following phenomena that may appear in images are
specific to CCD (Charge Coupled Device) image sensors.
They do not indicate malfunctions.
White flecks
Although the CCD image sensors are produced with high-
precision technologies, fine white flecks may be generated on
the screen in rare cases, caused by cosmic rays.
This is related to the principle of CCD image sensors and is not
a malfunction.
The white flecks especially tend to be seen
• when operating at a high environmental temperature
• when you have raised the master gain (sensitivity)
This product has a compensation function and the problem
may be alleviated by automatic black balance adjustment (see
page 24).
Smear
When an extremely bright object, such as a strong spotlight or
flashlight, is being shot, vertical tails may be produced on the
screen, or the image may be distorted.
Aliasing
When fine patterns, stripes, or lines are shot, they may appear
jagged or flicker.
Error Messages
If a problem occurs during operation, a warning message is
displayed.
Note
To display a message, set the DISPLAY switch to DISPLAY or
MENU.
Message
TEMP WARNING
FAN STOP
SET SYSTEM CLOCK
OHB BLOCK NG!
MSU RPN BUSY
VF RPN BUSY
NO USB FLASH DRIVE
USB FLASH DRIVE ERROR
FORMAT ERROR!
WRITE PROTECTED
FILE ERROR
OTHER MODEL'S FILE
FILE NOT FOUND
Meaning
The internal temperature is
abnormally high.
The built-in fan is not rotating
properly.
The time/date of the internal
clock have not been set.
A problem is detected in the
optical block.
RPN compensation was
attempted using the camera
menu while being operated from
an external device.
Consult Sony service personnel.
RPN compensation was
attempted from an external
device while being operated
using the camera menu.
Consult Sony service personnel.
A USB drive operation was
attempted with no USB drive
connected.
An error occurred during access
to a USB drive.
A USB drive operation was
attempted with an unformatted
USB drive.
File writing was attempted with a
write-protected USB drive.
An error occurred while reading
a file from a USB drive.
You attempted to read a file of
other models having no
compatibility.
The file you attempted to read
does not exist in the USB drive.
Appendix
61
Hide quick links:
Advertisement
Table of Contents
