A
B
How to take up tape slack
C
To protect tapes against further recording
Side A
Tab for side "B"
To re-record
Normal position tape
20
RQT5258
Tab for side "A"
Hi-position tape
Detection hole
Listening to tapes
To fast-forward or rewind the tape A
Press [g/(] or [)/f] in the stop mode.
Tape direction
To rewind
" 3"
[g/(]
"4"
[)/f]
To find the beginning of a program
(TPS: Tape Program Sensor) A
TPS finds the beginning of a track and resumes play from there. Each
press increases the number of tracks skipped, up to a maximum of 9.
Press [g/(] or [)/f] during play.
Notes
The TPS function searches for silent parts of about 4 seconds in
length which are normally found between tunes. As a result, it may not
function properly in the following cases:
•
With short silent parts
•
When noise occurs between tunes
•
With silent parts found within tunes
Concerning cassette tapes
Selection of cassette tapes
Tapes can get caught on the capstans. Use caution with the following
types of tapes.
Cassette tapes exceeding 100 minutes
Tapes are made of a thin film material. Do not repeatedly advance
and stop the tape, fast-forward it or rewind it.
Endless-tapes
For this unit, it is recommended to use tapes which are appropriate to
the auto reverse mechanism.
Always read the instructions provided with your tapes.
Tape slack B
Tape slack may cause the tape to break.
Erasure prevention C
Use a screwdriver or similar object to break out the tab.
To re-record on a protected cassette
Cover the hole with adhesive tape.
Do not cover the detection hole on hi-position tapes.
Storage precautions
Do not place or store tapes in the following places:
•
In high temperature (35°C or higher) or high humidity (80% or
higher) areas
•
In a strong magnetic field (near a speaker, on top of a TV, etc.)
This can erase a recording.
•
Locations exposed to direct sunlight
To fast-forward
[)/f]
[g/(]