Opening the display
The computer's LCD display panel can be rotated in a wide range of angles
for optimal viewing.
1. While holding down the palm rest with one hand so that the main body
is not raised, lift the panel slowly. Adjust the angle of the panel to
provide optimal clarity.
As the display panel cannot be opened until 180 degrees, please be
careful of the angle when flipping open the display panel.
Use reasonable care when opening and closing the LCD display panel.
Opening it vigorously or slamming it shut could damage the computer.
Turning on the power
This section describes how to turn on the power.
The Power button LED indicates the status. Refer to the
section in Chapter 6, Power and Power-Up Modes.
■
After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Refer to the section
the first
■
If the USB floppy disk drive is connected, make sure it is empty. If a
floppy disk is in the drive, press the eject button and remove the floppy
disk.
PORTÉGÉ R200
Opening the LCD display panel
time.
Getting Started
LCD display panel
Power indicator
Starting up for
3-9