Tv Camport Auto Sense Operation - LG 22LG3DDH Setup Manual
Hospital tv
Hide thumbs
Also See for 22LG3DDH:
- Owner's manual (148 pages) ,
- Service manual (36 pages) ,
- Commercial mode setup manual (47 pages)
Table of Contents
Advertisement
The Camport Auto Sense function is enabled when:
1. Installer Menu item 34 CAMPORT EN is set to 1 AND
2. Installer Menu item 40 AUTO CAMPORT is enabled (1).
Selectable: Can be accessed with INPUT key, direct
access, etc.
Auto Sense: TV switches to this input when connector is
inserted. The Camport (Side [AV IN 2] Video) has the highest
priority and will override any commands including tuning to
the Start Channel.
Camport Operation (Stand-alone)
When Camport Auto Sense is enabled as above, the TV
will switch from its current source to the Side (AV IN 2)
Video input whenever a plug is inserted into the AV IN 2
Video input.
When the video plug is removed, the TV will switch back to
the previous source that was being displayed before the
plug was inserted. However, if any direct access to an RF
channel or Aux channel is requested while the Camport is
active, then, when the video plug is removed, the TV will
switch to the last requested channel. Source changes
using any Source keys (INPUT) are ignored. Channel Up/
Down and Flashback commands are not direct access
tuning commands, and they are also ignored.
Camport Operation (PPV)
The operation will be similar to that of the Stand-alone
Mode. However, when the Channel Map is maintained
external to the PTC (i.e., PPV), Channel Up/Down or
Flashback keys are sent as Direct Access tuning com-
mands to the PTC/TV.
206-4190
Reference: TV Camport Auto Sense Operation
CAMPORT (Side Video) Functionality Control
CAMPORT EN
Previous State
Before Inserting
Previous State
Before Inserting
(26/32LG3DDH and 42LD6DDH TVs Only)
Item 034
Item 040
AUTO CAMPORT
0
0
1
1
Operation While
CAMPORT is
CAMPORT
Active
Aux or RF
None
Channel
Aux or RF
Direct Access
Channel
Ch Up/Down,
Aux or RF
Flashback, and
Channel
Input Keys
Operation While
CAMPORT is
CAMPORT
Active
Aux or RF
None
Channel
Aux or RF
Direct Access
Channel
Ch Up/Down,
Aux or RF
Flashback, and
Channel
Input Keys
Side (AV IN 2)
Video Operation
0
Disabled
1
Disabled
0
Selectable
1
Auto Sense
State Upon
Removal of
CAMPORT
Previous Aux
or RF Channel
Last Requested
Aux or RF Channel
Previous Aux
or RF Channel
State Upon
Removal of
CAMPORT
Previous Aux
or RF Channel
Last Requested
Aux or RF Channel
Last Requested Aux
or RF Channel
37
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
